From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <4303A01D.6030104@xmission.com> From: Brad Midgley MIME-Version: 1.0 To: bluez-devel@lists.sourceforge.net Subject: Re: [Bluez-devel] SCO over UART References: <4302F91F.7020202@umit.at> In-Reply-To: <4302F91F.7020202@umit.at> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 17 Aug 2005 14:37:49 -0600 David > i'm using an ericsson "ROK 101008" bluetooth module and kernel 2.6.10. > the module can be connected via usb or rs232. and i found an ericsson > specific hci command to switch the sco-path to HCI (it is set to PCM by > default). What is the ericsson command and how do you inject it into hci? Is the rok101008 similar in this respect to the rok104001? That's what's on the gumstix.com board and I've been *very* interested in getting sco working with this. I thought it couldn't be coaxed into using hci. Brad ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel