From: Brad Midgley <bmidgley@xmission.com>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] pskey bootmode value
Date: Sun, 22 May 2005 09:02:13 -0600 [thread overview]
Message-ID: <42909EF5.7060204@xmission.com> (raw)
In-Reply-To: <Pine.LNX.4.33.0505221634050.32193-100000@redbean.intranet.gw-instruments.de>
Peter,
Maybe you didn't see that Marcel put a "pskey" program in
bluez-utils-cvs. It will look up the bootmode key but doesn't give any
suggestions for the value.
I just updated the adapter:
/usr/src/bluez/utils/tools/pskey -i hci1 bootmode 0
and it's working with the new default bootmode. I disliked the hid2hci
requirement so this is nice.
Brad
Peter Wippich wrote:
> Hi Brad,
>
> there is a PSKEY which allows you to set the default Boot Mode if you
> don't want the dongle to start up in HID mode you've to set this to Boot Mode 0
> (HCI). If you don't have the CSR software to change this: it is PSKEY
> 0x03CD. Should be 0001 on your device. Set to 0000 to boot up in HCI mode.
>
> Good luck,
>
> Peter
>
>
> On Sun, 22 May 2005, Brad Midgley wrote:
>
>
>>Peter,
>>
>>Thanks for the confirmation.
>>
>>Yes, this is a CSR dongle (it's the dlink dbt-120, notorious for
>>prefering hid mode after the v1.2 firmware update from apple)
>>
>>i believe I saw code in pskey to bail out if it's not a CSR chip...
>>
>>brad
>>
>>Peter Wippich wrote:
>>
>>>Hi Brad,
>>>
>>>bootmode is nothing which depends on BlueZ but on the dongle you use. If
>>>you have a CSR Dongle which uses the BlueLab Dual Boot Firmware than
>>>bootmode 0 is HCI and bootmode 1 is HID mode. However, every
>>>manufacturer can choose what he wants....
>>>
>>>To be sure what you have you have to consult the manufacturers
>>>documentation for your dongle. But I'm afraid for most devices this isn't
>>>documented at all.
>>>
>>>Ciao,
>>>
>>>Peter
>>>
>>>
>>>On Fri, 20 May 2005, Brad Midgley wrote:
>>>
>>>
>>>
>>>>Hi
>>>>
>>>>What bootmode value should I use for hci? I see 0x0001 for hid but I
>>>>don't want to just "guess" that it's 0...
>>>>
>>>>Brad
>>>>
>>>>
>>>>-------------------------------------------------------
>>>>This SF.Net email is sponsored by Oracle Space Sweepstakes
>>>>Want to be the first software developer in space?
>>>>Enter now for the Oracle Space Sweepstakes!
>>>>http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
>>>>_______________________________________________
>>>>Bluez-devel mailing list
>>>>Bluez-devel@lists.sourceforge.net
>>>>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>>>
>>>
>>>
>>>| Peter Wippich Voice: +49 30 46776411 |
>>>| G&W Instruments GmbH fax: +49 30 46776419 |
>>>| Gustav-Meyer-Allee 25, Geb. 12 Email: pewi@gw-instruments.de |
>>>| D-13355 Berlin / Germany |
>>>
>>>
>>>
>>>
>>>-------------------------------------------------------
>>>This SF.Net email is sponsored by Oracle Space Sweepstakes
>>>Want to be the first software developer in space?
>>>Enter now for the Oracle Space Sweepstakes!
>>>http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
>>>_______________________________________________
>>>Bluez-devel mailing list
>>>Bluez-devel@lists.sourceforge.net
>>>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>
>>
>>-------------------------------------------------------
>>This SF.Net email is sponsored by Oracle Space Sweepstakes
>>Want to be the first software developer in space?
>>Enter now for the Oracle Space Sweepstakes!
>>http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
>>_______________________________________________
>>Bluez-devel mailing list
>>Bluez-devel@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>
>
>
> | Peter Wippich Voice: +49 30 46776411 |
> | G&W Instruments GmbH fax: +49 30 46776419 |
> | Gustav-Meyer-Allee 25, Geb. 12 Email: pewi@gw-instruments.de |
> | D-13355 Berlin / Germany |
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2005-05-22 15:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-21 3:57 [Bluez-devel] pskey bootmode value Brad Midgley
2005-05-22 13:50 ` Peter Wippich
2005-05-22 14:25 ` Brad Midgley
2005-05-22 14:41 ` Peter Wippich
2005-05-22 15:02 ` Brad Midgley [this message]
2005-05-22 15:12 ` Peter Wippich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42909EF5.7060204@xmission.com \
--to=bmidgley@xmission.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox