From: "Harald Niederländer" <harald.niederlaender@ibmt.fraunhofer.de>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] [Fwd: Re: Problem connecting Bluetooth device]
Date: Wed, 21 Jun 2006 13:22:44 +0200 [thread overview]
Message-ID: <44992C04.2030600@ibmt.fraunhofer.de> (raw)
In-Reply-To: <1150886307.3950.36.camel@localhost>
Hi Marcel,
Marcel Holtmann wrote:
> Hi Harald,
>
>
>
> it seems that the link key is stored totally wrong. Please replace it
> with the link key you see in the first connection attempt and then try
> again.
>
> Regards
>
> Marcel
>
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
these time it seems that the key in linkkeys is OK (without manual
replacing, but why?)
and the alert message"..Authentication Error!" don't appear.
But the connection failed!
doro:/home/harald #
doro:/home/harald # rfcomm connect /dev/rfcomm0 00:11:B1:A2:01:C9
Can't create RFCOMM TTY: Address already in use
doro:/home/harald #
doro:/home/harald # rfcomm connect /dev/rfcomm0 00:11:B1:A2:01:C9
Can't connect RFCOMM socket: Permission denied
The corresponding output of hcidump:
doro:/var/lib/bluetooth # hcidump -X -V -i hci0
HCI sniffer - Bluetooth packet analyzer ver 1.30
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:11:B1:A2:01:C9 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:11:B1:A2:01:C9
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:11:B1:A2:01:C9 len 6 pin '111111'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:11:B1:A2:01:C9
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:11:B1:A2:01:C9 key 2FD1DC3232CA52D349A6E23BF148F25B type 0
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 6 bdaddr 00:11:B1:A2:01:C9 type ACL encrypt 0x01
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 6 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 6
> HCI Event: Max Slots Change (0x1b) plen 3
handle 6 slots 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
< ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 2
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 6 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 17
> ACL data: handle 6 flags 0x01 dlen 1
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 320 max_retrans 0 credits 0
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 3
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 6 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 6 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 2
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 6 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 6 reason 0x16
Reason: Connection Terminated by Local Host
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:11:B1:A2:01:C9 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:11:B1:A2:01:C9
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:11:B1:A2:01:C9 key 2FD1DC3232CA52D349A6E23BF148F25B
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:11:B1:A2:01:C9
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 6 bdaddr 00:11:B1:A2:01:C9 type ACL encrypt 0x01
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 6 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 6
> HCI Event: Max Slots Change (0x1b) plen 3
handle 6 slots 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 4 status 0
Connection refused - no resources available
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 6 reason 0x13
Reason: Remote User Terminated Connection
Regards
Harald
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2006-06-21 11:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4497CE54.5080305@ibmt.fraunhofer.de>
2006-06-21 6:46 ` [Bluez-devel] [Fwd: Re: Problem connecting Bluetooth device] Harald Niederländer
2006-06-21 9:45 ` Marcel Holtmann
2006-06-21 10:22 ` Harald Niederländer
2006-06-21 10:38 ` Marcel Holtmann
2006-06-21 11:22 ` Harald Niederländer [this message]
2006-06-22 15:32 ` yang.guangxiang
2006-06-27 13:33 ` Harald Niederländer
2006-06-27 13:55 ` Wagner Bezerra
2006-06-28 6:02 ` Harald Niederländer
2006-06-28 7:32 ` Marcel Holtmann
2006-06-28 10:51 ` Harald Niederländer
2006-06-28 11:10 ` Marcel Holtmann
2006-06-28 11:29 ` Harald Niederländer
2006-06-28 11:37 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44992C04.2030600@ibmt.fraunhofer.de \
--to=harald.niederlaender@ibmt.fraunhofer.de \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).