From: Nick Pelly <npelly@google.com>
To: linux-bluetooth@vger.kernel.org
Cc: Nick Pelly <npelly@google.com>
Subject: Re: [PATCH] Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.
Date: Mon, 15 Feb 2010 13:15:34 -0800 [thread overview]
Message-ID: <35c90d961002151315i5fc0f5b9y36aaba4415987a2f@mail.gmail.com> (raw)
In-Reply-To: <35c90d961002111159h6727bc2cw28b55ce6e919fb4f@mail.gmail.com>
On Thu, Feb 11, 2010 at 11:59 AM, Nick Pelly <npelly@google.com> wrote:
> On Thu, Feb 11, 2010 at 11:54 AM, Nick Pelly <npelly@google.com> wrote:
>> __u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise
>> selection of SCO/eSCO packet types as per the Packet_Type parameter in
>> HCI Setup Synchrnous Connection Command.
>>
>> 0x0001 HV1 may be used.
>> 0x0002 HV2 may be used.
>> 0x0004 HV3 may be used.
>> 0x0008 EV3 may be used.
>> 0x0010 EV4 may be used.
>> 0x0020 EV5 may be used.
>> 0x0040 2-EV3 may not be used.
>> 0x0080 3-EV3 may not be used.
>> 0x0100 2-EV5 may not be used.
>> 0x0200 3-EV5 may not be used.
>>
>> We've followed the Bluetooth SIG convention of reversing the logic on the
>> EDR bits.
>>
>> Packet type selection is just a request made to the Bluetooth chipset, and
>> it is up to the link manager on the chipset to negiotiate and decide on the
>> actual packet types used. Furthermore, when a SCO/eSCO connection is eventually
>> made there is no way for the host stack to determine which packet type was used
>> (however it is possible to get the link type of SCO or eSCO).
>>
>> sco_pkt_type is ignored for incoming SCO connections. It is possible
>> to add this in the future as a parameter to the Accept Synchronous Connection
>> Command, however its a little trickier because the kernel does not
>> currently preserve sockaddr_sco data between userspace calls to accept().
>>
>> Typically userspace just wants to select eSCO or SCO packet types, which can be
>> done with the new constants ALL_SCO_PKTS or ALL_ESCO_PKTS. If sco_pkt_type is
>> zero, or userspace uses the old sockaddr_sco structure size, then ALL_ESCO_PKTS
>> will be selected as default.
>>
>> This patch is motivated by broken Bluetooth carkits such as the Motorolo
>> HF850 (it claims to support eSCO, but will actually reject eSCO connections
>> after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio
>> if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain
>> a blacklist of packet types to workaround broken remote devices such as these.
>>
>> Signed-off-by: Nick Pelly <npelly@google.com>
>> ---
>> include/net/bluetooth/hci.h | 7 +++-
>> include/net/bluetooth/hci_core.h | 7 +++-
>> include/net/bluetooth/sco.h | 4 ++-
>> net/bluetooth/hci_conn.c | 25 +++++++++------
>> net/bluetooth/hci_event.c | 6 ++-
>> net/bluetooth/l2cap.c | 2 +-
>> net/bluetooth/sco.c | 61 +++++++++++++++++++++++++------------
>> 7 files changed, 74 insertions(+), 38 deletions(-)
>>
>> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>> index 4f7795f..72efc94 100644
>> --- a/include/net/bluetooth/hci.h
>> +++ b/include/net/bluetooth/hci.h
>> @@ -139,8 +139,11 @@ enum {
>> #define ESCO_2EV5 0x0100
>> #define ESCO_3EV5 0x0200
>>
>> -#define SCO_ESCO_MASK (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
>> -#define EDR_ESCO_MASK (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
>> +#define SCO_ESCO_MASK (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
>> +#define EDR_ESCO_MASK (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
>> +
>> +#define ALL_SCO_PKTS (SCO_ESCO_MASK | EDR_ESCO_MASK)
>> +#define ALL_ESCO_PKTS (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
>>
>> /* ACL flags */
>> #define ACL_START 0x00
>> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
>> index b6d36cb..cbcc5b1 100644
>> --- a/include/net/bluetooth/hci_core.h
>> +++ b/include/net/bluetooth/hci_core.h
>> @@ -326,12 +326,15 @@ void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
>> void hci_add_sco(struct hci_conn *conn, __u16 handle);
>> void hci_setup_sync(struct hci_conn *conn, __u16 handle);
>>
>> -struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
>> +struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
>> + __u16 pkt_type, bdaddr_t *dst);
>> int hci_conn_del(struct hci_conn *conn);
>> void hci_conn_hash_flush(struct hci_dev *hdev);
>> void hci_conn_check_pending(struct hci_dev *hdev);
>>
>> -struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type);
>> +struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
>> + __u16 pkt_type, bdaddr_t *dst,
>> + __u8 sec_level, __u8 auth_type);
>> int hci_conn_check_link_mode(struct hci_conn *conn);
>> int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
>> int hci_conn_change_link_key(struct hci_conn *conn);
>> diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h
>> index e28a2a7..924338a 100644
>> --- a/include/net/bluetooth/sco.h
>> +++ b/include/net/bluetooth/sco.h
>> @@ -37,6 +37,7 @@
>> struct sockaddr_sco {
>> sa_family_t sco_family;
>> bdaddr_t sco_bdaddr;
>> + __u16 sco_pkt_type;
>> };
>>
>> /* SCO socket options */
>> @@ -72,7 +73,8 @@ struct sco_conn {
>>
>> struct sco_pinfo {
>> struct bt_sock bt;
>> - __u32 flags;
>> + __u16 pkt_type;
>> +
>> struct sco_conn *conn;
>> };
>>
>> diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
>> index fa8b412..8ced057 100644
>> --- a/net/bluetooth/hci_conn.c
>> +++ b/net/bluetooth/hci_conn.c
>> @@ -196,7 +196,8 @@ static void hci_conn_idle(unsigned long arg)
>> hci_conn_enter_sniff_mode(conn);
>> }
>>
>> -struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
>> +struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
>> + __u16 pkt_type, bdaddr_t *dst)
>> {
>> struct hci_conn *conn;
>>
>> @@ -221,14 +222,16 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
>> conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
>> break;
>> case SCO_LINK:
>> + if (!pkt_type)
>> + pkt_type = ALL_SCO_PKTS;
>> + case ESCO_LINK:
>> + if (!pkt_type)
>> + pkt_type = ALL_ESCO_PKTS;
>> if (lmp_esco_capable(hdev))
>> - conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
>> - (hdev->esco_type & EDR_ESCO_MASK);
>> + conn->pkt_type = pkt_type & hdev->esco_type;
>> else
>> - conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
>> - break;
>> - case ESCO_LINK:
>> - conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
>> + conn->pkt_type = (pkt_type << 5) & hdev->pkt_type &
>> + SCO_PTYPE_MASK;
>> break;
>> }
>>
>> @@ -340,7 +343,9 @@ EXPORT_SYMBOL(hci_get_route);
>>
>> /* Create SCO or ACL connection.
