Re: [Bluez-users] connection problem between samsung mobilephone nad bluez 3.8in slackware 11

["Mirosław Malach" <m.malach@wp.pl>]

Hi Marcel

Dnia 13-02-2007 o godz. 17:29 Marcel Holtmann napisa=B3(a):
> Hi Miroslaw,
> =

> > I have problem with connection between my usb bluetooth and =

> > samsung sgh -x680. I have installed slackware 11 with bluez 3.8 (lib =

> and utils). for essy diagnostic I sending for you output same commands =

> > and comments =

> >  =

> > lsusb :
> > =

> > Bus 2 Device 2: ID 1131:1001 Integrated System Solution Corp. KY-BT100 =

> Bluetooth Adapter
> > =

> > hciconfig -a =

> > =

> > hci0:   Type: USB
> >         BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
> >         UP RUNNING PSCAN
> >         RX bytes:7001 acl:10 sco:0 events:265 errors:0
> >         TX bytes:1665 acl:10 sco:0 commands:110 errors:0
> >         Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
> >         Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> >         Link policy: RSWITCH HOLD SNIFF PARK
> >         Link mode: MASTER
> >         Name: 'BlueZ (0)'
> >         Class: 0x3e0100
> >         Service Classes: Networking, Rendering, Capturing, Object =

> Transfer, Audio
> >         Device Class: Computer, Uncategorized
> >         HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP =

> Subver: 0x1fe
> >         Manufacturer: Integrated System Solution Corp. (57)
> > hcitool scan
> > Scanning ...
> > =

> >         00:17:D5:47:4E:88       Mir
> > =

> > hcid and spdp demon I have started by rc.bluetooth script from /etc/rc.d
> > =

> > my mobile phone hasn't seen my usb bluetooth =

> > When I have tried connect to my phone I haven't got any error  but =

> this link hasn't work . =

> > command l2ping to phone work very well.
> > =

> > hcitool con
> > Connections:
> > =

> > =

> > =

> > I see my phon by kbluetooth but
> > when I try connect by kbluetoothd -> "OBEX file transfer" (hcidump =

> work in beckground) my phone askin my about pin. I write pin from my =

> hcid.conf section passkey "1111"; and security auto but connection =

> broken becous I see on my phone "pin invaide"
> > =

> > output hcidump -X -V
> > > HCI Event: Number of Completed Packets (0x13) plen 5
> >     handle 1 packets 1
> > > HCI Event: PIN Code Request (0x16) plen 6
> >     bdaddr 00:17:D5:47:4E:88
> > < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
> >     bdaddr 00:17:D5:47:4E:88
> > > HCI Event: Command Complete (0x0e) plen 10
> >     PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
> >     status 0x00 bdaddr 00:17:D5:47:4E:88
> > > HCI Event: Auth Complete (0x06) plen 3
> >     status 0x06 handle 1
> >     Error: PIN or Key Missing
> > =

> > =

> > Could you tell me where is problem ?
> =

> you might wanna check the syslog. My guess is that you don't have a
> passkey agent running.
> =

> Regards
> =

> Marcel

I solved my problem by installation patch from side
http://www.kmobiletools.org/node/228

regards
Mirek

----------------------------------------------------
Ci=B1gnij 4 kana=B3y - zasmakuj w telewizji internetowej - Kliknij:
http://klik.wp.pl/?adr=3Dwww.wptv.wp.pl&sid=3D1015



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users