Thanks for your reply, Marcel.
I have tried as your instruction, i.e.,
./hciattach ttyS1 any 115200 flow
and get the same result.
And I "diff"ed the hci_h4.c file in linux-2.6.9 and linux-2.6.18 and found they are almost the same.
Who has any ideas?
Thanks in advance.
-----原始邮件-----
发件人:"Marcel Holtmann"
发送时间:2006-10-19 01:20:19
收件人:"BlueZ development"
抄送:(无)
主题:Re: [Bluez-devel] BGB204 Can't init device hci0: Connection timed out (110)
From: "Marcel Holtmann"
To: "BlueZ development"
Date: Thu, 19 Oct 2006 01:20:19 +0800 (CST)
Subject: Re: [Bluez-devel] BGB204 Can't init device hci0: Connection timed out (110)
> Hi,
>
> > I'm using Philips(NXP)BGB204 bluetooth Sip under the Linux 2.6.9
> > kernel and ran into problems now. The scenario was as follows:
>
> I have a BGB208 for testing and have some similar problems. The 2.6.9
> should work fine, but I would prefer if you test with a 2.6.18 kernel
> instead, because that one is more recent.
>
> However the following line should attach the device correctly.
>
> ./hciattach ttyS1 any 115200 flow
>
> If you use the Ericsson id, it will start with 57600 and then try to
> switch into the higher baudrate. As far as I know all BGB from Philips
> boot up by default in 115200.
>
> Regards
>
> Marcel
>
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>