Re: [Bluez-devel] hello

Simon Vogl
2004-11-29T12:51:55Z

well there is one tool:
get the csr reset utility, it contains source code to also alter the hci=20
mapping (which I used on my vaio):
http://www.soft.uni-linz.ac.at/_wiki/tiki-index.php?page=3DProjectBluezHa=
ndsfree
no guarantees given, no questions asked ;)
simon

Marcel Holtmann wrote:

>Hi Nick,
>
> =20
>
>>| check with "hciconfig hci0 revision" (as root) for the setting of
>>| the SCO routing. I think it is set to PCM.
>>
>>you were right:
>>
>>(0:1)root@Muramasa:~$ hciconfig hci0 revision
>>hci0: Type: USB
>>~ BD Address: 00:60:57:02:95:FE ACL MTU: 192:8 SCO MTU: 64:8
>>~ HCI 12.7
>>~ Chip version: BlueCore01b
>>~ SCO mapping: PCM
>>
>>so, is that the way it should be?
>> =20
>>
>
>to use your dongle with a headset it must be set to HCI. This value is
>stored in the PS keys and it is changeable, but there exists no free
>tool for this job.
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now.=20
>http://productguide.itmanagersjournal.com/
>_______________________________________________
>Bluez-devel mailing list
>Bluez-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-devel
> =20
>

--=20
_______________________________________________________________________
Dr. Simon Vogl
Institut f=FCr Pervasive Computing, Johannes Kepler Universit=E4t Linz =20
Altenberger Stra=DFe 69, A-4040 Linz, Austria =20
=20
Tel: +43 732 2468-8517, Fax: +43 732 2468-8426 =20
mailto: vogl@soft.uni-linz.ac.at, http://www.soft.uni-linz.ac.at/