Linux bluetooth development
 help / color / mirror / Atom feed
From: Luca Pizzamiglio <pizzamiglio@cefriel.it>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] btsco and Musicool 300
Date: Mon, 27 Jun 2005 15:19:37 +0200	[thread overview]
Message-ID: <42BFFCE9.6060703@cefriel.it> (raw)
In-Reply-To: <42BABCBE.1060200@cefriel.it>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi.
I've solved my problems: battery lifewas ending, so Musicool headset
dosn'work so well.
Now it's run. I've only tried sco link, but next time I'll try A2DP profile.

Cheers,
Pizza


Luca Pizzamiglio wrote:
> Hi.
> I'm trying to use the Musicool 300 headset with BlueZ.
> I see Marcel Holtmann reports on him site.
> I have some trouble because my headset doesn't reply to my question:
> 
> ~# hcitool inq
> Inquiring ...
>         00:0B:0D:50:15:C7       clock offset: 0x2705    class: 0x200404
> ~# hcitool name 00:0B:0D:50:15:C7
> Headphone[15C7]
> ~# hcitool info 00:0B:0D:50:15:C7
> Requesting information ...
> Can't create connection: Connection timed out
> ~#
> 
> I report hcidump output:
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
>     bdaddr 00:0B:0D:50:15:C7 mode 2 clkoffset 0x0000
> 
>>>HCI Event: Command Status (0x0f) plen 4
> 
>     Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> 
>>>HCI Event: Remote Name Req Complete (0x07) plen 255
> 
>     status 0x00 bdaddr 00:0B:0D:50:15:C7 name 'Headphone[15C7]'
> 
> < HCI Command: Create Connection (0x01|0x0005) plen 13
>     bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
>     Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> 
>>>HCI Event: Command Status (0x0f) plen 4
> 
>     Create Connection (0x01|0x0005) status 0x00 ncmd 1
> 
>>>HCI Event: PIN Code Request (0x16) plen 6
> 
>     bdaddr 00:0B:0D:50:15:C7
> 
>>>HCI Event: Connect Complete (0x03) plen 11
> 
>     status 0x22 handle 41 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
>     Error: LMP Response Timeout
> 
> When I try to connect btsco with the headset, I obtain:
> 
> ~# btsco 00:0B:0D:50:15:C7
> Error: Failed to connect to SDP server: Function not implemented
> Assuming channel 2
> 
> Can't connect RFCOMM channel: Resource temporarily unavailable
> ~#
> 
> and the hcidump output is:
> 
> < HCI Command: Create Connection (0x01|0x0005) plen 13
>     bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
>     Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> 
>>>HCI Event: Command Status (0x0f) plen 4
> 
>     Create Connection (0x01|0x0005) status 0x00 ncmd 1
> 
>>>HCI Event: PIN Code Request (0x16) plen 6
> 
>     bdaddr 00:0B:0D:50:15:C7
> 
>>>HCI Event: Connect Complete (0x03) plen 11
> 
>     status 0x22 handle 41 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
>     Error: LMP Response Timeout
> < HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> 
>>>HCI Event: Command Complete (0x0e) plen 6
> 
>     Read Voice Setting (0x03|0x0025) ncmd 1
>     status 0x00 voice setting 0x0060
> < HCI Command: Create Connection (0x01|0x0005) plen 13
>     bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
>     Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> 
>>>HCI Event: Command Status (0x0f) plen 4
> 
>     Create Connection (0x01|0x0005) status 0x00 ncmd 1
> 
>>>HCI Event: PIN Code Request (0x16) plen 6
> 
>     bdaddr 00:0B:0D:50:15:C7
> 
>>>HCI Event: Connect Complete (0x03) plen 11
> 
>     status 0x22 handle 42 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
>     Error: LMP Response Timeout
> 
> 
> pin helper application doesn't start in both cases.
> Any ideas or suggestions?
> 
> thx in advance!
> 
> PS: with the same system, I've configured a working NAP, so my bluetooth
> dongle is ok.

- -------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone:		+39 02 23954 343
e-mail:		pizzamiglio@cefriel.it
ICQ:		5046978
- -------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCv/zpAoUy56ORfbERAsqkAJ9TXse+opDyx9FOQK6ZFu15glmtKgCgjiKy
E7HdyIiIbepfKW6BthC9Qrk=
=nObX
-----END PGP SIGNATURE-----


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

      reply	other threads:[~2005-06-27 13:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-06-23 13:44 [Bluez-users] btsco and Musicool 300 Luca Pizzamiglio
2005-06-27 13:19 ` Luca Pizzamiglio [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42BFFCE9.6060703@cefriel.it \
    --to=pizzamiglio@cefriel.it \
    --cc=bluez-users@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox