From: James Courtier-Dutton <James@superbug.demon.co.uk>
To: Cozza <ac2crp@blueyonder.co.uk>
Cc: bluez Dev <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] Bluetooth headset problems.
Date: Thu, 03 Jul 2003 13:36:13 +0100 [thread overview]
Message-ID: <3F04233D.3080106@superbug.demon.co.uk> (raw)
In-Reply-To: <004701c34153$0e650ba0$fd02a8c0@troll>
Cozza wrote:
> Hi,
>
> I believe that there is a problem with the hci-usb driver. I performed some
> brief investigations which I posted earlier to this mailing list.
>
> Are you using a USB device? I've used the same code and Bluetooth headset
> with a PC card Bluetooth adaptor and everything worked fine.
>
> Both Bluetooth devices use the CSR chipset, but the UART one using the BCSP
> protocol works whereas the USB one misses half the data packets, as you
> suggest.
>
> My earlier message was posted on 20th June, entitled "SCO problem with USB
> devices" - I'd be interested to see if your problem looks the same. I think
> it possibly is, from what you've posted.
>
> I haven't yet got around to investigating the problem with the USB stack -
> but I have the same problem, if it helps! If you are in a rush, then PC card
> devices seem to work at the moment...
>
> Regards,
>
> Colin
>
>
>
>
I looked at your previous email, and it seems that we both have exactly
the same problem. I will have to look into this further, because I think
it is better to get usb dongles working, than just use different
hardware. As you have already tried it in windows and it works, I will
proceed with that assumption, as I don't have windows to test with.
The "hstest" program in it's current state would never handle full
duplex, but at least I can maybe get the recording working.
I am using a USB dongle. Mitsumi WML-C52APR, contains FCC ID: POOWML-C06
Relevent info from usb.
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=03ee ProdID=6440 Rev= 3.09
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
hciconfig -a hci0
hci0: Type: USB
BD Address: 00:A0:96:1F:42:BF ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:99 acl:0 sco:0 events:13 errors:0
TX bytes:296 acl:0 sco:0 commands:12 errors:0
Features: 0xff 0xff 0x0f 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x135 LMP Ver: 1.1 (0x1) LMP
Subver: 0x135
Manufacturer: Cambridge Silicon Radio (10)
hcitool info 00:0A:D9:48:00:6E
Requesting information ...
BD Address: 00:0A:D9:48:00:6E
Device Name: HBH-30
LMP Version: 1.1 (0x1) LMP Subversion: 0x8b40
Manufacturer: Ericsson Mobile Comunications (0)
Features: 0x1c 0x28 0x01 0x00
<encryption> <slot offset> <timing accuracy> <SCO link>
<HV3 packets> <CVSD>
-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2003-07-03 12:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-02 13:18 [Bluez-devel] Bluetooth headset problems James Courtier-Dutton
2003-07-03 11:05 ` Cozza
2003-07-03 12:36 ` James Courtier-Dutton [this message]
2003-07-05 1:55 ` James Courtier-Dutton
2003-07-06 18:59 ` James Courtier-Dutton
2003-07-06 20:44 ` Marcel Holtmann
2003-07-06 22:11 ` James Courtier-Dutton
2003-07-06 22:16 ` Marcel Holtmann
2003-07-08 9:13 ` Cozza
2003-07-09 10:06 ` David Woodhouse
2003-07-21 22:30 ` Max Krasnyansky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F04233D.3080106@superbug.demon.co.uk \
--to=james@superbug.demon.co.uk \
--cc=ac2crp@blueyonder.co.uk \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox