* [Bluez-users] No audio with Nokia HDW-3
@ 2006-01-19 4:34 Sid Boyce
2006-01-19 13:45 ` David Greaves
2006-02-12 3:43 ` [Bluez-users] " Sid Boyce
0 siblings, 2 replies; 3+ messages in thread
From: Sid Boyce @ 2006-01-19 4:34 UTC (permalink / raw)
To: bluez-users
I've been battling with the HDW-3 since 2.6.15 on SuSE 10.0 x86_64, the
device is recognised.
# hciconfig hci0 voice 0x0060
# btsco -v 00:03:89:60:F9:CF
btsco v0.41
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
speaker volume: 7 mic volume: 15
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=07
Sending up speaker change 7
speaker volume: 7 mic volume: 15
driver is not in use
disconnected SCO channel
speaker volume: 7 mic volume: 15
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=07
Sending up speaker change 7
speaker volume: 7 mic volume: 15
driver is not in use
disconnected SCO channel
speaker volume: 7 mic volume: 15
speaker volume: 7 mic volume: 15
recieved AT+CKPD=200
Modules
=======
sco 15240 0
snd_bt_sco 15232 0
snd_hwdep 11144 2 snd_usb_audio,snd_bt_sco
bluetooth 51236 8 sco,rfcomm,l2cap,hci_usb
snd_pcm 95116 5
snd_usb_audio,snd_bt_sco,snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_page_alloc 11408 3 snd_bt_sco,snd_via82xx,snd_pcm
snd 62016 15
snd_usb_audio,snd_bt_sco,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_co
dec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
crw------- 1 boycie audio 14, 3 2006-01-16 14:31 /dev/dsp
crw-rw---- 1 boycie audio 14, 19 2006-01-16 15:35 /dev/dsp1 (HDW-3)
From "ps fax"
20343 ? Ss 0:00 /usr/bin/hidd --server
20331 ? Ss 0:00 hcid: processing events
I get no recording or playback. Skype sound device problem report and on
wengophone test, no audio.
# arecord -D hw:1,0 -r 8000 -c 1 -f S16_LE | aplay -
# arecord -D hw:1,0 -r 8000 -c 1 -f S16_LE ZZZ.wav
# aplay -D hw:1,0 /XXX.wav (pre-recorded with plugin mic)
From /var/log/messages
------------------------
snd-bt-sco revision 1.6 $
snd-bt-sco: snd-bt-scod thread starting
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.6
snd-bt-sco: capture_open
snd-bt-sco: playback_open
snd-bt-sco: capture_open
snd-bt-sco: playback_open
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
snd-bt-sco: capture_open
snd-bt-sco: playback_open
snd-bt-sco: capture_open
snd-bt-sco: playback_open
snd-bt-sco: capture_open
snd-bt-sco: playback_open
snd-bt-sco: capture_open
snd-bt-sco: playback_open
snd-bt-sco: capture_open
snd-bt-sco: playback_open
snd-bt-sco: Disposing of previous socket count 2
Looks like it should work but it doesn't, qamix doesn't display any
mixer controls for the HDW-3.
# arecord -D plughw:Headset -f S16_LE|aplay -
Recording WAVE 'stdout' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
Playing WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:1263: read error: Input/output error
I also tried with a2play.
Any ideas welcomed.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Bluez-users] No audio with Nokia HDW-3
2006-01-19 4:34 [Bluez-users] No audio with Nokia HDW-3 Sid Boyce
@ 2006-01-19 13:45 ` David Greaves
2006-02-12 3:43 ` [Bluez-users] " Sid Boyce
1 sibling, 0 replies; 3+ messages in thread
From: David Greaves @ 2006-01-19 13:45 UTC (permalink / raw)
To: bluez-users
Sid Boyce wrote:
> I've been battling with the HDW-3 since 2.6.15 on SuSE 10.0 x86_64,
> the device is recognised.
<snip>
> I also tried with a2play.
> Any ideas welcomed.
> Regards
> Sid.
what does:
hciconfig hci0 revision
show?
(I had this exact problem with my dongle.
I bought a new usb dongle (CS base) and it all works fine...)
David
--
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Bluez-users] Re: No audio with Nokia HDW-3
2006-01-19 4:34 [Bluez-users] No audio with Nokia HDW-3 Sid Boyce
2006-01-19 13:45 ` David Greaves
@ 2006-02-12 3:43 ` Sid Boyce
1 sibling, 0 replies; 3+ messages in thread
From: Sid Boyce @ 2006-02-12 3:43 UTC (permalink / raw)
To: bluez-users
The problem is with the Broadcom chipset. I've now bought a new "Fresh"
dongle with the CSR chipset and audio is now OK, even works with Skype.
Regards
Sid.
Sid Boyce wrote:
> I've been battling with the HDW-3 since 2.6.15 on SuSE 10.0 x86_64, the
> device is recognised.
> # hciconfig hci0 voice 0x0060
> # btsco -v 00:03:89:60:F9:CF
> btsco v0.41
> Device is 1:0
> Voice setting: 0x0060
> RFCOMM channel 1 connected
> speaker volume: 7 mic volume: 15
> i/o needed: connecting sco...
> connected SCO channel
> Done setting sco fd
> recieved AT+VGS=07
> Sending up speaker change 7
> speaker volume: 7 mic volume: 15
> driver is not in use
> disconnected SCO channel
> speaker volume: 7 mic volume: 15
> i/o needed: connecting sco...
> connected SCO channel
> Done setting sco fd
> recieved AT+VGS=07
> Sending up speaker change 7
> speaker volume: 7 mic volume: 15
> driver is not in use
> disconnected SCO channel
> speaker volume: 7 mic volume: 15
> speaker volume: 7 mic volume: 15
> recieved AT+CKPD=200
>
> Modules
> =======
> sco 15240 0
> snd_bt_sco 15232 0
> snd_hwdep 11144 2 snd_usb_audio,snd_bt_sco
> bluetooth 51236 8 sco,rfcomm,l2cap,hci_usb
> snd_pcm 95116 5
> snd_usb_audio,snd_bt_sco,snd_pcm_oss,snd_via82xx,snd_ac97_codec
> snd_page_alloc 11408 3 snd_bt_sco,snd_via82xx,snd_pcm
> snd 62016 15
> snd_usb_audio,snd_bt_sco,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_co
>
> dec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
>
> crw------- 1 boycie audio 14, 3 2006-01-16 14:31 /dev/dsp
> crw-rw---- 1 boycie audio 14, 19 2006-01-16 15:35 /dev/dsp1 (HDW-3)
>
> From "ps fax"
> 20343 ? Ss 0:00 /usr/bin/hidd --server
> 20331 ? Ss 0:00 hcid: processing events
>
>
> I get no recording or playback. Skype sound device problem report and on
> wengophone test, no audio.
> # arecord -D hw:1,0 -r 8000 -c 1 -f S16_LE | aplay -
> # arecord -D hw:1,0 -r 8000 -c 1 -f S16_LE ZZZ.wav
> # aplay -D hw:1,0 /XXX.wav (pre-recorded with plugin mic)
>
> From /var/log/messages
> ------------------------
> snd-bt-sco revision 1.6 $
> snd-bt-sco: snd-bt-scod thread starting
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM ver 1.6
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> Bluetooth: SCO (Voice Link) ver 0.5
> Bluetooth: SCO socket layer initialized
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> snd-bt-sco: capture_open
> snd-bt-sco: playback_open
> snd-bt-sco: Disposing of previous socket count 2
>
> Looks like it should work but it doesn't, qamix doesn't display any
> mixer controls for the HDW-3.
>
> # arecord -D plughw:Headset -f S16_LE|aplay -
> Recording WAVE 'stdout' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
> Playing WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
> arecord: pcm_read:1263: read error: Input/output error
>
> I also tried with a2play.
> Any ideas welcomed.
> Regards
> Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-02-12 3:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-19 4:34 [Bluez-users] No audio with Nokia HDW-3 Sid Boyce
2006-01-19 13:45 ` David Greaves
2006-02-12 3:43 ` [Bluez-users] " Sid Boyce
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).