From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <4305B185.2080604@umit.at> From: David Bannach MIME-Version: 1.0 To: bluez-devel@lists.sourceforge.net Subject: Re: [Bluez-devel] SCO over UART References: <4302F91F.7020202@umit.at> <4303A01D.6030104@xmission.com> In-Reply-To: <4303A01D.6030104@xmission.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 19 Aug 2005 12:16:37 +0200 brad, > What is the ericsson command and how do you inject it into hci? > > Is the rok101008 similar in this respect to the rok104001? That's > what's on the gumstix.com board and I've been *very* interested in > getting sco working with this. I thought it couldn't be coaxed into > using hci. the command is "ericsson_set_sco_data_path". i found it in this document (only): http://www.vs.inf.ethz.ch/res/proj/smart-its/dl/ROK_101_007_revR1C-HCI_ericsson_specific.pdf i use hcitool for sending the command to the module, e.g. the following line will set the sco mapping to hci: hcitool cmd 0x3f 0x001d 0x00 the rok101008 and rok104001 seem very similar. at least the command above returns a positive response on both devices. i did not notice differences of these devices so far. actually i want to get sco running on the rok104001 which is built into a qbic (pxa based wearable) but it's easier to try things with an external module attached to a notebook. i'm still having the problem that bluez does not send any sco data to the module. i'm really curious about your results. david ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel