From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <40D6E1B6.90700@identisys.de> From: Thomas Eller MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Content-Type: text/plain; charset=us-ascii; format=flowed Subject: [Bluez-users] Rfcomm connection with multiple usb dongles Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 21 Jun 2004 15:25:10 +0200 Hello ! I have two USB dongles connected to my system: hciconfig hci0: Type: USB BD Address: 00:02:72:B1:6E:28 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:6901 acl:92 sco:0 events:655 errors:0 TX bytes:6146 acl:147 sco:0 commands:302 errors:0 hci1: Type: USB BD Address: 00:02:72:B1:6E:29 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:147 acl:0 sco:0 events:21 errors:0 TX bytes:328 acl:0 sco:0 commands:20 errors:0 -------------- I try the rfcomm-command: rfcomm connect 0 xx:xx:xx:xx:xx:xx 1 This connection is made over hci0 on channel 1, activating the device rfcomm0. How can i tell rfcomm to make a connection over hci1 ?? Thanks, Thomas -- --------------------------- Thomas Eller Identisys GmbH Moselstr.8 35260 Stadtallendorf Phone: +49 (0)6428-442180 FAX: +49 (0)6428-442348 ------------------------------------------------------- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users