public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: "Liwei Sun" <sunliweis@126.com>
To: "Marcel Holtmann" <marcel@holtmann.org>,
	"Luiz Augusto von Dentz" <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
Date: Mon, 12 May 2025 10:31:03 +0800 (CST)	[thread overview]
Message-ID: <3fbcee73.2408.196c254dd8f.Coremail.sunliweis@126.com> (raw)

Apologies for this re-send. It appears my previous attempt to send this patch did not successfully reach the mailing lists (linux-bluetooth@vger.kernel.org and linux-kernel@vger.kernel.org), although some maintainers may have received it directly.
I am resending it now to ensure it is properly distributed to the lists for review and discussion.
If this one still fails, I may try another way to report the new hardware ID.


From 4bee2ec5648c48ec5fe62b230caf26985398b0e0 Mon Sep 17 00:00:00 2001
From: Liwei Sun <sunliweis@126.com>
Date: Thu, 1 May 2025 17:27:59 +0800
Subject: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922

A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[    3.151162] Bluetooth: Core ver 2.22
[    3.151185] Bluetooth: HCI device and connection manager initialized
[    3.151189] Bluetooth: HCI socket layer initialized
[    3.151191] Bluetooth: L2CAP socket layer initialized
[    3.151194] Bluetooth: SCO socket layer initialized
[    3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[    4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.676637] Bluetooth: BNEP filters: protocol multicast
[    4.676640] Bluetooth: BNEP socket layer initialized
[    5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[    5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[    5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[    5.619204] Bluetooth: hci0: AOSP quality report is supported
[    5.619301] Bluetooth: MGMT ver 1.23
[    6.741247] Bluetooth: RFCOMM TTY layer initialized
[    6.741258] Bluetooth: RFCOMM socket layer initialized
[    6.741261] Bluetooth: RFCOMM ver 1.11

lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter

USB information:
T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3584 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Liwei Sun <sunliweis@126.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5012b5ff92c8..9850272e83ef 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
-- 
2.49.0


             reply	other threads:[~2025-05-12  2:31 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-12  2:31 Liwei Sun [this message]
2025-05-12  3:00 ` Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922 bluez.test.bot
2025-05-12 21:37 ` [PATCH] " Luiz Augusto von Dentz
  -- strict thread matches above, loose matches on Subject: below --
2025-05-13  6:13 Liwei Sun
2025-05-15 17:10 ` patchwork-bot+bluetooth
2025-04-30 23:50 青叶 西城
2025-05-15 17:10 ` patchwork-bot+bluetooth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3fbcee73.2408.196c254dd8f.Coremail.sunliweis@126.com \
    --to=sunliweis@126.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox