Re: [Bluez-devel] bluetooth headset - connects but no audio

Lars Grunewaldt
2005-01-19T12:22:42Z

I own a HBH-35 myself and it works very well...

Do you have another dongle available to test this? I use an epox bt-dg03.

What kernel version do you use? Make sure it's 2.6.10 and you have the
- -mh1 patches added.

you might also want to try to fire up alsamixer [-c1] and enable the
"loopback" so that you can/should hear yourself (simply fires back the
audio to the headset directly).

best regards,
~ Lars

WiseLYNX wrote:
| hi everybody,
|
| it's some time I'm trying to get my BT headset to work with btsco, but
| with no results.
|
| the problem, which I found reported but not answered in a forum on the
| bluetooth-alsa sourceforge project page
|
(https://sourceforge.net/tracker/?func=3Ddetail&atid=3D678259&aid=3D10679=
46&group_id=3D116589),

|
| is I can connect to the headset (see log above), set volume from pc, se=
e
| events, and even hear a hissing sound, but I can't hear any sound using
| aplay, nor record anything; the programs just hang.
|
| I hope this issue is not an already well known and solved; if so it is,
| please redirect me to where the info I need are, thanks.
|
| Else, here are some logs as suggested to report; I omitted the output o=
f
| `hcidump -x` because it is very long, but I can of course provide it if
| necessary.
|
| thanks in advance for helping me.
|
| BT dongle: Trust BT180 (USB, works fine with other devices, like my T39
| phone)
| BT headset: Ericsson HBH-35 (works fine as phone headset)
|
| # hciconfig -a
| hci0: Type: USB
| ~ BD Address: 00:0B:0D:40:6F:B9 ACL MTU: 120:20 SCO MTU: 64:0
| ~ UP RUNNING PSCAN ISCAN AUTH
| ~ RX bytes:95 acl:0 sco:0 events:12 errors:0
| ~ TX bytes:296 acl:0 sco:0 commands:12 errors:0
| ~ Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
| ~ Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
| ~ Link policy: RSWITCH HOLD SNIFF PARK
| ~ Link mode: SLAVE ACCEPT
| ~ Name: 'Naima blue 0'
| ~ Class: 0x000100
| ~ Service Classes: Unspecified
| ~ Device Class: Computer, Uncategorized
| ~ HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver:
| 0x757
| ~ Manufacturer: Silicon Wave (11)
|
| # hciconfig hci0
| hci0: Type: USB
| ~ BD Address: 00:0B:0D:40:6F:B9 ACL MTU: 120:20 SCO MTU: 64:0
| ~ UP RUNNING PSCAN ISCAN AUTH
| ~ RX bytes:372 acl:0 sco:0 events:15 errors:0
| ~ TX bytes:305 acl:0 sco:0 commands:15 errors:0
|
| # hcitool info 00:0E:07:4E:4B:3E
| Requesting information ...
| ~ BD Address: 00:0E:07:4E:4B:3E
| ~ Device Name: HBH-35
| ~ LMP Version: 1.1 (0x1) LMP Subversion: 0x8d40
| ~ Manufacturer: Ericsson Technology Licensing (0)
| ~ Features: 0xbc 0x28 0x01 0x00 0x00 0x00 0x00 0x00
| ~ <encryption> <slot offset> <timing accuracy> <role
switch>
| ~ <sniff mode> <SCO link> <HV3 packets> <CVSD>
|
| # btsco 00:0E:07:4E:4B:3E
| Device is 1:0
| Voice setting: 0x0060
| RFCOMM channel 1 connected
| recieved AT*ECBP=3D?
| recieved AT+CLIP=3D1
| recieved AT+CSCS=3D"UTF-8"
| recieved AT+CLAN?
| recieved AT+CKPD=3D200
| opened hwdep
| connected SCO channel
| Setting sco fd
| Done setting sco fd
| recieved AT+VGS=3D15
| Sending up speaker change 15
|
|
| --
|
| =B0=B0=B0 Wise
| ~ O LYNX
|
| GPG key: http://wiselynx.interfree.it/wiselynx.naima.asc
| MD5 checksum: http://wiselynx.interfree.it/wiselynx.naima.asc.md5
|
| -----BEGIN GEEK CODE BLOCK-----
| Version: 3.1
| GE>$/IT/S d+ s: !a>? C++(+++)>$ U P>+ L++>++++ E--- W++ N ?o ?K w-- ?O =
?M
| ?V>+ PS+ !PE Y+ PGP+ t- ?5 X- R+(*) tv- b+(++)>+++ DI(++) !D G e++ h!*@
| r%>++ y-->+
| ------END GEEK CODE BLOCK------
|

- -------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

- --
Lars Grunewaldt
* software development
* multimedia design
skills: C/C++/Java/PHP/(X)HTML/Flash/audio/video
web: http://www.dark-reality.de
mail: lgw@dark-reality.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFB7lERQWC6DTWkDAoRAv9aAKCoWSoThaj39UHBd1EQPX2kmlUTlwCgr9ge
vTg9Bt2mBOhUH+6F7bFAsCw=3D
=3DLOYb