* Re: Re: [Bluez-devel] infineon adapter init
[not found] <20060516152903.0BCF7ED51@sc8-sf-spam2.sourceforge.net>
@ 2006-05-16 22:01 ` Goetz Issel
0 siblings, 0 replies; only message in thread
From: Goetz Issel @ 2006-05-16 22:01 UTC (permalink / raw)
To: bluez-devel
bluez-devel-request@lists.sourceforge.net wrote:
Hi Brad, hi Marcel,
>Hi Bra#d,
>
>
>>Is anyone using infineon's singlestone pba31307 with bluez?
>>
>>Gumstix just updated their stick with this chip but it comes online at
>>115k and they can't get it to switch to 921kbps... that's the best rate
>>their xscale can do but the chip is changing to some other rate out of
>>range when they try the switch to 921k.
>>
>>
>I tried to get a development kit from Infineon and additional
>information about their chips, but I never succeeded.
>
>
>
we do have the mentioned dev-kit at work, sorry, I can not give it to
you. I am trying to figure out a way to get the exact same chip to work
properly as well. So far I do have the bt-hardware running, connected
via ttyS, using no special initialisation sequence. It is possible
though, that the hardware already "preprogrammed" and it does now run
with 115k, the speed I want to use anyway. I will see if I can test the
921k with it if my time allows that in between, no promise.
I do have a list of init sequences (hci) here but it does not make much
sense to me, the device work fine without any specific things.
I used the bluez-utils..hciattach,hcitool to get the device up, scan for
other bt devices and even connect to them. my who system freezes whe i
want to get the name of a designated bt device address. (hcitool name
xx:xx:xx:xx:xx), but using the hcitool scan work.. which also gives the
names.
Maybe I can give you a name to contact at Infineon, Marcel, to get a kit
for your dev. work, email me direct for that !
Regards,
Goetz
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-05-16 22:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20060516152903.0BCF7ED51@sc8-sf-spam2.sourceforge.net>
2006-05-16 22:01 ` Re: [Bluez-devel] infineon adapter init Goetz Issel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).