From: petr@palacky.net
To: "BlueZ users" <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] 3 or more BT dongles over 1 USB-2.0 4-port HUB
Date: Tue, 12 Sep 2006 19:09:36 +0200 (CEST) [thread overview]
Message-ID: <3612.89.176.57.95.1158080976.squirrel@mail.palacky.net> (raw)
In-Reply-To: <8712867d0609120643n7fd0d072o5b0bc88541f1ae39@mail.gmail.com>
Hi Jamie,
my USB HUB is with and can also operate without power supply.
Today i tried these HUB and dongles on the ARM board with Debian Linux and
kernel 2.4 and here can i set "UP" only one dongle (with or without extra
power supply).
This looks as hci_usb doesn't like USB 2.0 standards...
Petr P.
Dne 12 Z=E1=F8=ED 2006, 15:43, Jaime Alberto Silva napsal(a):
> Could it be a power problem? maybe your USB port can't supply enough
> power to all the devices.
>
> On 9/11/06, petr@palacky.net <petr@palacky.net> wrote:
>
>> Hi Marcel,
>>
>>
>> thank you for your tip.
>>
>> I tried loading hci_usb with option isoc=3D0, but still nothing happens.
>> I don't think if this is question for USB Guys, because other devices
>> eg. printer, mouse, keyboard, flash-disk etc. works fine and all
>> together attached into one USB HUB. I think this is problem with any
>> component from bluez stack...
>>
>> BR
>> Petr
>>
>>
>> Dne 11 Z=E1=F8=ED 2006, 20:10, Marcel Holtmann napsal(a):
>>
>>> Hi Petr,
>>>
>>>
>>>
>>>> i have problem with three (and more) USB BT dongles (all are the
>>>> same, CSR-based) and 4-port USB-2.0 HUB.
>>>>
>>>>
>>>>
>>>> When i attach one USB dongle alone, everything is good (hci0 is up
>>>> and running). When i attach the second dongle (after the first),
>>>> still is everything OK (hci0 and hci1 are up and running). But when
>>>> i attach third (or fourth) dongle, this does not work.
>>>>
>>>> I tried attaching all dongles differently but every time the third
>>>> (or
>>>> fourth) dongle is not OK and dmesg says: #dmesg
>>>> hci_usb_intr_rx_submit: hci2 intr rx submit failed urb cd55b674 err
>>>> -28
>>>>
>>>>
>>>
>>> try loading the hci_usb driver with the isoc=3D0 option. This maybe
>>> helps, but it can also be a general problem with your USB root hub. In
>>> that case you have to check with the USB guys, because this is not
>>> Bluetooth
>>> specific.
>>>
>>> Regards
>>>
>>>
>>>
>>> Marcel
>>>
>>>
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> ----
>>> Using Tomcat but need to do more? Need to support web services,
>>> security? Get stuff done quickly with pre-integrated technology to
>>> make your job easier Download IBM WebSphere Application Server v.1.0.1
>>> based on Apache Geronimo
>>> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D1216
>>> 42
>>> _______________________________________________
>>> Bluez-users mailing list
>>> Bluez-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>>
>>>
>>>
>>
>>
>>
>> -----------------------------------------------------------------------
>> --
>> Using Tomcat but need to do more? Need to support web services,
>> security? Get stuff done quickly with pre-integrated technology to make
>> your job easier Download IBM WebSphere Application Server v.1.0.1 based
>> on Apache Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D12164
>> 2
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>
>
> --
> Jaime Alberto Silva
> L I N U X .~.
> The Choice /V\
> of a GNU / ( ) \ Generation ^^-^^
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D121642
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easi=
er
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2006-09-12 17:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-11 19:46 [Bluez-users] 3 or more BT dongles over 1 USB-2.0 4-port HUB Petr Palacký
2006-09-11 18:10 ` Marcel Holtmann
2006-09-11 22:15 ` petr
2006-09-12 13:43 ` Jaime Alberto Silva
2006-09-12 17:09 ` petr [this message]
2006-09-30 19:33 ` Christian Schuglitsch
-- strict thread matches above, loose matches on Subject: below --
2006-09-20 10:22 SZABO Tamas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3612.89.176.57.95.1158080976.squirrel@mail.palacky.net \
--to=petr@palacky.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox