From: Niv <nivv@cs.bgu.ac.il>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] A2DP doesnt work after a clean reset
Date: Wed, 15 Feb 2006 18:20:54 +0200 [thread overview]
Message-ID: <43F354E6.2040209@cs.bgu.ac.il> (raw)
$ mpg123 --au -
"mp3/imogen_heap/speak_for_yourself/goodnight_and_go.mp3" |
/usr/bin/a2play -v 00:0D:44:44:90:F3
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
Version 0.59q (2002/03/23). Written and copyrights by Joe Drew.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
subbands = 8 blocks = 16 bitpool = 32
Title : 02 Artist: Imogen
Heap
Album : Speak For Yourself Year : 2005
Comment: Genre :
Pop
Directory: mp3/imogen_heap/speak_for_yourself/
Playing MPEG stream from goodnight_and_go.mp3 ...
MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo
len=2048
Header size=28
Sample Rate:44100
Channels:2
Using address: 00:0D:44:44:90:F3
Warning: failed to connect to SDP server: Function not implemented
Found A2DP Sink at the destination
Can't connect to F3:90:44:44:0D:00. Function not implemented(38)
cannot open psm_cmd = 25
HCI sniffer - Bluetooth packet analyzer ver 1.29
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:44:90:F3 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 41 bdaddr 00:0D:44:44:90:F3 type ACL encrypt 0x00
Error: LMP Response Timeout
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:44:90:F3 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 42 bdaddr 00:0D:44:44:90:F3 type ACL encrypt 0x00
Error: LMP Response Timeout
$uname -a
Linux blacky 2.6.15-ck3 #7 Sat Feb 11 23:00:51 IST 2006 i686 AMD
Athlon(tm) XP 3200+ AuthenticAMD GNU/Linux
I had to take the adaptor out of the usb , and back in again, then it
worked.
status 0x00
< HCI Command: Write Class of Device (0x03|0x0024) plen 3
class 0x3e0100
> HCI Event: Command Complete (0x0e) plen 4
Write Class of Device (0x03|0x0024) ncmd 1
status 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
Read Local Name (0x03|0x0014) ncmd 1
status 0x00 name 'blacky does BT device (0)'
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:44:90:F3 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:0D:44:44:90:F3
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:0D:44:44:90:F3 key A5F320868AAF3646F25E668A28C35E9C
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:0D:44:44:90:F3
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 41 bdaddr 00:0D:44:44:90:F3 type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 41 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
< ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 41
> ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo rsp: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Max Slots Change (0x1b) plen 3
handle 41 slots 5
< ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
< ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
< ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
< ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
< ACL data: handle 41 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 41 reason 0x08
Reason: Connection Timeout
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:44:90:F3 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:0D:44:44:90:F3
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:0D:44:44:90:F3 key A5F320868AAF3646F25E668A28C35E9C
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:0D:44:44:90:F3
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:0D:44:44:90:F3 type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
0000: 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGHIJKLMNOP
0010: 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60 QRSTUVWXYZ[\]^_`
0020: 61 62 63 64 65 66 67 68 41 42 43 44 abcdefghABCD
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x16
Reason: Connection Terminated by Local Host
Receive failed: Broken pipe
< HCI Command: Reset (0x03|0x0003) plen 0
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2006-02-15 16:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-15 16:20 Niv [this message]
2006-02-15 16:52 ` [Bluez-users] A2DP doesnt work after a clean reset Brad Midgley
2006-02-15 18:25 ` Niv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43F354E6.2040209@cs.bgu.ac.il \
--to=nivv@cs.bgu.ac.il \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).