[Bluez-users] hcitool scan gives timeout on an ipaq 5500

linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [Bluez-users] hcitool scan gives timeout on an ipaq 5500
@ 2004-03-29 21:31 filipe abrantes
  0 siblings, 0 replies; 4+ messages in thread
From: filipe abrantes @ 2004-03-29 21:31 UTC (permalink / raw)
  To: bluez-users

hello list:

ive been using bluez on an ipaq, but im having some problems:

how i set up bt on ipaq:

# uname -r
2.4.19-rmk6-pxa1-hh36
# pand
PAN daemon version 1.1rc2
..
# hcitool
hcitool - HCI Tool ver 2.2
# hcid --version
hcid: invalid option -- -
hcid - HCI daemon ver 2.3

#hciattach /dev/tts/1 any 921600
# hciconfig
hci0:   Type: UART
       BD Address: 08:00:17:1F:C5:E4 ACL MTU: 339:4  SCO MTU: 60:9
       UP RUNNING PSCAN ISCAN
       RX bytes:88 acl:0 sco:0 events:11 errors:1
       TX bytes:652 acl:0 sco:0 commands:25 errors:0

... and the hcid.conf files are similar on both the ipaq and my pc



when i try hcitool scan on ipaq:

# hcitool scan
Scanning ...
Inquiry failed.: Connection timed out

when i try on my pc:

# hcitool scan
Scanning ...
       08:00:17:1F:C5:E4       ipaq

then when i put my pc on: pand --listen --role GN
...and try to connect: pand --connect 00:10:60:A4:89:15 (on the ipaq side)

it doesn t establish connection.

but on the other end if i try  to switch roles, the pc can connect to 
the ipaq  (the ipaq is now GN)  then it works out ok.


any ideas on whats happening?


thanks all


filipe



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [Bluez-users] hcitool scan gives timeout on an ipaq 5500
@ 2008-03-30 19:33 filipe abrantes
  2004-09-28 12:10 ` Marcel Holtmann
  0 siblings, 1 reply; 4+ messages in thread
From: filipe abrantes @ 2008-03-30 19:33 UTC (permalink / raw)
  To: bluez-users, filipe_abrantes

hello list:

ive been using bluez on an ipaq, but im having some problems:

how i set up bt on ipaq:

# uname -r
2.4.19-rmk6-pxa1-hh36
# pand
PAN daemon version 1.1rc2
..
# hcitool
hcitool - HCI Tool ver 2.2
# hcid --version
hcid: invalid option -- -
hcid - HCI daemon ver 2.3

#hciattach /dev/tts/1 any 921600
# hciconfig
hci0:   Type: UART
        BD Address: 08:00:17:1F:C5:E4 ACL MTU: 339:4  SCO MTU: 60:9
        UP RUNNING PSCAN ISCAN
        RX bytes:88 acl:0 sco:0 events:11 errors:1
        TX bytes:652 acl:0 sco:0 commands:25 errors:0

... and the hcid.conf files are similar on both the ipaq and my pc



when i try hcitool scan on ipaq:

# hcitool scan
Scanning ...
Inquiry failed.: Connection timed out

when i try on my pc:

# hcitool scan
Scanning ...
        08:00:17:1F:C5:E4       ipaq

then when i put my pc on: pand --listen --role GN
...and try to connect: pand --connect 00:10:60:A4:89:15 (on the ipaq side)

it doesn t establish connection.

but on the other end if i try  to switch roles, the pc can connect to 
the ipaq  (the ipaq is now GN)  then it works out ok.


any ideas on whats happening?


thanks all


filipe


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [Bluez-users] hcitool scan gives timeout on an ipaq 5500
  2008-03-30 19:33 filipe abrantes
@ 2004-09-28 12:10 ` Marcel Holtmann
       [not found]   ` <415AF591.2040706@inescporto.pt>
  0 siblings, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2004-09-28 12:10 UTC (permalink / raw)
  To: filipe abrantes; +Cc: bluez-users, filipe_abrantes

Hi Filipe,

> ive been using bluez on an ipaq, but im having some problems:
> 
> how i set up bt on ipaq:
> 
> # uname -r
> 2.4.19-rmk6-pxa1-hh36
> # pand
> PAN daemon version 1.1rc2
> ..
> # hcitool
> hcitool - HCI Tool ver 2.2
> # hcid --version
> hcid: invalid option -- -
> hcid - HCI daemon ver 2.3
> 
> #hciattach /dev/tts/1 any 921600
> # hciconfig
> hci0:   Type: UART
>         BD Address: 08:00:17:1F:C5:E4 ACL MTU: 339:4  SCO MTU: 60:9
>         UP RUNNING PSCAN ISCAN
>         RX bytes:88 acl:0 sco:0 events:11 errors:1
>         TX bytes:652 acl:0 sco:0 commands:25 errors:0
> 
> ... and the hcid.conf files are similar on both the ipaq and my pc
> 
> 
> 
> when i try hcitool scan on ipaq:
> 
> # hcitool scan
> Scanning ...
> Inquiry failed.: Connection timed out
> 
> when i try on my pc:
> 
> # hcitool scan
> Scanning ...
>         08:00:17:1F:C5:E4       ipaq
> 
> then when i put my pc on: pand --listen --role GN
> ...and try to connect: pand --connect 00:10:60:A4:89:15 (on the ipaq side)
> 
> it doesn t establish connection.
> 
> but on the other end if i try  to switch roles, the pc can connect to 
> the ipaq  (the ipaq is now GN)  then it works out ok.

run hcidump -x as root on the iPAQ side to see what is going on.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 4+ messages in thread

[parent not found: <415AF591.2040706@inescporto.pt>]

* Re: [Bluez-users] hcitool scan gives timeout on an ipaq 5500
       [not found]   ` <415AF591.2040706@inescporto.pt>
@ 2004-09-29 22:27     ` Marcel Holtmann
  0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2004-09-29 22:27 UTC (permalink / raw)
  To: Filipe Abrantes; +Cc: BlueZ Mailing List

Hi Filipe,

> #hcidump -x
> HCIDump - HCI packet analyzer ver 1.5
> device: hci0 snap_len: 1028 filter: 0xffffffff
> 
>   (#hcitool scan - (gives timeout) )
> 
> < HCI Command: Inquiry(0x01|0x0001) plen 5 
> 
>    33 8B 9E 08 0A
> 
>   (#hciconfig -a  - (also gives timeout)
> 
> < HCI Command: Read Local Name(0x03|0x0014) plen 0
> 
> 
> this is too cryptic for me, hope it helps you solving the problem, let 
> me know if you find something.

maybe the Bluetooth support for the iPAQ 5xxx is broken. They use some
weird Bluetooth chip and maybe you need some other settings for
hciattach, but I don't really not what are the best.

Regards

Marcel




-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2008-03-30 19:33 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-29 21:31 [Bluez-users] hcitool scan gives timeout on an ipaq 5500 filipe abrantes
  -- strict thread matches above, loose matches on Subject: below --
2008-03-30 19:33 filipe abrantes
2004-09-28 12:10 ` Marcel Holtmann
     [not found]   ` <415AF591.2040706@inescporto.pt>
2004-09-29 22:27     ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).