Unable to pair with Genius Navigator 900 Pro mouse

Unable to pair with Genius Navigator 900 Pro mouse

[Jaroslav Skarvada]

Hi,

hopefully this is the right list (please don't blame me if not :)

It seems it is no more possible to pair with Genius Navigator 900
Pro mouse. It seems it's older mouse probably with no SSP/
built-in PIN.

# bluetoothctl
[bluetooth]# pair ADDR
[CHG] Device ADDR Connected: yes
[CHG] Device ADDR Connected: no
[CHG] Device ADDR Connected: yes
Failed to pair: org.bluez.Error.AuthenticationRejected
[CHG] Device ADDR Connected: no

Hcitool "trick":
# hcitool cc ADDR;hcitool auth ADDR
HCI authentication request failed: Input/output error

The above error is shown before the PIN dialog appears. I also
tried Blueman GUI, but it tracebacks (report also sent).

Moreover:
# hciconfig hci0 sspmode 0
Can't set Simple Pairing mode on hci0: Input/output error (5)

So I cannot try without SSP. It seems there is nothing related
in dmesg.

IIRC the mouse worked in the past.

$ uname -r
4.5.7-200.fc23.x86_64

OS: Fedora 23
userspace: bluez-5.39

machine: Lenovo ThinkPad X240
adapter probably: Intel Centrino 7260 2 x 2 AC+ BT 4.0
module: btintel: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq

Could you advice some other tricks how to get it working? 
I could also bisect the problem later

thanks & regards

Jaroslav

Re: Unable to pair with Genius Navigator 900 Pro mouse

[Jaroslav Skarvada]

----- Original Message -----
> Hi,
> 
> hopefully this is the right list (please don't blame me if not :)
> 
> It seems it is no more possible to pair with Genius Navigator 900
> Pro mouse. It seems it's older mouse probably with no SSP/
> built-in PIN.
> 
> # bluetoothctl
> [bluetooth]# pair ADDR
> [CHG] Device ADDR Connected: yes
> [CHG] Device ADDR Connected: no
> [CHG] Device ADDR Connected: yes
> Failed to pair: org.bluez.Error.AuthenticationRejected
> [CHG] Device ADDR Connected: no
> 
> Hcitool "trick":
> # hcitool cc ADDR;hcitool auth ADDR
> HCI authentication request failed: Input/output error
> 
> The above error is shown before the PIN dialog appears. I also
> tried Blueman GUI, but it tracebacks (report also sent).
> 
> Moreover:
> # hciconfig hci0 sspmode 0
> Can't set Simple Pairing mode on hci0: Input/output error (5)
> 
> So I cannot try without SSP. It seems there is nothing related
> in dmesg.
> 
> IIRC the mouse worked in the past.
> 
> $ uname -r
> 4.5.7-200.fc23.x86_64
> 
> OS: Fedora 23
> userspace: bluez-5.39
> 
> machine: Lenovo ThinkPad X240
> adapter probably: Intel Centrino 7260 2 x 2 AC+ BT 4.0
> module: btintel: Intel Bluetooth firmware file:
> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
> 
> Could you advice some other tricks how to get it working?
> I could also bisect the problem later
> 
> thanks & regards
> 
> Jaroslav
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

I wasn't right, the mouse seems to support autopairing and I paired it
without problem under RHEL-7 and it also works there without problem.
I tried to shuffle user-space bluez and there is no change, so it has to be
kernel. I also tried with CSR USB dongle. Regarding the sspmode error,
it's probably not supported by the HW. To sum it up:

kernel-3.10.0-229.el7.x86_64 - it works
kernel-4.5.7-200.fc23.x86_64 - it doesn't work

I am going to bisect with vanilla kernel

thanks & regards

Jaroslav

Re: Unable to pair with Genius Navigator 900 Pro mouse

[Luiz Augusto von Dentz]

