From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <41A9FD76.9070706@xmission.com> From: Brad Midgley MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] State of snd-bt-sco References: <200411281307.43051.carlosarazevedo@netcabo.pt> In-Reply-To: <200411281307.43051.carlosarazevedo@netcabo.pt> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 28 Nov 2004 09:31:50 -0700 Carlos > Is snd-bt-sco (from the CVS) currently working ? I can get btsco (the app) to > connect to the headset > (http://sourceforge.net/mailarchive/forum.php?thread_id=6030842&forum_id=1883) I have not tested it since the module was made standalone. No one has reported using it with your plantronics m2500 headset. Do you have a different adapter (like a CSR-based usb) you could try it with by the way? > and get the following : > > Device is 1:0 > Voice setting: 0x0060 > RFCOMM channel 1 connected > recieved AT+CKPD=200 > opened hwdep > connected SCO channel > Setting sco fd > Done setting sco fd > recieved AT+VGS=04 > Sending up speaker change 4 looks good > but when I run aplay (aplay -D hw:1 prompt-copia1.wav) or arecord it exits > with > > Playing WAVE 'prompt-copia1.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, > Mono > aplay: pcm_write:1118: write error: Input/output error does it exit immediately or after a timeout? if you're using gnome, be sure to "esdctl off" so you're not competing with esound. i had to get everything just perfect with alsa before it would work. what does the also stuff in modules.conf look like? mine is: options snd major=116 cards_limit=2 device_mode=0660 device_gid=29 device_uid=0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss alias snd-card-0 snd_intel8x0 alias snd-card-1 snd_bt_sco #alias snd-card-2 snd-share #alias snd-card-3 snd-virmidi alias sound-slot-0 snd-card-0 alias sound-slot-1 snd-card-1 alias sound-slot-2 snd-card-2 alias sound-slot-3 snd-card-3 also i found my "alsasound" script under debian was not set up to start at boot. > By the way both in btsco and in the driver there's some structs and other > variables declared inside the code (not at the top of the function). GCC > 2.95.x doesn't like it, so it would be nice if they were moved upstream. give us line numbers or a patch please. brad ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users