Re: [Bluez-users] Epox Barton keyboard: HID create error 53

Matthias Thomae
2004-06-15T06:26:48Z

Hi Marcel,

Marcel Holtmann wrote:
>>I am trying to connect a Epox Barton Keyboard to a Thinkpad R50 with
>>internal bluetooth, Kernel 2.6.6-mh3 and debian bluez-utils 2.7-2.
>>
>>But I get:
>> > hidd --connect 00:04:61:XX:XX:XX
>>HID create error 53 (Invalid request descriptor)
>>
>>syslog says:
>>Jun 14 19:24:11 tyron hidd: New HID device 00:04:61:XX:XX:XX (Epox
>>HIDEngine Keyboard)
>>
>>Tried with and without encryption, both failed. Any ideas?
>
>
> this is not an encryption problem. The HID parser can't interpret the
> HID report descriptor. I've seen the same problem with the new HID
> version of the presenter and actually I don't know why this happens. Do
> the mouse works?

Yes, the mouse works perfectly.
The keyboard does work with WinXP.

>> > hciconfig -a
>>hci0: Type: USB
>> BD Address: 00:20:E0:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8
>> UP RUNNING PSCAN
>> RX bytes:2756580 acl:10594 sco:0 events:3821 errors:0
>> TX bytes:443471 acl:4191 sco:0 commands:110 errors:0
>> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
>> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>> Link policy: RSWITCH HOLD SNIFF PARK
>> Link mode: SLAVE ACCEPT
>> Name: 'BlueTyron'
>> Class: 0x000100
>> Service Classes: Unspecified
>> Device Class: Computer, Uncategorized
>> HCI Ver: 1.1 (0x1) HCI Rev: 0x222 LMP Ver: 1.1 (0x1) LMP Subver: 0x222
>> Manufacturer: Cambridge Silicon Radio (10)
>
>
> What kind of dongle is this?

This is the built-in bluetooth of the IBM Thinkpad R50, Model Number
1829-7RG.

>> > hcitool info 00:04:61:XX:XX:XX
>>Requesting information ...
>> BD Address: 00:04:61:XX:XX:XX
>> Device Name: Bluetooth-Keyboard 817324
>> LMP Version: 1.1 (0x1) LMP Subversion: 0x356
>> Manufacturer: Cambridge Silicon Radio (10)
>> Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
>> <3-slot packets> <5-slot packets> <encryption> <slot offset>
>> <timing accuracy> <role switch> <hold mode> <sniff mode>
>> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
>> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
>> <transparent SCO>
>
>
> Mine is much older, when do you bought it?

I bought it about 3 weeks ago, from www.bauers.com

Regards.
Matthias