Hi Jaroslav,

On Wed, Jun 22, 2016 at 12:42 PM, Jaroslav Skarvada <jskarvad@redhat.com> wrote:
>
>
> ----- Original Message -----
>> Hi,
>>
>> hopefully this is the right list (please don't blame me if not :)
>>
>> It seems it is no more possible to pair with Genius Navigator 900
>> Pro mouse. It seems it's older mouse probably with no SSP/
>> built-in PIN.
>>
>> # bluetoothctl
>> [bluetooth]# pair ADDR
>> [CHG] Device ADDR Connected: yes
>> [CHG] Device ADDR Connected: no
>> [CHG] Device ADDR Connected: yes
>> Failed to pair: org.bluez.Error.AuthenticationRejected
>> [CHG] Device ADDR Connected: no
>>
>> Hcitool "trick":
>> # hcitool cc ADDR;hcitool auth ADDR
>> HCI authentication request failed: Input/output error
>>
>> The above error is shown before the PIN dialog appears. I also
>> tried Blueman GUI, but it tracebacks (report also sent).
>>
>> Moreover:
>> # hciconfig hci0 sspmode 0
>> Can't set Simple Pairing mode on hci0: Input/output error (5)
>>
>> So I cannot try without SSP. It seems there is nothing related
>> in dmesg.
>>
>> IIRC the mouse worked in the past.
>>
>> $ uname -r
>> 4.5.7-200.fc23.x86_64
>>
>> OS: Fedora 23
>> userspace: bluez-5.39
>>
>> machine: Lenovo ThinkPad X240
>> adapter probably: Intel Centrino 7260 2 x 2 AC+ BT 4.0
>> module: btintel: Intel Bluetooth firmware file:
>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
>>
>> Could you advice some other tricks how to get it working?
>> I could also bisect the problem later
>>
>> thanks & regards
>>
>> Jaroslav
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
> I wasn't right, the mouse seems to support autopairing and I paired it
> without problem under RHEL-7 and it also works there without problem.
> I tried to shuffle user-space bluez and there is no change, so it has to be
> kernel. I also tried with CSR USB dongle. Regarding the sspmode error,
> it's probably not supported by the HW. To sum it up:
>
> kernel-3.10.0-229.el7.x86_64 - it works
> kernel-4.5.7-200.fc23.x86_64 - it doesn't work

Try collecting the HCI trace with btmon, btw make sure you have an
agent registered and set as default.

> I am going to bisect with vanilla kernel
>
> thanks & regards
>
> Jaroslav
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Luiz Augusto von Dentz

Re: Unable to pair with Genius Navigator 900 Pro mouse

[Jaroslav Skarvada]

----- Original Message -----
> Hi Jaroslav,
> 
> On Wed, Jun 22, 2016 at 12:42 PM, Jaroslav Skarvada <jskarvad@redhat.com>
> wrote:
> >
> >
> > ----- Original Message -----
> >> Hi,
> >>
> >> hopefully this is the right list (please don't blame me if not :)
> >>
> >> It seems it is no more possible to pair with Genius Navigator 900
> >> Pro mouse. It seems it's older mouse probably with no SSP/
> >> built-in PIN.
> >>
> >> # bluetoothctl
> >> [bluetooth]# pair ADDR
> >> [CHG] Device ADDR Connected: yes
> >> [CHG] Device ADDR Connected: no
> >> [CHG] Device ADDR Connected: yes
> >> Failed to pair: org.bluez.Error.AuthenticationRejected
> >> [CHG] Device ADDR Connected: no
> >>
> >> Hcitool "trick":
> >> # hcitool cc ADDR;hcitool auth ADDR
> >> HCI authentication request failed: Input/output error
> >>
> >> The above error is shown before the PIN dialog appears. I also
> >> tried Blueman GUI, but it tracebacks (report also sent).
> >>
> >> Moreover:
> >> # hciconfig hci0 sspmode 0
> >> Can't set Simple Pairing mode on hci0: Input/output error (5)
> >>
> >> So I cannot try without SSP. It seems there is nothing related
> >> in dmesg.
> >>
> >> IIRC the mouse worked in the past.
> >>
> >> $ uname -r
> >> 4.5.7-200.fc23.x86_64
> >>
> >> OS: Fedora 23
> >> userspace: bluez-5.39
> >>
> >> machine: Lenovo ThinkPad X240
> >> adapter probably: Intel Centrino 7260 2 x 2 AC+ BT 4.0
> >> module: btintel: Intel Bluetooth firmware file:
> >> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
> >>
> >> Could you advice some other tricks how to get it working?
> >> I could also bisect the problem later
> >>
> >> thanks & regards
> >>
> >> Jaroslav
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
> >> in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >>
> >
> > I wasn't right, the mouse seems to support autopairing and I paired it
> > without problem under RHEL-7 and it also works there without problem.
> > I tried to shuffle user-space bluez and there is no change, so it has to be
> > kernel. I also tried with CSR USB dongle. Regarding the sspmode error,
> > it's probably not supported by the HW. To sum it up:
> >
> > kernel-3.10.0-229.el7.x86_64 - it works
> > kernel-4.5.7-200.fc23.x86_64 - it doesn't work
> 
> Try collecting the HCI trace with btmon, btw make sure you have an
> agent registered and set as default.
> 
> > I am going to bisect with vanilla kernel
> >
> > thanks & regards
> >
> > Jaroslav
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
> > in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 
> --
> Luiz Augusto von Dentz
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Thanks for reply, I created:

https://bugzilla.kernel.org/show_bug.cgi?id=121221

and attached all information there including the trace. Please let me know,
whether more information is needed

thanks & regards

Jaroslav