From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <42294598.6010004@adamis.de> From: Mathias Adam MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Once again: Socket CF card and Kernel 2.6 References: <20050226031901.GL11723@adamis.de> <1109578431.17256.9.camel@pegasus> <20050228220209.GA8151@adamis.de> <1109665776.17256.122.camel@pegasus> In-Reply-To: <1109665776.17256.122.camel@pegasus> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 05 Mar 2005 06:37:28 +0100 Hi, I just got it working by doing a little change in the serial driver (8250.c). I tested it with 2.6.11 but I think it could work for any 2.6 kernel. Marcel Holtmann schrieb: > I am not an serial card expert. This is a problem in the serial > subsystem and a BlueZ problem. That proved to be true. Marcel: One thing I discovered while debugging this: the hci_uart driver seems to initialize the actual UART with only 230400 baud. Is this really the case or are those UARTs clocked at nonstandard (higher) frequencies so that this setting does result in a higher real baud rate? Regards, Mathias ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users