From: "Rolf E. Thorup" <rolft@daimi.au.dk>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] SDP problems on embedded device
Date: Wed, 21 Jul 2004 14:30:42 +0200 [thread overview]
Message-ID: <40FE61F2.3080407@daimi.au.dk> (raw)
In-Reply-To: <1090412310.21683.87.camel@pegasus>
Hi Marcel
>>The other dongle I have available has HCI 16.4 firmware. If it is of any
>>help here's the output from "hcidump -x -t" from the laptop (browsing
>>the Cerfcube using the HCI 16.4 firmware dongle). I'm still using the
>>mh14 kernel patch.
>
> and it is still the same problem. One side sends the config request, but
> the other don't receives it. Try to browse from the Cerfcube a service
> on your laptop's SDP database.
Cerfcube searching for SP on laptop.
[root@xscale3 /root]# sdptool search --bdaddr 00:0A:94:00:20:2A SP
Searching for SP on 00:0A:94:00:20:2A ...
Service Search failed: Connection timed out
[root@xscale3 /root]# hcidump -x -t
HCIDump - HCI packet analyzer ver 1.9
device: hci0 snap_len: 1028 filter: 0xffffffff
1090413342.564243 < HCI Command: Create Connection (0x01|0x0005) plen 13
2A 20 00 94 0A 00 18 CC 02 00 00 00 01
1090413342.574362 > HCI Event: Command Status (0x0f) plen 4
00 01 05 04
1090413345.877738 > HCI Event: Connect Complete (0x03) plen 11
00 29 00 2A 20 00 94 0A 00 01 00
1090413345.878922 < ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
1090413345.879079 < HCI Command: Write Link Policy Settings
(0x02|0x000d) plen 4
29 00 0F 00
1090413345.885720 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090413345.889737 > HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
1090413345.897742 > HCI Event: Page Scan Repetition Mode Change (0x20)
plen 7
2A 20 00 94 0A 00 01
1090413345.905741 > HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
1090413345.944735 > ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
1090413345.945942 < ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
1090413345.953719 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090413345.973735 > ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
1090413345.975736 > ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
1090413345.975970 < ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
1090413345.977202 < ACL data: handle 0x0029 flags 0x02 dlen 24
L2CAP(d): cid 0x40 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1101 (SP)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
1090413345.983741 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090413365.970806 < ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
1090413365.987893 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090413366.010892 > ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
1090413368.008993 < HCI Command: Disconnect (0x01|0x0006) plen 3
29 00 13
1090413368.015481 > HCI Event: Command Status (0x0f) plen 4
00 01 06 04
1090413368.039499 > HCI Event: Disconn Complete (0x05) plen 4
00 29 00 16
Laptop's hcidump:
[root@tux012 root]# hcidump -x -t
HCIDump - HCI packet analyzer ver 1.9
device: hci0 snap_len: 1028 filter: 0xffffffff
1090412930.648961 > HCI Event: Connect Request (0x04) plen 10
74 05 B1 76 0C 00 00 01 00 01
1090412930.657137 < HCI Command: Accept Connection Request (0x01|0x0009)
plen 7
74 05 B1 76 0C 00 01
1090412930.670802 > HCI Event: Command Status (0x0f) plen 4
00 01 09 04
1090412930.688229 > HCI Event: Connect Complete (0x03) plen 11
00 29 00 74 05 B1 76 0C 00 01 00
1090412930.688562 < HCI Command: Write Link Policy Settings
(0x02|0x000d) plen 4
29 00 0F 00
1090412930.689859 > HCI Event: Page Scan Repetition Mode Change (0x20)
plen 7
74 05 B1 76 0C 00 01
1090412930.714781 > HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
1090412930.715032 < HCI Command: Change Connection Packet Type
(0x01|0x000f) plen 4
29 00 18 CC
1090412930.732785 > HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
1090412930.733440 > HCI Event: Command Status (0x0f) plen 4
00 01 0F 04
1090412930.737560 > HCI Event: Connection Packet Type Changed (0x1d) plen 5
00 29 00 18 CC
1090412930.757320 > ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
1090412930.757744 < ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
1090412930.769604 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090412930.776498 > ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
1090412930.776791 < ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
1090412930.776816 < ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
1090412930.800513 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090412930.802459 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090412930.806407 > ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
1090412950.810971 > ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
1090412950.811536 < ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
1090412950.857907 > HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
1090412952.930571 > HCI Event: Disconn Complete (0x05) plen 4
00 29 00 13
I'm going away for an extended weekend right now, so I won't be back to
continue this thread until Monday next week.
Regards
Rolf
next prev parent reply other threads:[~2004-07-21 12:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-19 19:38 [Bluez-users] SDP problems on embedded device Rolf E. Thorup
2004-07-19 20:53 ` Marcel Holtmann
2004-07-20 10:31 ` Rolf E. Thorup
2004-07-20 14:47 ` Marcel Holtmann
2004-07-20 17:10 ` Rolf E. Thorup
2004-07-20 17:43 ` Marcel Holtmann
2004-07-21 9:43 ` Rolf E. Thorup
2004-07-21 10:04 ` Marcel Holtmann
2004-07-21 10:56 ` Rolf E. Thorup
2004-07-21 12:18 ` Marcel Holtmann
2004-07-21 12:30 ` Rolf E. Thorup [this message]
2004-07-28 14:05 ` Rolf E. Thorup
2004-07-28 18:57 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40FE61F2.3080407@daimi.au.dk \
--to=rolft@daimi.au.dk \
--cc=bluez-users@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox