I actually set the packet-types to "ALL SCO" and let stack do its magic work according to your suggestions, but in reality it turned out to use HV3 which makes sense as that imply (AFAIK) that 2/3 of the bandwidth is used for the two SCO connections, leaving 1/3 left for the 3 RF_COMM connections. /Markus Mayank BATRA skrev: >> For what it's worth; >> > > >> After having cross-compiled to my embedded system and leaving the >> > USB-dongle solution behind, everything now works like a breeze and I now > have a BT device hosting running 2 SCO connections and 3 RF_COMM sockets > simultaneously. > > And what packet types are these two SCO connectionis using now? > > -Mayank > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Bluez-devel mailing list > Bluez-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-devel > -- ------------------------------------------------------------------------ *Markus Adolfsson* M.Sc.CE. Product Development Mail: markus.adolfsson@free2move.net Phone: +46 35 152268 Mobile: +46 707 165296 *Free2move AB* -- /WIRELESS MADE EASY/ Phone: +46 35 152260 Fax: +46 35 152269 Web: www.free2move.net Address: Sperlingsgatan 7 SE-30248 Halmstad Sweden