From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <403F8EAC.40701@superbug.demon.co.uk> From: James Courtier-Dutton MIME-Version: 1.0 To: bluez-devel@lists.sourceforge.net Content-Type: text/plain; charset=us-ascii; format=flowed Subject: [Bluez-devel] Questions about correctness of hci_usb sco support. Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 27 Feb 2004 18:38:36 +0000 In hci_usb.c file, line 604 ish static inline int __recv_frame(struct hci_usb *husb, int type, void *data, int count) Contains: - case HCI_SCODATA_PKT: if (count >= HCI_SCO_HDR_SIZE) { struct hci_sco_hdr *h = data; len = HCI_SCO_HDR_SIZE + h->dlen; } else return -EILSEQ; break; With a SCO HCI packet, it lasts 3 air frames for a bluetooth headset. How do we know that the first frame we receive from the usb bluetooth device is the SCO HCI header? What happens if the first SCO HCI frame we receive is actually the second or third frame in the SCO HCI packet ? Surely some validation checks need to be done. For example, depending on the sample format we are using, we should already know what the SCO HCI length should be, so we could check this against the length in the SCO HCI header, and only accept the frame if they match, if they don't match, drop the frame, and wait for the next frame. I would expect similar problems with HCI int/bulk frames, but I don't actually see any corrupt int/bulk frames, so I was wondering whether the usb bluetooth dongle somehow ensures that the first air frame we receive is actually the start of an HCI frame. Maybe it is just luck, as int/bulk frames normally have a lot of blank invalid frames in between, so maybe as soon as it sees a valid frame, it is always the start of the int/bulk frame. I don't think we can make this assumtion all the time, in case we start filling the air entirely with bulk frames, and some air frames get lost. We will have to drop the hci frame, and then resync when the next hci frame arrives. With SCO HCI frames, there are never gaps between frames, so if we loose a single air frame, we would have to somehow resync to get back to the SCO HCI header frame. Can anyone help me understand this? Cheers James ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel