Re: [Bluez-users] Is this list dead? Here is my problem...

[Xamindar <junkxamindar@gmail.com>]

Michael Mauch wrote:
> Xamindar wrote:
>
>   
>> John H. wrote:
>>     
>>> Yes, it looks as though you do.  Can you do a regular rfcomm connect?
>>> What if you use rfcomm1?
>>>   
>>>       
>> What is a regular rfcomm connect?  On the console it just gives me errors.
>>
>> white-rabbit xamindar # rfcomm
>> rfcomm1: 00:12:56:5A:92:59 channel 8 clean
>> white-rabbit xamindar # rfcomm connect 1
>> Can't create RFCOMM TTY: Address already in use
>> white-rabbit xamindar #
>>     
>
> You don't want to use "rfcomm connect". You already bound channel 8 on
> your phone to /dev/rfcomm1 (probably in rfcomm.conf). That means that
> rfcommd is waiting for a program that uses /dev/rfcomm1 like a serial
> device.
>
> Just use /dev/rfcomm1 with minicom and try sending some "AT" commands to
> your phone, like "ATI", "ATI1" and so on.
>
> In case you're not familiar with minicom: start "minicom -s rfcomm1" and
> change the "Serial port setup" -> "Serial Device" to /dev/rfcomm1.
> "Save setup as rfcomm1" and "exit from Minicom".
>
> Now start "minicom rfcomm1". If your phone is too slow answering
> bluetooth connection and minicom says "cannot open /dev/rfcomm1", just
> try it again and again a few times.
>
> If that works, use wvdial, kppp, gkdial or networkmanager to connect
> using /dev/rfcomm1 (instead of /dev/modem, /dev/ttyS0).
>
> Regards...
> 		Michael
>
>   
Hey thanks!  That has helped me out a lot.  It seems it works.  I guess
maybe "Gnome ppp" is too stupid to be able to use rfcomm.  Here is the
results of minicom:


Welcome to minicom 2.2

OPTIONS: I18n
Compiled on Feb  9 2007, 18:15:58.
Port /dev/rfcomm0

                 Press CTRL-A Z for help on special keys     
                                                             
AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0                             
OK                                                           
ATI                                                          
Manufacturer: LG ELECTRONICS
Model: 226
Revision: CU500-MSM32701001-V10c-Aug-03-2006-CW-US  1  [Aug 03 2006
13:00:00]
IMEI: 010851007552410
+GCAP: +CGSM,+DS,+ES

OK

RING

RING

RING

RING

I think the "RING" happens when someone calls my phone, interesting.
Gnome ppp still refuses to use the device though.  I will install kppp
and try that as it is the one that worked on my friends computer.  Gnome
ppp reports the following when trying to connect or dial:

--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.56
--> Cannot open /dev/rfcomm0: Device or resource busy
--> Cannot open /dev/rfcomm0: Device or resource busy
--> Cannot open /dev/rfcomm0: Device or resource busy

> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>   


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users