From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <43815F5F.8030402@masaka.cs.ohiou.edu> From: Jim Wyllie MIME-Version: 1.0 To: bluez-devel@lists.sourceforge.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: [Bluez-devel] Problem setting the flush timeout Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 21 Nov 2005 00:47:11 -0500 To whomever may be able to help: I have been pulling my hair for quite some time at the set-flush-timeout.c code segment I was referred to use to set the flush timeout for a bluetooth device. The call to hci_get_route( bdaddr_t* ) is failing, even though I directly cut-and-pasted the code. I verified that the address I'm passing does exist on the system. It's setting errno to 19 and claiming that the device doesn't exist even though I'm 100% positive that it does (hcitool dev shows it's 00:11:95:4F:FD:22, and cr -> bdaddr_t.b[5] through cr -> bdaddr_t.b[0] are the same values, copied in using str2ba). The device does definitely exist on the system. Any other idea why this might be happening? Thanks for your help, Jim Rather than flood your list, the code segment can be found at: http://people.csail.mit.edu/albert/bluez-intro/x556.html#bzi-l2cap-unreliable ------------------------------------------------------- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel