From: Lars Grunewaldt <lgw@dark-reality.de>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] bluetooth headset - connects but no audio
Date: Wed, 19 Jan 2005 13:22:42 +0100 [thread overview]
Message-ID: <41EE5112.1040502@dark-reality.de> (raw)
In-Reply-To: <41EE3974.1010604@fastwebnet.it>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I own a HBH-35 myself and it works very well...
Do you have another dongle available to test this? I use an epox bt-dg03.
What kernel version do you use? Make sure it's 2.6.10 and you have the
- -mh1 patches added.
you might also want to try to fire up alsamixer [-c1] and enable the
"loopback" so that you can/should hear yourself (simply fires back the
audio to the headset directly).
best regards,
~ Lars
WiseLYNX wrote:
| hi everybody,
|
| it's some time I'm trying to get my BT headset to work with btsco, but
| with no results.
|
| the problem, which I found reported but not answered in a forum on the
| bluetooth-alsa sourceforge project page
|
(https://sourceforge.net/tracker/?func=3Ddetail&atid=3D678259&aid=3D10679=
46&group_id=3D116589),
|
| is I can connect to the headset (see log above), set volume from pc, se=
e
| events, and even hear a hissing sound, but I can't hear any sound using
| aplay, nor record anything; the programs just hang.
|
| I hope this issue is not an already well known and solved; if so it is,
| please redirect me to where the info I need are, thanks.
|
| Else, here are some logs as suggested to report; I omitted the output o=
f
| `hcidump -x` because it is very long, but I can of course provide it if
| necessary.
|
| thanks in advance for helping me.
|
| BT dongle: Trust BT180 (USB, works fine with other devices, like my T39
| phone)
| BT headset: Ericsson HBH-35 (works fine as phone headset)
|
| # hciconfig -a
| hci0: Type: USB
| ~ BD Address: 00:0B:0D:40:6F:B9 ACL MTU: 120:20 SCO MTU: 64:0
| ~ UP RUNNING PSCAN ISCAN AUTH
| ~ RX bytes:95 acl:0 sco:0 events:12 errors:0
| ~ TX bytes:296 acl:0 sco:0 commands:12 errors:0
| ~ Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
| ~ Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
| ~ Link policy: RSWITCH HOLD SNIFF PARK
| ~ Link mode: SLAVE ACCEPT
| ~ Name: 'Naima blue 0'
| ~ Class: 0x000100
| ~ Service Classes: Unspecified
| ~ Device Class: Computer, Uncategorized
| ~ HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver:
| 0x757
| ~ Manufacturer: Silicon Wave (11)
|
| # hciconfig hci0
| hci0: Type: USB
| ~ BD Address: 00:0B:0D:40:6F:B9 ACL MTU: 120:20 SCO MTU: 64:0
| ~ UP RUNNING PSCAN ISCAN AUTH
| ~ RX bytes:372 acl:0 sco:0 events:15 errors:0
| ~ TX bytes:305 acl:0 sco:0 commands:15 errors:0
|
| # hcitool info 00:0E:07:4E:4B:3E
| Requesting information ...
| ~ BD Address: 00:0E:07:4E:4B:3E
| ~ Device Name: HBH-35
| ~ LMP Version: 1.1 (0x1) LMP Subversion: 0x8d40
| ~ Manufacturer: Ericsson Technology Licensing (0)
| ~ Features: 0xbc 0x28 0x01 0x00 0x00 0x00 0x00 0x00
| ~ <encryption> <slot offset> <timing accuracy> <role
switch>
| ~ <sniff mode> <SCO link> <HV3 packets> <CVSD>
|
| # btsco 00:0E:07:4E:4B:3E
| Device is 1:0
| Voice setting: 0x0060
| RFCOMM channel 1 connected
| recieved AT*ECBP=3D?
| recieved AT+CLIP=3D1
| recieved AT+CSCS=3D"UTF-8"
| recieved AT+CLAN?
| recieved AT+CKPD=3D200
| opened hwdep
| connected SCO channel
| Setting sco fd
| Done setting sco fd
| recieved AT+VGS=3D15
| Sending up speaker change 15
|
|
| --
|
| =B0=B0=B0 Wise
| ~ O LYNX
|
| GPG key: http://wiselynx.interfree.it/wiselynx.naima.asc
| MD5 checksum: http://wiselynx.interfree.it/wiselynx.naima.asc.md5
|
| -----BEGIN GEEK CODE BLOCK-----
| Version: 3.1
| GE>$/IT/S d+ s: !a>? C++(+++)>$ U P>+ L++>++++ E--- W++ N ?o ?K w-- ?O =
?M
| ?V>+ PS+ !PE Y+ PGP+ t- ?5 X- R+(*) tv- b+(++)>+++ DI(++) !D G e++ h!*@
| r%>++ y-->+
| ------END GEEK CODE BLOCK------
|
- -------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
- --
Lars Grunewaldt
* software development
* multimedia design
skills: C/C++/Java/PHP/(X)HTML/Flash/audio/video
web: http://www.dark-reality.de
mail: lgw@dark-reality.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFB7lERQWC6DTWkDAoRAv9aAKCoWSoThaj39UHBd1EQPX2kmlUTlwCgr9ge
vTg9Bt2mBOhUH+6F7bFAsCw=3D
=3DLOYb
-----END PGP SIGNATURE-----
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2005-01-19 12:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-19 10:41 [Bluez-devel] bluetooth headset - connects but no audio WiseLYNX
2005-01-19 12:22 ` Lars Grunewaldt [this message]
2005-01-19 11:55 ` WiseLYNX
2005-01-19 13:54 ` Lars Grunewaldt
2005-01-19 13:27 ` WiseLYNX
2005-01-19 15:26 ` Lars Grunewaldt
2005-01-19 14:08 ` WiseLYNX
2005-01-19 17:27 ` Lars Grunewaldt
2005-01-19 21:52 ` WiseLYNX
2005-01-20 1:40 ` Lars Grunewaldt
2005-01-20 10:23 ` WiseLYNX
2005-01-20 13:12 ` Lars Grunewaldt
2005-01-26 7:46 ` WiseLYNX
2005-01-26 11:41 ` Lars Grunewaldt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41EE5112.1040502@dark-reality.de \
--to=lgw@dark-reality.de \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox