[Bluez-users] NAP problem

[Jose Angel Rodriguez <jrodriguezv@telefonica.net>]

Hi all!!

I hava a Debian Sarge PC as a NAP for a bluetooth network. The computer 
is also connected to an ADSL.

This is my etc/network/interfaces file:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# The first network card - this entry was created during the Debian 
installation# (network, broadcast and gateway are optional)
auto eth0
iface eth0 inet static
       address 192.168.0.2
       netmask 255.255.255.0
       network 192.168.0.0
       broadcast 192.168.0.255
       gateway 192.168.0.1

# bluetooth network server
iface bnep0 inet static
       address 10.0.0.1
       netmask 255.255.255.0

eth0 is the ADSL connection an bnep0 is the bluetooth connection.

My /etc/bluetooth/pan/dev-up file:
#!/bin/sh
ifup bnep0

I think everytime a client connects it runs /etc/bluetooth/pan/dev-up. 
Everything was working fine, but after updating packages with apt-get 
everytime a client connects I have to configure bnep0 interface by hand 
(ifup bnep0).

¿Does anybody know why /etc/bluetooth/pan/dev-up does not work now? ¿How 
can I configure bnep0 interface automaticaly?

Thanks in advance!!

JOSE


-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver
higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users