From: Chris Carlin <carlin@jlab.org>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] RE : Plugz, a2dpd, and a2dpd2 strangeness
Date: Fri, 27 Apr 2007 10:37:58 -0400 [thread overview]
Message-ID: <46320AC6.9080200@jlab.org> (raw)
In-Reply-To: <CE5216C10C83944D9FD37B65CD33F3970CF4CD@mplex01.mpl.access-company.com>
carlin1 ~ # a2dpd -g
A2DPD[10:29:49.541]: init_ipc: Selected IPC: unix, addr=127.0.0.1,
bcst=127.0.0.255, port=21453
A2DPD[10:29:49.541]: make_daemon_process: a2dpd [Apr 26 2007 17:07:32]
starting ...
A2DPD[10:29:49.541]: main: (errno=9:Bad file descriptor)a2dpd
addr=00:0D:E8:01:BB:A3 timer=999 us [Apr 26 2007 17:07:37]
A2DPD[10:29:49.541]: a2dpd_signal_init: Getting on DBUS
A2DPD[10:29:49.542]: a2dpd_signal_init: Installing watch
A2DPD[10:29:49.542]: add_dbus_watch: Added watch 0 0x809b8b8 disabled
A2DPD[10:29:49.542]: add_dbus_watch: Added watch 1 0x809b8e0 enabled
A2DPD[10:29:49.542]: a2dpd_signal_init: Registering object path:
/com/access/a2dpd
A2DPD[10:29:49.542]: a2dpd_signal_init: Acquiring service: com.access.a2dpd
A2DPD[10:29:49.542]: a2dpd_signal_init: OK
A2DPD[10:29:49.542]: a2dpd_signal_init: OK
A2DPD[10:29:49.542]: a2dpd_register_sdp: OK
A2DPD[10:29:49.542]: add_avrtg:
A2DPD[10:29:49.542]: add_a2source:
A2DPD[10:29:49.542]: main_loop:
A2DPD[10:29:49.542]: make_server_socket:
A2DPD[10:29:49.542]: bta2dpdevicenew:
A2DPD[10:29:49.542]: a2dpd_signal_address_changed: 00:0D:E8:01:BB:A3
A2DPD[10:29:49.543]: a2dpd_signal_set_socket: Signal socket set to 7
A2DPD[10:29:49.543]: a2dpd_signal_state: Disconnected
A2DPD[10:29:49.543]: a2dp_alloc:
A2DPD[10:29:49.543]: a2dp_alloc: (a2dp = 0x80a9290)
A2DPD[10:29:49.543]: a2dp_new: 00:0D:E8:01:BB:A3, 32000
A2DPD[10:29:49.543]: a2dp_new: State AVDTP_STATE_DISCONNECTED
A2DPD[10:29:49.543]: alsa_new:
A2DPD[10:29:49.543]: alsa_new: device=plughw:0,0, framerate=32000
A2DPD[10:29:49.543]: alsa_new: State ALSA_STATE_DISCONNECTED
A2DPD[10:29:49.543]: alsa_new: returning 0x80ab418
A2DPD[10:29:49.543]: sco_new:
A2DPD[10:29:49.543]: sco_new: State SCO_STATE_DISCONNECTED
A2DPD[10:29:49.543]: sco_state_disconnect: Filtering state : already
disconnected
A2DPD[10:29:49.543]: main_loop: Bluetooth Device Settings [32000 hz, 2
channels, 16 bits]
A2DPD[10:29:49.544]: avrcp_new: Listening for AVRCP on socket 9
A2DPD[10:29:49.544]: avrcp_new: 0x80ab528
***hit play***
A2DPD[10:29:53.502]: pollfd_cb_sockfd: Client 10 got index 0
A2DPD[10:29:53.502]: stream_client_state_streamingsetup: PLAYBACK thread
client_index=0, socket=10, id=0 started (44100 Hz, 2 channels, 16 bits)
A2DPD[10:29:53.503]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[10:29:53.503]: a2dp_state_machine: Role is INITIATOR
A2DPD[10:29:53.503]: a2dp_state_machine: (errno=115:Operation now in
progress)SDP connection on socket 11
A2DPD[10:29:53.503]: a2dp_state_machine: State
AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[10:29:53.503]: a2dpd_signal_state: Connecting 00:0D:E8:01:BB:A3
A2DPD[10:29:56.722]: a2dp_state_machine: SDP connection terminated
A2DPD[10:29:56.744]: get_avdtp_psm: Parsing results
A2DPD[10:29:56.744]: get_avdtp_psm: Record
A2DPD[10:29:56.744]: get_avdtp_psm: Service Search OK
A2DPD[10:29:56.761]: get_avdtp_psm: Checking non spec audio
A2DPD[10:29:56.761]: a2dp_state_machine: Found psm 25
A2DPD[10:29:56.761]: a2dp_state_machine: State AVDTP_STATEX_CTL_CONNECTING
A2DPD[10:29:56.761]: a2dp_state_machine: Socket is 11
A2DPD[10:29:56.761]: a2dp_state_machine: (errno=115:Operation now in
progress)State AVDTP_STATEX_CTL_CONNECTING_WAIT
A2DPD[10:29:56.784]: a2dp_state_machine: State AVDTP_STATE_IDLE
A2DPD[10:29:56.785]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING
A2DPD[10:29:56.786]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING_RESP
A2DPD[10:29:56.800]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_DISCOVER)
A2DPD[10:29:56.800]: a2dp_state_machine: AVDTP_DISCOVER success
A2DPD[10:29:56.800]: a2dp_state_machine: State
AVDTP_STATEX_GETTING_CAPABILITIES
A2DPD[10:29:56.801]: a2dp_state_machine: Getting capabilities for SEID=1
A2DPD[10:29:56.801]: a2dp_state_machine: State
AVDTP_STATEX_GETTING_CAPABILITIES_RESP
A2DPD[10:29:56.812]: get_socket_omtu: Socket 9 imtu=672, omtu=0,
flush_to=65535
A2DPD[10:29:56.812]: pollfd_cb_avrcpfd: socket 12: Connection from
A3:BB:01:E8:0D:00, mtu=610 accepted at index 0
A2DPD[10:29:56.814]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_GET_CAPABILITIES)
A2DPD[10:29:56.814]: a2dp_state_machine: AVDTP_GET_CAPABILITIES success
for seid 1
A2DPD[10:29:56.814]: a2dp_state_machine: servcap_cap=1, servcap_len=0,
A2DPD[10:29:56.814]: a2dp_state_machine: cap_type=7, length=6
A2DPD[10:29:56.814]: a2dp_state_machine: media_type=0, codec=0
A2DPD[10:29:56.814]: a2dp_state_machine: A2DPD Prefered bitpool 32
A2DPD[10:29:56.814]: a2dp_state_machine: Device Prefered bitpool 2 -> 250
A2DPD[10:29:56.814]: a2dp_state_machine: A2DPD Selected bitpool 32
A2DPD[10:29:56.814]: a2dp_state_machine: State
AVDTP_STATEX_SETTING_CONFIGURATION
A2DPD[10:29:56.815]: a2dp_state_machine: State
AVDTP_STATEX_SETTING_CONFIGURATION_RESP
A2DPD[10:29:56.834]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_SET_CONFIGURATION)
A2DPD[10:29:56.834]: a2dp_state_machine: AVDTP_SET_CONFIGURATION success
A2DPD[10:29:56.834]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING
A2DPD[10:29:56.835]: a2dp_state_machine: State
AVDTP_STATEX_STREAM_OPENING_RESP
A2DPD[10:29:56.851]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_OPEN)
A2DPD[10:29:56.851]: a2dp_state_machine: AVDTP_OPEN success
A2DPD[10:29:56.851]: a2dp_state_machine: State AVDTP_STATE_CONFIGURED
A2DPD[10:29:56.852]: a2dp_state_machine: State
AVDTP_STATEX_STREAM_CONNECTING
A2DPD[10:29:56.853]: a2dp_state_machine: Socket is 13
A2DPD[10:29:56.853]: a2dp_state_machine: (errno=115:Operation now in
progress)State AVDTP_STATEX_STREAM_CONNECTING_WAIT
A2DPD[10:29:56.884]: a2dp_state_machine: Stream connected
A2DPD[10:29:56.884]: get_socket_omtu: Socket 13 imtu=672, omtu=678,
flush_to=65535
A2DPD[10:29:56.884]: a2dp_state_machine: State
AVDTP_STATE_OPEN_START_STREAMING
A2DPD[10:29:56.885]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING
A2DPD[10:29:56.885]: a2dpd_signal_state: Connected 00:0D:E8:01:BB:A3
A2DPD[10:29:56.886]: a2dp_state_machine: State
AVDTP_STATEX_STREAM_STARTING_WAIT
A2DPD[10:29:56.900]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_START)
A2DPD[10:29:56.900]: a2dp_state_machine: AVDTP_START success
A2DPD[10:29:56.900]: a2dp_state_machine: State AVDTP_STATE_STREAMING
***ogg123 says it's playing; no sound except for occasional chirps; no
new messages from a2dpd***
***hit stop***
A2DPD[10:30:22.184]: pollfd_cb_clients: Client 0: Error detected (err=0,
toc=0, err=0, hup=1)
> What headset/adapter is it? Did you start hcidump before a2dpd?
Headset is Creative CB2530. I've had identical results from four
different adapters including both Broadcom and CSR chipsets, currently
using a DLink DBT-120.
Started hcidump before.
~Chris
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2007-04-27 14:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-27 1:28 [Bluez-devel] Plugz, a2dpd, and a2dpd2 strangeness Chris Carlin
2007-04-27 4:03 ` Brad Midgley
2007-04-27 6:18 ` [Bluez-devel] RE : " Frederic Dalleau
2007-04-27 14:37 ` Chris Carlin [this message]
2007-04-27 15:57 ` Frederic Dalleau
2007-04-27 18:49 ` Chris Carlin
2007-04-27 14:26 ` [Bluez-devel] " Chris Carlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46320AC6.9080200@jlab.org \
--to=carlin@jlab.org \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).