From: David Geiger <info@david-geiger.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] No sound with SonyEricsson HBH-PV700
Date: Tue, 20 Dec 2005 00:54:27 +0100 [thread overview]
Message-ID: <43A74833.90804@david-geiger.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 23088 bytes --]
Hi everybody!
Just had my first look at btsco. I compiled the sources from CVS and
everything seems to be fine as I get a connection with the headset and
e.g. an event is submitted when I press the dial button.
Anyway, when I try sending a sound either directly to /dev/dsp1 or using
aplay, a connection is obviously established but the only thing I hear
is constant noise as long as the connection lasts.
As I've got no idea whether it simply doesn't work with the headset or
there is another problem I try to post all possible information and
maybe someone can help. Hope it's not an information overflow. ;)
* Whether there is a hub between your computer and bluetooth adapter
(you should avoid this especially if it's a usb 2.0 hub)
It doesn't work either with or withour a hub.
* Manufacturer and model of headset and bluetooth adapter
SonyEricsson HBH-PV700 and Bluetooth USB Dongle BLUE Buffalo, Model: BB1005
* Output from hciconfig -a
hci0: Type: USB
BD Address: 00:0B:0D:32:5B:1A ACL MTU: 120:20 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:2496 acl:57 sco:0 events:109 errors:0
TX bytes:1211 acl:34 sco:0 commands:59 errors:0
Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ blizzmo (0)'
Class: 0x10010c
Service Classes:
Device Class: Computer, Laptop
HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x757
Manufacturer: Silicon Wave (11)
* Output from hciconfig hci0 revision (Run hciconfig as root)
hci0: Type: USB
BD Address: 00:0B:0D:32:5B:1A ACL MTU: 120:20 SCO MTU: 64:0
Unsupported manufacturer
o If it prints "SCO mapping: HCI" then your adapter should work.
o If it prints "SCO mapping: PCM" then you might permanently
change the setting using a command like "pskey mapsco 0" using
bluez-utils-cvs but this is at your own risk.
o If it doesn't print either of those, you probably need a
different bluetooth adapter (preferably "CSR" based)
Seems like it doesn't print either of those...? What exactly is the SCO
mapping and do I really need another bluetooth adapter?
* Output from hcitool info bdaddr where bdaddr is the headset's address
Requesting information ...
BD Address: 00:12:EE:17:DA:35
Device Name: HBH-PV700
LMP Version: 1.1 (0x1) LMP Subversion: 0x9240
Manufacturer: Philips Semiconductors (37)
Features: 0xbc 0x28 0x01 0x00 0x00 0x00 0x00 0x00
<encryption> <slot offset> <timing accuracy> <role switch>
<sniff mode> <SCO link> <HV3 packets> <CVSD>
* The output btsco -v or a2play prints to the screen
# btsco 00:12:EE:17:DA:35 -v -r
btsco v0.4c
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
recieved AT*ECBP=?
recieved AT+CLIP=1
recieved AT+CSCS="UTF-8"
recieved AT+CLAN?
--> aplay -B 1000000 -D plughw:Headset ~/Sounds/newmail.wav
speaker volume: 15 mic volume: 1
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
speaker volume: 15 mic volume: 1
driver is not in use
disconnected SCO channel
recieved AT+VGS=15
Sending up speaker change 15
# mpg123 --au - ~/Sounds/newmail.mp3 | ./a2play 00:12:EE:17:DA:35
subbands = 8 blocks = 16 bitpool = 32
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
Version 0.59q (2002/03/23). Written and copyrights by Joe Drew.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
Directory: /home/david/Sounds/
Playing MPEG stream from newmail.mp3 ...
MPEG 1.0 layer III, 320 kbit/s, 44100 Hz stereo
len=2048
Header size=28
Sample Rate:44100
Channels:2
Using address: 00:12:EE:17:DA:35
Found A2DP Sink at the destination
Can't connect to 35:DA:17:EE:12:00. Connection refused(111)
cannot open psm_cmd = 25
* Output from hcidump -X while running btsco or a2play if appropriate
during btsco -v:
# hcidump -X
hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 1.24
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 35 da 17 ee 12 00 18 cc 02 00 00 00 01 5............
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Link Key Request (0x17) plen 6
0000: 35 da 17 ee 12 00 5.....
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
0000: 35 da 17 ee 12 00 d1 af 4a 72 b8 ac a0 e8 61 4f 5.......Jr....aO
0010: 8b 38 70 36 72 38 .8p6r8
> HCI Event: Command Complete (0x0e) plen 10
0000: 01 0b 04 00 35 da 17 ee 12 00 ....5.....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 03 00 35 da 17 ee 12 00 01 00 ...5.......
< ACL data: handle 3 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 03 00 0f 00 ....
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
0000: 00 03 00 18 cc .....
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 03 00 ......
> ACL data: handle 3 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0053 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
< ACL data: handle 3 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0053 flags 0x00 clen 0
> ACL data: handle 3 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 454
< ACL data: handle 3 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0053 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 1
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
Success
MTU 454
< ACL data: handle 3 flags 0x02 dlen 24
L2CAP(d): cid 0x0053 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 17
> ACL data: handle 3 flags 0x01 dlen 17
> ACL data: handle 3 flags 0x01 dlen 17
> ACL data: handle 3 flags 0x01 dlen 17
> ACL data: handle 3 flags 0x01 dlen 17
> ACL data: handle 3 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 102 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x61
count 94
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1108 (Headset) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1108 (Headset) uint 0x100 > >
aid 0x0100 (SrvName)
str "SonyEricsson Headset Service"
aid 0x0302 (unknown)
bool 0x1
cont 00
< ACL data: handle 3 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0053 scid 0x0040
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 25 0c 00 60 00 .%..`.
< ACL data: handle 3 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> ACL data: handle 3 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0053 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0054 scid 0x0041 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
< ACL data: handle 3 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0054 flags 0x00 clen 4
MTU 1024
> ACL data: handle 3 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 454
< ACL data: handle 3 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0054 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 1
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
Success
MTU 454
< ACL data: handle 3 flags 0x02 dlen 8
L2CAP(d): cid 0x0054 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
< ACL data: handle 3 flags 0x02 dlen 18
L2CAP(d): cid 0x0054 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 449 max_retrans 0 credits 7
> ACL data: handle 3 flags 0x02 dlen 17
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x01 dlen 2
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 0 ack_timer 0
frame_size 449 max_retrans 0 credits 0
< ACL data: handle 3 flags 0x02 dlen 8
L2CAP(d): cid 0x0054 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 3 flags 0x02 dlen 12
L2CAP(d): cid 0x0054 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 3 flags 0x02 dlen 13
L2CAP(d): cid 0x0041 len 9 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 7
< ACL data: handle 3 flags 0x02 dlen 12
L2CAP(d): cid 0x0054 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 13
L2CAP(d): cid 0x0041 len 9 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 7
< ACL data: handle 3 flags 0x02 dlen 9
L2CAP(d): cid 0x0054 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 2
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 10 fcs 0x40
0000: 41 54 2a 45 43 42 50 3d 3f 0d AT*ECBP=?.
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 10
L2CAP(d): cid 0x0041 len 6 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 2
< ACL data: handle 3 flags 0x02 dlen 14
L2CAP(d): cid 0x0054 len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 2
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 10 fcs 0x40
0000: 41 54 2b 43 4c 49 50 3d 31 0d AT+CLIP=1.
< ACL data: handle 3 flags 0x02 dlen 14
L2CAP(d): cid 0x0054 len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 10
L2CAP(d): cid 0x0041 len 6 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 2
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 8
L2CAP(d): cid 0x0041 len 21 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 16 fcs 0x40
0000: 41 54 2b 43 53 43 53 3d 22 55 54 46 2d 38 22 0d
AT+CSCS="UTF-8".
< ACL data: handle 3 flags 0x02 dlen 14
L2CAP(d): cid 0x0054 len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 17
> ACL data: handle 3 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 9 fcs 0x40
0000: 41 54 2b 43 4c 41 4e 3f 0d AT+CLAN?.
< ACL data: handle 3 flags 0x02 dlen 14
L2CAP(d): cid 0x0054 len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 03 00 01 00 .....
> ACL data: handle 3 flags 0x02 dlen 10
L2CAP(d): cid 0x0041 len 6 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 2
> HCI Event: Mode Change (0x14) plen 6
0000: 00 03 00 02 00 08 ......
< HCI Command: Inquiry (0x01|0x0001) plen 5
0000: 33 8b 9e 06 00 3....
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 01 04 ....
> HCI Event: Inquiry Complete (0x01) plen 1
0000: 00
--> aplay -B 1000000 -D plughw:Headset ~/Sounds/newmail.wav
> HCI Event: Mode Change (0x14) plen 6
0000: 00 01 00 02 00 08 ......
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(d): cid 0x0058 len 14 [psm 0]
0000: 0b ef 15 41 54 2b 56 47 53 3d 31 35 0d 9a ...AT+VGS=15..
< ACL data: handle 1 flags 0x02 dlen 17
L2CAP(d): cid 0x0058 len 13 [psm 0]
0000: 0b ef 13 41 54 2b 56 47 4d 3d 31 0d 9a ...AT+VGM=1..
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
0000: 01 00 e0 00 ....
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 07 04 ....
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
> ACL data: handle 1 flags 0x02 dlen 10
L2CAP(d): cid 0x0041 len 6 [psm 0]
0000: 09 ff 00 00 02 5c .....\
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 00 01 35 da 17 ee 12 00 00 00 ...5.......
