* [Bluez-devel] btsco occasional loud bursts of static
@ 2006-02-02 3:39 Chase Douglas
2006-02-02 3:59 ` Brad Midgley
0 siblings, 1 reply; 4+ messages in thread
From: Chase Douglas @ 2006-02-02 3:39 UTC (permalink / raw)
To: bluez-devel
I have a dlink dbt-120 rev. b4 bluetooth adapter with a motorola hs850
and I use btsco to talk with people online. When I have my laptop
sitting on my lap, everything works fine. However, when I start to walk
around, the sound transmitted to the other person from my headset will
have bursts of loud static. I am guessing that this is a problem with
the connection being worse. I would like to get this resolved, and I can
do some coding as well. I have a 2 MB hcidump which somewhere near the
end has the offending sound packets. I can't find any documentation on
the SCO protocol, so I can't find where the static was. Can anyone point
me in the right direction?
Thank you,
Chase Douglas
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] btsco occasional loud bursts of static
2006-02-02 3:39 [Bluez-devel] btsco occasional loud bursts of static Chase Douglas
@ 2006-02-02 3:59 ` Brad Midgley
2006-02-02 8:15 ` [Bluez-devel] TODO list Doan Chi-minh
0 siblings, 1 reply; 4+ messages in thread
From: Brad Midgley @ 2006-02-02 3:59 UTC (permalink / raw)
To: bluez-devel
Chase
One thing to check is the code we have to accommodate a byte getting
lost. If we don't watch for this, subsequent samples have what should be
a high byte in the low position and vice-versa, so the result is loud
noise for the remainder of the connection.
I haven't looked closely at this, but it's really baffling to think a
single byte could be lost from a stream of 16-bit samples like that. The
protocol should drop entire samples when the signal is bad--losing
*half* a sample is a worst-case scenario.
Brad
> I have a dlink dbt-120 rev. b4 bluetooth adapter with a motorola hs850
> and I use btsco to talk with people online. When I have my laptop
> sitting on my lap, everything works fine. However, when I start to walk
> around, the sound transmitted to the other person from my headset will
> have bursts of loud static. I am guessing that this is a problem with
> the connection being worse. I would like to get this resolved, and I can
> do some coding as well. I have a 2 MB hcidump which somewhere near the
> end has the offending sound packets. I can't find any documentation on
> the SCO protocol, so I can't find where the static was. Can anyone point
> me in the right direction?
>
> Thank you,
> Chase Douglas
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> for problems? Stop! Download the new AJAX search engine that makes
> searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bluez-devel] TODO list
2006-02-02 3:59 ` Brad Midgley
@ 2006-02-02 8:15 ` Doan Chi-minh
2006-02-02 14:28 ` Brad Midgley
0 siblings, 1 reply; 4+ messages in thread
From: Doan Chi-minh @ 2006-02-02 8:15 UTC (permalink / raw)
To: bluez-devel
Hi,
We're a group of 4 french students and we have a project to do. We have
decidec
to pick up a topic from the ToDo list but after searching on the archive, I
found that almost all things have been begun. So we would like to know if
there's any point that need development. Or maybe I'm wrong and anybody have
begin something from the ToDo list (and in this case, i apologize).
We need a precise subject because it's a work for the university.
Regards, Chi-Minh
ps : sorry if my english is not very comprehensive
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-02-02 14:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-02 3:39 [Bluez-devel] btsco occasional loud bursts of static Chase Douglas
2006-02-02 3:59 ` Brad Midgley
2006-02-02 8:15 ` [Bluez-devel] TODO list Doan Chi-minh
2006-02-02 14:28 ` Brad Midgley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).