Marcel et al,
I have taken Marcels advice and moved to SUSE 9.2 after trying
Debian on the way. I could not get Debian to work with SATA and so it
was a non starter for this system. SUSE works a treat with SATA,
wireless LAN card and everything but my bluetooth print server. I
cannot find any services for this device, my phone shows up fine as
does a windows bluetooth enabled machine. I have included results from
some commands, please let me know if there are any others I should
run. Any help would be greatly appreciated as I have very little hair
left.
admin@Gimli:~> hcitool inq
Inquiring ...
00:0F:DE:1C:2A:59 clock offset: 0x2893 class:
0x520204
00:09:DD:10:39:03 clock offset: 0x7eae class:
0x020104
00:02:72:40:80:A3 clock offset: 0x2151 class:
0x040680
admin@Gimli:~> hcitool inq
Scanning ...
00:0F:DE:1C:2A:59 dave
00:09:DD:10:39:03 DRAGON
00:02:72:40:80:A3 BELKIN_PRT_4080A3
admin@Gimli:~> hcitool info 00:02:72:40:80:A3
Requesting information ...
BD Address: 00:02:72:40:80:A3
Device Name: BELKIN_PRT_4080A3
LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets>
<encryption> <slot offset>
<timing accuracy> <role switch> <hold mode>
<sniff mode>
<park state> <RSSI> <channel quality> <SCO
link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log>
<CVSD> <paging scheme>
<power control> <transparent SCO>
admin@Gimli:~> hcidump -x
HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
A3 80 40 72 02 00 18 CC 02 00 00 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 05 04
> HCI Event: Connect Complete (0x03) plen 11
00 29 00 A3 80 40 72 02 00 01 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
A3 80 40 72 02 00 01
> HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0051 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0051 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0051 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 26
L2CAP(d): cid 0x0051 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x1002 (PubBrwsGrp)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 15
L2CAP(d): cid 0x0040 len 11 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x6
cnt 0x3
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0051 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0051 scid 0x0040
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0052 scid 0x0041 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0052 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0052 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 26
L2CAP(d): cid 0x0052 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x0100 (L2CAP)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 17
L2CAP(d): cid 0x0041 len 13 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x8
cnt 0x3
cont 02 00 00
..... (etc etc etc) ....
Dave Givens