Marcel,
    Sorry for the stupid question, here are the results you asked for.

sdptest............
Sequence
    Attribute 0x0000 - Service record handle
        UINT32 0x00010000
    Attribute 0x0001 - Service class ID list
        Sequence
            UUID32 0x00001101
    Attribute 0x0004 - Protocol descriptor list
        Sequence
            Sequence
                UUID32 0x00000100
            Sequence
                UUID32 0x00000003
                UINT8 0x03
    Attribute 0x0100
        String Virtual [USB Printer]
Sequence
    Attribute 0x0000 - Service record handle
        UINT32 0x00010001
    Attribute 0x0001 - Service class ID list
        Sequence
            UUID16 0x1126 - HCR Print
    Attribute 0x0004 - Protocol descriptor list
        Sequence
            Sequence
                UUID16 0x0100 - L2CAP
                UINT16 0x1013
            Sequence
                UUID16 0x0012 - Hardcopy Control Channel
    Attribute 0x000d - Additional protocol descriptor lists
        Sequence
            Sequence
                Sequence
                    UUID16 0x0100 - L2CAP
                    UINT16 0x1011
                Sequence
                    UUID16 0x0014 - Hardcopy Data Channel
    Attribute 0x0100
        String Hardcopy Cable Replacement
    Attribute 0x0300
        String 00 38 4d 46 47 3a 53 74 61 72 3b 43 4d 44 3a 53 54 41 52 
3b 4d 44 4c 3a 54 53 50 37 30 30 20 28 53 54 52 5f 54 2d 55 30 30 31 29 
3b 43 4c 53 3a 50 52 49 4e 54 45 52 3b
    Attribute 0x0302
        String TSP700 (STR_T-U001)
    Attribute 0x0304
        String TSP700 (STR_T-U001)

hcitool .......
Requesting information ...
    BD Address:  00:02:72:40:80:A3
    Device Name: BELKIN_PRT_4080A3
    LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
    Manufacturer: Cambridge Silicon Radio (10)
    Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        <3-slot packets> <5-slot packets> <encryption> <slot offset>
        <timing accuracy> <role switch> <hold mode> <sniff mode>
        <park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
        <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
        <power control> <transparent SCO>

Thanks
Dave Givens


Dave Givens wrote:

> Marcel,
>     When I try to run the ./bootstrap command it comes back saying I 
> need configure.ac or configure.in. Which should I use?
>
> Dave Givens
>
> Marcel Holtmann wrote:
>
>>Hi Dave,
>>
>>  
>>
>>>    I am trying to get it to work with a Star TSP700 Thermal printer,
>>>but I have also tried with an HP970CXI and a Canon i865.
>>>    
>>>
>>
>>please checkout the BlueZ libs2 CVS repository and run:
>>
>>	./bootstrap && ./configure && make
>>	./test/sdptest records 00:00:... > file.txt
>>
>>And then send me that file.txt and also the output of "hcitool info".
>>
>>Regards
>>
>>Marcel
>>
>>
>>
>>
>>-------------------------------------------------------
>>SF email is sponsored by - The IT Product Guide
>>Read honest & candid reviews on hundreds of IT Products from real users.
>>Discover which products truly live up to the hype. Start reading now. 
>>http://productguide.itmanagersjournal.com/
>>_______________________________________________
>>Bluez-users mailing list
>>Bluez-users@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>>  
>>