> SCO data: handle 256 dlen 48
0000: ff ff fd ff fa ff fb ff fd ff fc ff fc ff fc ff ................
0010: fd ff fc ff fd ff fe ff fe ff fe ff fd ff fd ff ................
0020: fe ff fd ff fe ff fe ff fd ff fe ff fd ff fe ff ................
[...]
> HCI Event: Mode Change (0x14) plen 6
0000: 00 01 00 00 00 00 ......
> ACL data: handle 1 flags 0x02 dlen 17
> ACL data: handle 1 flags 0x01 dlen 2
L2CAP(d): cid 0x0041 len 15 [psm 0]
0000: 09 ef 14 00 41 54 2b 56 47 53 3d 31 35 0d 40
....AT+VGS=15.@
< ACL data: handle 1 flags 0x02 dlen 14
L2CAP(d): cid 0x0058 len 10 [psm 0]
0000: 0b ef 0d 0d 0a 4f 4b 0d 0a 9a .....OK...
> SCO data: handle 256 dlen 48
0000: fd ff fd ff fd ff fd ff fd ff fd ff fd ff fd ff ................
0010: fd ff fd ff fd ff fd ff fd ff fd ff fd ff fd ff ................
0020: fd ff fd ff fd ff fd ff fd ff fd ff fd ff fd ff ................
> SCO data: handle 256 dlen 48
0000: fd ff fd ff fd ff fd ff fd ff fd ff fd ff fd ff ................
0010: fd ff fd ff fd ff fd ff fd ff fd ff fd ff fd ff ................
0020: fd ff fd ff fd ff fd ff fd ff fd ff fd ff fd ff ................
> SCO data: handle 256 dlen 48
0000: fd ff fd ff fd ff fd ff fd ff fd ff fe ff 03 00 ................
0010: 10 00 0a 00 fa ff 0e 00 0e 00 00 00 14 00 0d 00 ................
0020: 08 00 12 00 0d 00 06 00 fc ff 07 00 07 00 05 00 ................
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 00 01 16 ....
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
> HCI Event: Mode Change (0x14) plen 6
0000: 00 01 00 02 00 08 ......
during a2play:
# hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 1.24
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
0000: 35 da 17 ee 12 00 18 cc 02 00 00 00 01 5............
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Link Key Request (0x17) plen 6
0000: 35 da 17 ee 12 00 5.....
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
0000: 35 da 17 ee 12 00 d1 af 4a 72 b8 ac a0 e8 61 4f 5.......Jr....aO
0010: 8b 38 70 36 72 38 .8p6r8
> HCI Event: Command Complete (0x0e) plen 10
0000: 01 0b 04 00 35 da 17 ee 12 00 ....5.....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 01 00 35 da 17 ee 12 00 01 00 ...5.......
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
0000: 01 00 0f 00 ....
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
0000: 00 01 00 18 cc .....
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 01 00 ......
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0050 flags 0x00 clen 0
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 454
< ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0050 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
> ACL data: handle 1 flags 0x02 dlen 17
> ACL data: handle 1 flags 0x01 dlen 1
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
Success
MTU 454
< ACL data: handle 1 flags 0x02 dlen 24
L2CAP(d): cid 0x0050 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x110d (AdvAudio)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
> ACL data: handle 1 flags 0x02 dlen 15
L2CAP(d): cid 0x0040 len 11 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x6
count 3
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
< ACL data: handle 1 flags 0x02 dlen 24
L2CAP(d): cid 0x0050 len 20 [psm 1]
SDP SSA Req: tid 0x1 len 0xf
pat uuid-16 0x1200 (PNPInfo)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> ACL data: handle 1 flags 0x02 dlen 15
L2CAP(d): cid 0x0040 len 11 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x6
count 3
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0050 scid 0x0040
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 25 scid 0x0041
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0050 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 2 status 0
Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 01 00 01 00 .....
< HCI Command: Disconnect (0x01|0x0006) plen 3
0000: 01 00 13 ...
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 01 00 16 ....
* Your kernel version and bluez userland versions or distro
2.6.13-15.7-default (SUSE 10.0)
bluez-libs version 2.19-2
* If you have a headset that can do a2dp, try both btsco and a2play
(the significance is that the latter does not use SCO)
a2dp doesn't seem to work at all - don't know if my headset isn't able
to do it.
Best regards, David
--
David Geiger
info@david-geiger.de <mailto:info@david-geiger.de>
[-- Attachment #2: Type: text/html, Size: 43286 bytes --]
next reply other threads:[~2005-12-19 23:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-19 23:54 David Geiger [this message]
2005-12-20 0:12 ` [Bluez-users] No sound with SonyEricsson HBH-PV700 Brad Midgley
2005-12-20 12:09 ` David Geiger
2005-12-21 19:51 ` Brad Midgley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43A74833.90804@david-geiger.de \
--to=info@david-geiger.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).