Hi

here some more informations and the attached hci dump

/bin/bluepin:

#!/bin/bash
#sleep 1
echo "PIN:6bkgLuRqDpSIYZgP"

command:

magito:/etc/bluetooth# ciptool connect 00:04:0E:84:06:CA
Can't connect L2CAP socket: Connection refused

syslog:

Jan 21 12:01:30 magito hcid[4019]: HCI daemon ver 2.4 started
Jan 21 12:01:30 magito sdpd[4022]: sdpd v1.5 started
Jan 21 12:01:30 magito hcid[4019]: HCI dev 0 up
Jan 21 12:01:30 magito hcid[4019]: Starting security manager 0
Jan 21 12:01:42 magito hcid[4019]: pin_code_request 
(sba=00:04:0E:82:F9:74, dba=00:04:0E:84:06:CA)
Jan 21 12:01:42 magito hcid[4031]: hci_send_cmd 6bkgLuRqDpSIYZgP
Jan 21 12:01:42 magito hcid[4019]: pin_code_request 
(sba=00:04:0E:82:F9:74, dba=00:04:0E:84:06:CA)
Jan 21 12:01:42 magito hcid[4033]: hci_send_cmd 6bkgLuRqDpSIYZgP

best regards
Burkhard


Marcel Holtmann wrote:
> Hi Burkhard,
> 
> 
>>I am using BlueFRITZ! USB Bluetooth dongle, the BlueFRITZ
>>AP-ISDN and ciptool for establishing a connection.
>>
>>I want to replace the python script bluepin with a simple shell script 
>>to avoid interactive authentication. A simple echo should do this, 
>>however I found out that a connection is only established when the 
>>bluepin bash script doesn't answer immediately.
>>
>>Is there a reason for this behavior
> 
> 
> show us the dump (hcidump -w <file>) for a connection setup.
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>