>> * Device _must_ be locked */
>> -struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 sec_level, __u8 auth_type)
>> +struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
>> + __u16 pkt_type, bdaddr_t *dst,
>> + __u8 sec_level, __u8 auth_type)
>> {
>> struct hci_conn *acl;
>> struct hci_conn *sco;
>> @@ -348,7 +353,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
>> BT_DBG("%s dst %s", hdev->name, batostr(dst));
>>
>> if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
>> - if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
>> + if (!(acl = hci_conn_add(hdev, ACL_LINK, 0, dst)))
>> return NULL;
>> }
>>
>> @@ -364,7 +369,7 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
>> return acl;
>>
>> if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
>> - if (!(sco = hci_conn_add(hdev, type, dst))) {
>> + if (!(sco = hci_conn_add(hdev, type, pkt_type, dst))) {
>> hci_conn_put(acl);
>> return NULL;
>> }
>> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
>> index 10edd1a..5343e0f 100644
>> --- a/net/bluetooth/hci_event.c
>> +++ b/net/bluetooth/hci_event.c
>> @@ -579,7 +579,7 @@ static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
>> }
>> } else {
>> if (!conn) {
>> - conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
>> + conn = hci_conn_add(hdev, ACL_LINK, 0, &cp->bdaddr);
>> if (conn) {
>> conn->out = 1;
>> conn->link_mode |= HCI_LM_MASTER;
>> @@ -964,7 +964,9 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
>>
>> conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
>> if (!conn) {
>> - if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
>> + /* pkt_type not yet used for incoming connections */
>> + if (!(conn = hci_conn_add(hdev, ev->link_type, 0,
>> + &ev->bdaddr))) {
>> BT_ERR("No memmory for new connection");
>> hci_dev_unlock(hdev);
>> return;
>> diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
>> index d056886..b342f06 100644
>> --- a/net/bluetooth/l2cap.c
>> +++ b/net/bluetooth/l2cap.c
>> @@ -955,7 +955,7 @@ static int l2cap_do_connect(struct sock *sk)
>> }
>> }
>>
>> - hcon = hci_connect(hdev, ACL_LINK, dst,
>> + hcon = hci_connect(hdev, ACL_LINK, 0, dst,
>> l2cap_pi(sk)->sec_level, auth_type);
>> if (!hcon)
>> goto done;
>> diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
>> index 77f4153..4976ad5 100644
>> --- a/net/bluetooth/sco.c
>> +++ b/net/bluetooth/sco.c
>> @@ -176,6 +176,7 @@ static int sco_connect(struct sock *sk)
>> {
>> bdaddr_t *src = &bt_sk(sk)->src;
>> bdaddr_t *dst = &bt_sk(sk)->dst;
>> + __u16 pkt_type = sco_pi(sk)->pkt_type;
>> struct sco_conn *conn;
>> struct hci_conn *hcon;
>> struct hci_dev *hdev;
>> @@ -192,10 +193,14 @@ static int sco_connect(struct sock *sk)
>>
>> if (lmp_esco_capable(hdev) && !disable_esco)
>> type = ESCO_LINK;
>> - else
>> + else {
>> type = SCO_LINK;
>> + pkt_type &= SCO_ESCO_MASK;
>> + pkt_type |= EDR_ESCO_MASK;
>> + }
>>
>> - hcon = hci_connect(hdev, type, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING);
>> + hcon = hci_connect(hdev, type, pkt_type, dst,
>> + BT_SECURITY_LOW, HCI_AT_NO_BONDING);
>> if (!hcon)
>> goto done;
>>
>> @@ -451,18 +456,22 @@ static int sco_sock_create(struct net *net, struct socket *sock, int protocol)
>> return 0;
>> }
>>
>> -static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
>> +static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
>> {
>> - struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
>> + struct sockaddr_sco sa;
>> struct sock *sk = sock->sk;
>> - bdaddr_t *src = &sa->sco_bdaddr;
>> - int err = 0;
>> + bdaddr_t *src = &sa.sco_bdaddr;
>> + int len, err = 0;
>>
>> - BT_DBG("sk %p %s", sk, batostr(&sa->sco_bdaddr));
>> + BT_DBG("sk %p %s", sk, batostr(&sa.sco_bdaddr));
>>
>> if (!addr || addr->sa_family != AF_BLUETOOTH)
>> return -EINVAL;
>>
>> + memset(&sa, 0, sizeof(sa));
>> + len = min_t(unsigned int, sizeof(sa), alen);
>> + memcpy(&sa, addr, len);
>> +
>> lock_sock(sk);
>>
>> if (sk->sk_state != BT_OPEN) {
>> @@ -476,7 +485,8 @@ static int sco_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_le
>> err = -EADDRINUSE;
>> } else {
>> /* Save source address */
>> - bacpy(&bt_sk(sk)->src, &sa->sco_bdaddr);
>> + bacpy(&bt_sk(sk)->src, &sa.sco_bdaddr);
>> + sco_pi(sk)->pkt_type = sa.sco_pkt_type;
>> sk->sk_state = BT_BOUND;
>> }
>>
>> @@ -489,26 +499,34 @@ done:
>>
>> static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen, int flags)
>> {
>> - struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
>> struct sock *sk = sock->sk;
>> - int err = 0;
>> -
>> + struct sockaddr_sco sa;
>> + int len, err = 0;
>>
>> BT_DBG("sk %p", sk);
>>
>> - if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct sockaddr_sco))
>> + if (!addr || addr->sa_family != AF_BLUETOOTH)
>> return -EINVAL;
>>
>> - if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND)
>> - return -EBADFD;
>> -
>> - if (sk->sk_type != SOCK_SEQPACKET)
>> - return -EINVAL;
>> + memset(&sa, 0, sizeof(sa));
>> + len = min_t(unsigned int, sizeof(sa), alen);
>> + memcpy(&sa, addr, len);
>>
>> lock_sock(sk);
>>
>> + if (sk->sk_type != SOCK_SEQPACKET) {
>> + err = -EINVAL;
>> + goto done;
>> + }
>> +
>> + if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) {
>> + err = -EBADFD;
>> + goto done;
>> + }
>> +
>> /* Set destination address and psm */
>> - bacpy(&bt_sk(sk)->dst, &sa->sco_bdaddr);
>> + bacpy(&bt_sk(sk)->dst, &sa.sco_bdaddr);
>> + sco_pi(sk)->pkt_type = sa.sco_pkt_type;
>>
>> if ((err = sco_connect(sk)))
>> goto done;
>> @@ -610,10 +628,13 @@ static int sco_sock_getname(struct socket *sock, struct sockaddr *addr, int *len
>> addr->sa_family = AF_BLUETOOTH;
>> *len = sizeof(struct sockaddr_sco);
>>
>> - if (peer)
>> + if (peer) {
>> bacpy(&sa->sco_bdaddr, &bt_sk(sk)->dst);
>> - else
>> + sa->sco_pkt_type = sco_pi(sk)->pkt_type;
>> + } else {
>> bacpy(&sa->sco_bdaddr, &bt_sk(sk)->src);
>> + sa->sco_pkt_type = sco_pi(sk)->pkt_type;
>> + }
>>
>> return 0;
>> }
>> --
>> 1.6.5.3
>>
>>
>
> BTW i'm happy to switch the logic on the EDR bits, such that 1 is
> always 'allow this packet type'. I stuck with the Bluetooth SIG
> convention in this patch because the logic actually came out cleanly.
>
> Either way, its confusing for userspace, and we should document it
> carefully in the patch to userspace headers.
Ping.
As a first step, can we get consensus on the userspace API:
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -139,8 +139,11 @@ enum {
+#define ALL_SCO_PKTS (SCO_ESCO_MASK | EDR_ESCO_MASK)
+#define ALL_ESCO_PKTS (SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5)
--- a/include/net/bluetooth/sco.h
+++ b/include/net/bluetooth/sco.h
@@ -37,6 +37,7 @@
struct sockaddr_sco {
sa_family_t sco_family;
bdaddr_t sco_bdaddr;
+ __u16 sco_pkt_type;
};
This will at least unblock my work.
Nick
next prev parent reply other threads:[~2010-02-15 21:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-11 19:54 [PATCH] Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections Nick Pelly
2010-02-11 19:59 ` Nick Pelly
2010-02-15 21:15 ` Nick Pelly [this message]
2010-02-17 9:30 ` Ville Tervo
2010-02-17 16:49 ` Nick Pelly
2010-02-17 17:31 ` Marcel Holtmann
2010-02-18 6:49 ` Ville Tervo
2010-02-18 23:47 ` Nick Pelly
2010-02-19 8:08 ` Ville Tervo
2010-02-19 21:23 ` Nick Pelly
2010-02-22 7:53 ` Ville Tervo
2010-02-26 1:05 ` Nick Pelly
2010-02-26 9:20 ` Iain Hibbert
2010-03-19 18:48 ` smcoe1
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35c90d961002151315i5fc0f5b9y36aaba4415987a2f@mail.gmail.com \
--to=npelly@google.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).