From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <4115b3ef.johana@johana.com> From: "Tom Watson" To: bluez-users@lists.sourceforge.net Subject: [Bluez-users] IOGear GBU301 and Kernel 2.4.20 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 07 Aug 2004 22:02:38 -0800 Well... I have attempted to get all the modules functional, but appear to have a problem. Somehow the driver hci_usb doesn't get connected to the USB device. I print out the USB driver info (/proc/bus/usb/devices) and get ...Cls=e0(Unk. )... where is should get 'hci_usb' as I see it. Any other reference to 'hci0' (as in 'hciconfig hco0 up') fails since it can't find the device. Is there something in the hotplug configuration that I'm missing, or something even more obvious (but not to me!). Any help is nice. Ask a question, and I should be able to answer what I've done. Thanks.... -- Tom Watson Generic short signature tsw@johana.com (I'm at home now) ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users