From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <434D4765.603@imap.cc> From: Alex Viskovatoff MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Logitech diNovo hub not recognized References: <434C6E2E.9070105@imap.cc> <1129097566.4922.1.camel@localhost.localdomain> In-Reply-To: <1129097566.4922.1.camel@localhost.localdomain> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 12 Oct 2005 13:27:01 -0400 Hi Marcel, Thanks much for your response. I compiled and installed bluez-libs-2.21 and bluez-utils-2.21, removing the corresponding Fedora binary packages. Unfortunately, hid2hci and hciconfig -a produced exactly the same results. Here is the output of /proc/bus/usb/devices, with only the Logitech receiver inserted: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 B: Alloc= 42/900 us ( 5%), #Int= 4, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.13-1.1526_av0 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0451 ProdID=2036 Rev= 1.01 S: Product=General Purpose USB Hub C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=abd0 Rev=41.02 S: Manufacturer=Logitech S: Product=Desktop USB stand C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c50c Rev=22.40 S: Manufacturer=Logitech S: Product=USB Receiver C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.13-1.1526_av0 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms (When I saw "Desktop USB stand" in the list above, I removed it and inserted the receiver directly into a USB port, but that didn't change anything.) I am mystified. Thanks and regards, Alex Marcel Holtmann wrote: > Hi Alex, > > >>I am having trouble getting the hub from my Logitech diNovo Cordless >>Desktop Keyboard & Mouse recognized by the Bluetooth system. (The system >>is able to communicate flawlessly with a Palm Tungsten E2, over a D-Link >>DBT-120 USB Bluetooth dongle.) I have looked at earlier posts on this >>list dealing with this device, but all previous posters were able to get >>this hub recognized as a Bluetooth device, as far as I have been able to >>tell. The keyboard and mouse work fine in HID mode. >> >>I am running a Fedora-modified 2.6.13 kernel. My understanding is that >>recent kernels should have sufficient Bluetooth support, so that a Bluez >>patch is not necessary. (Anyway, I tried patch-2.6.13-mh1, and the >>resulting kernel didn't work any better.) I am using the current Fedora >>Core 4 version of bluez-utils, bluez-utils-2.15-7. > > > the latest version is bluez-utils-2.21 and you might wanna try it. > > >>Here is what the system log shows when the device is insterted: >> >>Oct 11 21:20:03 georg kernel: usb 2-4.2: new low speed USB device using >>ohci_hcd and address 39 >>Oct 11 21:20:03 georg kernel: input: USB HID v1.10 Keyboard [Logitech >>USB Receiver] on usb-0000:00:02.0-4.2 >>Oct 11 21:20:03 georg hal.hotplug[32675]: DEVPATH is not set (subsystem >>input) >>Oct 11 21:20:03 georg kernel: input,hiddev96: USB HID v1.10 Mouse >>[Logitech USB Receiver] on usb-0000:00:02.0-4.2 >>Oct 11 21:20:04 georg hal.hotplug[32706]: DEVPATH is not set (subsystem >>input) > > > What does /proc/bus/usb/devices shows you? > > Regards > > Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users