Begin forwarded message: > From: Gary Albelli > Date: April 3, 2005 12:15:14 PM EDT > To: Gary Albelli > Cc: bluez-users@lists.sourceforge.net > Subject: Problem connecting to NAP via serial null modem connection > > I have tried to connect from both by laptop and my Palm-pilot. Each > device generates the same log information on the Linux box(NAP). I am > not sure where this is failing or what too do next. Any suggestions on > what I can check or do to diagnose the problem would be greatly > appreciated. > > I have included the dmesg output, log output generated from making the > connection, and my hcid.conf file. > > Thanks > Gary > > ===================== tailed from /var/log/messages ================== > > Apr 3 11:53:46 darthvader pppd[14136]: pppd 2.4.2 started by root, > uid 0 > Apr 3 11:53:46 darthvader pppd[14136]: Serial connection established. > Apr 3 11:53:46 darthvader pppd[14136]: Using interface ppp0 > Apr 3 11:53:46 darthvader pppd[14136]: Connect: ppp0 <--> /dev/rfcomm0 > Apr 3 11:53:46 darthvader dund[14122]: New connection from > 00:07:E0:34:9B:13 > Apr 3 11:53:51 darthvader pam_timestamp_check: pam_timestamp: `/' > owner UID != 0 > > > > > ====================== DMESG OUTPUT ========================== > > [root@darthvader ~]# dmesg > Linux version 2.6.8-1.541 (bhcompile@porky.build.redhat.com) (gcc > version 3.4.1 20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT > 2004 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ff77000 (usable) > BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) > BIOS-e820: 000000003ff79000 - 0000000040000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 1023MB LOWMEM available. > zapping low mappings. > On node 0 totalpages: 262007 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 257911 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 > DMI 2.3 present. > ACPI: RSDP (v000 DELL ) @ > 0x000fd550 > ACPI: RSDT (v001 DELL 8200 0x00000008 ASL 0x00000061) @ > 0x000fd564 > ACPI: FADT (v001 DELL 8200 0x00000008 ASL 0x00000061) @ > 0x000fd598 > ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ > 0xfffe5d92 > ACPI: MADT (v001 DELL 8200 0x00000008 ASL 0x00000061) @ > 0x000fd60c > ACPI: BOOT (v001 DELL 8200 0x00000008 ASL 0x00000061) @ > 0x000fd678 > ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ > 0x00000000 > ACPI: PM-Timer IO Port: 0x808 > Built 1 zonelists > Kernel command line: ro root=LABEL=/ > mapped 4G/4G trampoline to ffff4000. > Initializing CPU#0 > CPU 0 irqstacks, hard=023c6000 soft=023c5000 > PID hash table entries: 4096 (order 12: 32768 bytes) > Detected 2254.557 MHz processor. > Using tsc for high-res timesource > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) > Memory: 1033872k/1048028k available (2024k kernel code, 13476k > reserved, 631k data, 144k init, 0k highmem) > Calibrating delay loop... 4440.06 BogoMIPS (lpj=2220032) > Security Scaffold v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > There is already a security framework initialized, register_security > failed. > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 > CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (12) available > CPU: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 04 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > ACPI: IRQ9 SCI: Level Trigger. > checking if image is initramfs... it is > Freeing initrd memory: 386k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xfbe9e, last bus=2 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > ACPI: Subsystem revision 20040715 > ACPI: Interpreter enabled > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (00:00) > PCI: Probing PCI hardware (bus 00) > get_random_bytes called before random driver initialization > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10 > ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 > ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 > ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 3 (level, low) -> IRQ 3 > ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 3 (level, low) -> IRQ 3 > ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10 > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11 > get_random_bytes called before random driver initialization > vesafb: probe of vesafb0 failed with error -6 > Simple Boot Flag at 0x7a set to 0x1 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > apm: overridden by ACPI. > audit: initializing netlink socket (disabled) > audit(1112475725.987:0): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > Initializing Cryptographic API > ksign: Installing public key data > Loading keyring > - Added public key EB180CB126A51024 > - User ID: Red Hat, Inc. (Kernel Module GPG key) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ACPI: Processor [CPU0] (supports C1) > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12 > Linux agpgart interface v0.100 (c) Dave Jones > agpgart: Detected an Intel i850 Chipset. > agpgart: Maximum main memory to use for agp memory: 941M > agpgart: AGP aperture is 128M @ 0xe8000000 > Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing > enabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > divert: not allocating divert_blk for non-ethernet device lo > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > ICH2: IDE controller at PCI slot 0000:00:1f.1 > ICH2: chipset revision 4 > ICH2: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > hda: WDC WD800JB-00CRA1, ATA DISK drive > Using cfq io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > Probing IDE interface ide2... > ide2: Wait for ready failed before probe ! > Probing IDE interface ide3... > ide3: Wait for ready failed before probe ! > Probing IDE interface ide4... > ide4: Wait for ready failed before probe ! > Probing IDE interface ide5... > ide5: Wait for ready failed before probe ! > hda: max request size: 128KiB > hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, > UDMA(100) > hda: cache flushes not supported > hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3 > hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > ide-floppy driver 0.99.newide > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > mice: PS/2 mouse device common for all mice > serio: i8042 AUX port at 0x60,0x64 irq 12 > input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 > serio: i8042 KBD port at 0x60,0x64 irq 1 > input: AT Translated Set 2 keyboard on isa0060/serio0 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > NET: Registered protocol family 2 > IP: routing cache hash table of 2048 buckets, 64Kbytes > TCP: Hash tables configured (established 262144 bind 37449) > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > ACPI: (supports S0 S1 S3 S4 S5) > ACPI wakeup devices: > VBTN PCI0 USB0 USB1 PCI1 KBD > Freeing unused kernel memory: 144k freed > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > inserting floppy driver for 2.6.8-1.541 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > 8139too Fast Ethernet driver 0.9.27 > ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 3 (level, low) -> IRQ 3 > divert: allocating divert_blk for eth0 > eth0: RealTek RTL8139 at 0xec00, 00:c0:a8:80:fc:3e, IRQ 3 > eth0: Identified 8139 chip type 'RTL-8139C' > USB Universal Host Controller Interface driver v2.2 > ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 > uhci_hcd 0000:00:1f.2: UHCI Host Controller > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > uhci_hcd 0000:00:1f.2: irq 11, io base 0000ff80 > uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 > uhci_hcd 0000:00:1f.4: UHCI Host Controller > PCI: Setting latency timer of device 0000:00:1f.4 to 64 > uhci_hcd 0000:00:1f.4: irq 9, io base 0000ff60 > uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > usb 2-2: new full speed USB device using address 2 > Bluetooth: Core ver 2.6 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: HCI USB driver ver 2.7 > usbcore: registered new driver hci_usb > ACPI: Power Button (FF) [PWRF] > EXT3 FS on hda3, internal journal > device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda9, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda10, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda6, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda8, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda7, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1076000k swap on /dev/hda5. Priority:-1 extents:1 > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] > parport0: irq 7 detected > ip_tables: (C) 2000-2002 Netfilter core team > ip_tables: (C) 2000-2002 Netfilter core team > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > Bluetooth: L2CAP ver 2.3 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM ver 1.3 > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > i2c /dev entries driver > NET: Registered protocol family 10 > Disabled Privacy Extensions on device 02359760(lo) > IPv6 over IPv4 tunneling driver > divert: not allocating divert_blk for non-ethernet device sit0 > ip_tables: (C) 2000-2002 Netfilter core team > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] > parport0: irq 7 detected > lp0: using parport0 (polling). > lp0: console ready > eth0: no IPv6 routers present > ISO 9660 Extensions: Microsoft Joliet Level 3 > ISO 9660 Extensions: RRIP_1991A > Bluetooth: BNEP (Ethernet Emulation) ver 1.2 > Bluetooth: BNEP filters: protocol multicast > CSLIP: code copyright 1989 Regents of the University of California > PPP generic driver version 2.4.2 > divert: not allocating divert_blk for non-ethernet device ppp0 > PPP Deflate Compression module registered > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > divert: no divert_blk to free, ppp0 not ethernet > divert: not allocating divert_blk for non-ethernet device ppp0 > > > > > ===================== hcid.conf =================================== > > # > # HCI daemon configuration file. > # > # $Id: hcid.conf,v 1.4 2004/04/29 20:14:21 holtmann Exp $ > # > > # HCId options > options { > # Automatically initialize new devices > autoinit yes; > > # Security Manager mode > # none - Security manager disabled > # auto - Use local PIN for incoming connections > # user - Always ask user for a PIN > # > security auto; > > # Pairing mode > # none - Pairing disabled > # multi - Allow pairing with already paired devices > # once - Pair once and deny successive attempts > pairing multi; > > # PIN helper > pin_helper /usr/bin/bluepin; > > # D-Bus PIN helper > #dbus_pin_helper; > } > > # Default settings for HCI devices > device { > # Local device name > # %d - device id > # %h - host name > name "%h-%d"; > > # Local device class > class 0x120104; > > # Default packet type > #pkt_type DH1,DM1,HV1; > > # Inquiry and Page scan > iscan enable; pscan enable; > > # Default link mode > # none - no specific policy > # accept - always accept incoming connections > # master - become master on incoming connections, > # deny role switch on outgoing connections > # > #lm accept,master; > # > lm accept; > > # Default link policy > # none - no specific policy > # rswitch - allow role switch > # hold - allow hold mode > # sniff - allow sniff mode > # park - allow park mode > # > #lp hold,sniff; > # > lp rswitch,hold,sniff,park; > > # Authentication and Encryption > auth disable; > encrypt disable; > } > > > > > > > On Apr 2, 2005, at 9:54 AM, Gary Albelli wrote: > >> I have creates a Bluetooth serial connection on OSX. I am trying to >> connect to a BlueZ NAP on a Fedora linux box. It appears to connect, >> i see this in the log on the Linux box, but the OSX client shows >> "Authenticating" but never does. >> >> >