public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: "device_driver" <device_driver@126.com>
To: "bluez development" <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] BGB204 Can't init d evice hci0: Connection timed out (110)
Date: Mon, 6 Nov 2006 16:35:12 +0800 (CST)	[thread overview]
Message-ID: <454EF3C0.000191.16073@bj126app52.126.com> (raw)
In-Reply-To: <453C3732.00005F.08492@bj126app50.126.com>


[-- Attachment #1.1: Type: text/plain, Size: 2517 bytes --]

It turns out to be a hardware design fault, and I have solved it by myself.
Now I can freely transfer files to and from my board through this BGB204 bluetooth Sip.
Thanks anyway

Best regards

Qinghua

在2006-10-23,"device_driver" <device_driver@126.com> 写道:
 From: "device_driver" <device_driver@126.com>
To: "bluez development" <bluez-devel@lists.sourceforge.net>
Date: Mon, 23 Oct 2006 11:29:54 +0800 (CST)
Subject: Re: [Bluez-devel] BGB204 Can't init d evice hci0: Connection timed out (110)

Thanks for your reply, Marcel.
I have tried as your instruction, i.e., 
./hciattach ttyS1 any 115200 flow
and get the same result.
And I "diff"ed the hci_h4.c file in linux-2.6.9 and linux-2.6.18 and found they are almost the same.
Who has any ideas?
Thanks in advance.


-----原始邮件-----
发件人:"Marcel Holtmann" 
发送时间:2006-10-19 01:20:19
收件人:"BlueZ development" 
抄送:(无)
主题:Re: [Bluez-devel] BGB204 Can't init device hci0: Connection timed out (110)


From: "Marcel Holtmann" 

To: "BlueZ development" 

Date: Thu, 19 Oct 2006 01:20:19 +0800 (CST)

Subject: Re: [Bluez-devel] BGB204 Can't init device hci0: Connection timed out (110)







> Hi,

> 

> > I'm using Philips(NXP)BGB204 bluetooth Sip under the Linux 2.6.9

> > kernel and ran into problems now. The scenario was as follows:

> 

> I have a BGB208 for testing and have some similar problems. The 2.6.9

> should work fine, but I would prefer if you test with a 2.6.18 kernel

> instead, because that one is more recent.

> 

> However the following line should attach the device correctly.

> 

> 	./hciattach ttyS1 any 115200 flow

> 

> If you use the Ericsson id, it will start with 57600 and then try to

> switch into the higher baudrate. As far as I know all BGB from Philips

> boot up by default in 115200.

> 

> Regards

> 

> Marcel

> 

> 

> 

> -------------------------------------------------------------------------

> Using Tomcat but need to do more? Need to support web services, security?

> Get stuff done quickly with pre-integrated technology to make your job easier

> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo

> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

> _______________________________________________

> Bluez-devel mailing list

> Bluez-devel@lists.sourceforge.net

> https://lists.sourceforge.net/lists/listinfo/bluez-devel

> 


[-- Attachment #1.2: Type: text/html, Size: 4151 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2006-11-06  8:35 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-17  3:02 [Bluez-devel] BGB204 Can't init device hci0: Connection timed out (110) device_driver
2006-10-18 17:20 ` Marcel Holtmann
2006-10-23  3:29   ` [Bluez-devel] BGB204 Can't init d evice " device_driver
2006-11-06  8:35     ` device_driver [this message]
2006-11-06 15:02       ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=454EF3C0.000191.16073@bj126app52.126.com \
    --to=device_driver@126.com \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox