From: "thomas.schorpp" <t.schorpp@gmx.de>
Cc: Marcel Holtmann <marcel@holtmann.org>,
BlueZ Mailing List <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] hci_acl_tx_to: hci0 ACL tx timeout, sco not the problem
Date: Tue, 06 Jan 2004 16:55:10 +0100 [thread overview]
Message-ID: <3FFADA5E.8050202@gmx.de> (raw)
In-Reply-To: <3FFACF71.70607@gmx.de>
thomas.schorpp wrote:
> Marcel Holtmann wrote:
>
>> Hi Thomas,
>>
>>
>>>> This is HCI 16.4 firmware and it should work fine. Do you use the SCO
>>>> audio support for the HCI USB driver? If yes, disable it, because I
>>>> heard of problems with ISOC transfers on VIA chips if I remember
>>>> correctly.
>>>
>>>
>>> NO sco module loaded(?)
>>
>>
>>
>> I am not talking about the sco module. I am talking about the SCO audio
>> option of the HCI USB driver. Disable it to avoid ISOC transfers.
>
>
> yes, ill check, i think it is disabled, wanted only pan from the
> beginning, thx a lot.
was enabled, now disabled, no change, stalled after 2 minutes transfer:
Jan 6 16:38:46 TOM1 pand[4118]: New connection from 00:10:60:A5:0F:DC bnep0
Jan 6 16:42:37 TOM1 kernel: hci_acl_tx_to: hci0 ACL tx timeout
Jan 6 16:42:37 TOM1 kernel: hci_acl_tx_to: hci0 killing stalled ACL
connection DC:0F:A5:60:10:00
trying alternate usb driver...
>
>>
>>
>>>> Use 2.4.23-mh1 or 2.4.24-mh1.
>>>
>>>
>>> roger that. what change do you think in the changelogs should target
>>> the problem?
>>
>>
>>
>> In general nothing will help here, but I must be sure that we talk about
>> the same version of the Bluetooth subsystem.
>
>
> yes, ill try the patches IF theyre considered stable.
> will also try another usb driver -WARNING- do not use via vt6202 ehci
> chipsets, they crashed my gatewaysystem reproducable on boot. :(
>
> but i wonder why the window$ stacks do not trigger the fault... maybe
> usb... have problems with sane scanner too :)
>
>>
>> Regards
>>
>> Marcel
>>
>>
>>
>>
>> -------------------------------------------------------
>> This SF.net email is sponsored by: IBM Linux Tutorials.
>> Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
>> Free Linux Tutorials. Learn everything from the bash shell to sys admin.
>> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
>> _______________________________________________
>> Bluez-devel mailing list
>> Bluez-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>
>>
>
> y
> tom
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
> Free Linux Tutorials. Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
>
next prev parent reply other threads:[~2004-01-06 15:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-05 22:23 [Bluez-devel] hci_acl_tx_to: hci0 ACL tx timeout, VIA USB HUBS thomas.schorpp
2004-01-06 0:30 ` [Bluez-devel] hci_acl_tx_to: hci0 ACL tx timeout, stalling next accept thomas.schorpp
2004-01-06 0:45 ` thomas.schorpp
2004-01-06 12:44 ` [Bluez-devel] hci_acl_tx_to: hci0 ACL tx timeout, VIA USB HUBS Marcel Holtmann
2004-01-06 12:57 ` thomas.schorpp
2004-01-06 13:38 ` Marcel Holtmann
2004-01-06 13:52 ` thomas.schorpp
2004-01-06 13:56 ` Marcel Holtmann
2004-01-06 15:08 ` thomas.schorpp
2004-01-06 15:55 ` thomas.schorpp [this message]
2004-01-06 20:03 ` [Bluez-devel] hci_acl_tx_to: hci0 ACL tx timeout, solved, kmod loaded wrong ALTERNATE uhci driver by default thomas.schorpp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FFADA5E.8050202@gmx.de \
--to=t.schorpp@gmx.de \
--cc="t.[NO_SPAM]schorpp"@gmx.de \
--cc=bluez-devel@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox