* [Bluez-devel] Revive Dead Dongle
@ 2007-05-16 0:18 Andreas Böhler
2007-05-17 14:55 ` Martin Karger
0 siblings, 1 reply; 4+ messages in thread
From: Andreas Böhler @ 2007-05-16 0:18 UTC (permalink / raw)
To: bluez-devel
Hey, =
I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
Unfortunately, the upgrade seems to have failed: The D-Link's light
don't light up anymore and no USB-device is detected when plugging
in the device.
Is there a known way to force the Dongle to boot into DFU-Mode? Or
is it hopelessly flashed to death?
Thanks, =
greetings, =
andy
-- =
Andreas B=F6hler
andy (dot) boehler (at) gmx (dot) at
http://klasseonline.dyndns.org
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Revive Dead Dongle
2007-05-16 0:18 [Bluez-devel] Revive Dead Dongle Andreas Böhler
@ 2007-05-17 14:55 ` Martin Karger
2007-06-11 16:36 ` Martin Karger
2007-06-12 22:11 ` Martin Karger
0 siblings, 2 replies; 4+ messages in thread
From: Martin Karger @ 2007-05-17 14:55 UTC (permalink / raw)
To: BlueZ development
Andreas B=F6hler wrote:
> Hey, =
> =
> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
> Unfortunately, the upgrade seems to have failed: The D-Link's light
> don't light up anymore and no USB-device is detected when plugging
> in the device.
> =
> Is there a known way to force the Dongle to boot into DFU-Mode? Or
> is it hopelessly flashed to death?
if it has spi you might be able to reflash. but i never tried that.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Revive Dead Dongle
2007-05-17 14:55 ` Martin Karger
@ 2007-06-11 16:36 ` Martin Karger
2007-06-12 22:11 ` Martin Karger
1 sibling, 0 replies; 4+ messages in thread
From: Martin Karger @ 2007-06-11 16:36 UTC (permalink / raw)
To: BlueZ development
Martin Karger wrote:
> Andreas B=F6hler wrote:
>> Hey, =
>>
>> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
>> Unfortunately, the upgrade seems to have failed: The D-Link's light
>> don't light up anymore and no USB-device is detected when plugging
>> in the device.
>>
>> Is there a known way to force the Dongle to boot into DFU-Mode? Or
>> is it hopelessly flashed to death?
> =
> if it has spi you might be able to reflash. but i never tried that.
short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Revive Dead Dongle
2007-05-17 14:55 ` Martin Karger
2007-06-11 16:36 ` Martin Karger
@ 2007-06-12 22:11 ` Martin Karger
1 sibling, 0 replies; 4+ messages in thread
From: Martin Karger @ 2007-06-12 22:11 UTC (permalink / raw)
To: BlueZ development
Martin Karger wrote:
> Andreas B=F6hler wrote:
>> Hey, =
>>
>> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
>> Unfortunately, the upgrade seems to have failed: The D-Link's light
>> don't light up anymore and no USB-device is detected when plugging
>> in the device.
>>
>> Is there a known way to force the Dongle to boot into DFU-Mode? Or
>> is it hopelessly flashed to death?
> =
> if it has spi you might be able to reflash. but i never tried that.
short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-06-12 22:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-16 0:18 [Bluez-devel] Revive Dead Dongle Andreas Böhler
2007-05-17 14:55 ` Martin Karger
2007-06-11 16:36 ` Martin Karger
2007-06-12 22:11 ` Martin Karger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).