linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Feig <feig@nnytech.net>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: [Bluez-devel]  Frequent headset disconnects
Date: Thu, 17 May 2007 11:34:46 -0400	[thread overview]
Message-ID: <464C7616.9070900@nnytech.net> (raw)
In-Reply-To: <200705171521.38889.bluez-devel@huitl.de>

Hello,
I've been using the a2dpd app for a couple of weeks now, and really like 
it. I have a few issues though, with the main one being that after a 
couple of minutes of playback, my headphones (HT820) turn off, I turn 
them back on, and playback continues. I use these things long periods of 
time with my iPod and a Jabra a2dp adapter, I can listen for hours on an 
a2dp connection with those without interruption (aside from the 
occasional phone call). But within a couple of minutes using the a2dpd 
app (and amarok or mplayer), the connection gets really choppy, then 
drops out, and I have to turn _on_ my headphones. As you might guess, 
this is a show stopper for me, as I can't really enjoy listening to 
music wirelessly if I can't get through an entire song without turning 
my headphones back on.

Any ideas on why this is happening would be helpful, as right now, I 
don't even know where to start looking. Here's the output when it fails:

A2DPD[11:10:02.275]: a2dp_transfer_raw: Wrote -1 not 603 bytes (sbc.len=118)
A2DPD[11:10:02.275]: transfer_outgoing_packets: Error in transfer 
(transfer=-1)
A2DPD[11:10:02.275]: a2dp_state_disconnect: State 
AVDTP_STATEX_STREAM_CLOSING
A2DPD[11:10:02.275]: a2dp_state_machine: State 
AVDTP_STATEX_STREAM_CLOSING_WAIT
A2DPD[11:10:02.275]: a2dpd_signal_state: Connecting 00:07:A4:B8:68:8F
A2DPD[11:10:05.005]: a2dp_state_machine: Too many answer for AVDTP_CLOSE
A2DPD[11:10:05.005]: a2dp_state_machine: State AVDTP_STATEX_DISCONNECTING
A2DPD[11:10:05.005]: a2dp_disconnect:
A2DPD[11:10:05.005]: a2dp_stream_stop: Closing stream socket 12
A2DPD[11:10:05.005]: a2dp_stream_stop: Closed
A2DPD[11:10:05.005]: a2dp_stream_stop: State AVDTP_STATE_IDLE
A2DPD[11:10:05.005]: a2dp_disconnect: Closing ctl socket 10
A2DPD[11:10:05.005]: a2dp_disconnect: Closed
A2DPD[11:10:05.005]: a2dp_disconnect: State AVDTP_STATE_DISCONNECTED
A2DPD[11:10:05.005]: a2dpd_signal_state: Disconnected
A2DPD[11:10:05.005]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[11:10:05.005]: a2dp_state_machine: Role is INITIATOR
A2DPD[11:10:05.005]: a2dp_state_machine: SDP connection on socket 10
A2DPD[11:10:05.005]: a2dp_state_machine: State 
AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[11:10:05.005]: a2dpd_signal_state: Connecting 00:07:A4:B8:68:8F
A2DPD[11:10:11.515]: a2dp_state_machine: SDP connection terminated
A2DPD[11:10:11.515]: a2dp_state_machine: (errno=110:Connection timed 
out)SDP connection failed
A2DPD[11:10:11.515]: a2dp_state_machine: State AVDTP_STATEX_DISCONNECTING
A2DPD[11:10:11.515]: a2dp_disconnect:
A2DPD[11:10:11.516]: a2dp_stream_stop: Closing stream socket -1
A2DPD[11:10:11.516]: a2dp_stream_stop: Closed
A2DPD[11:10:11.516]: a2dp_stream_stop: State AVDTP_STATE_IDLE
A2DPD[11:10:11.516]: a2dp_disconnect: Closing ctl socket -1
A2DPD[11:10:11.516]: a2dp_disconnect: Closed
A2DPD[11:10:11.516]: a2dp_disconnect: State AVDTP_STATE_DISCONNECTED
A2DPD[11:10:11.516]: a2dpd_signal_state: Disconnected
A2DPD[11:10:11.523]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[11:10:11.524]: a2dp_state_machine: Role is INITIATOR
A2DPD[11:10:11.524]: a2dp_state_machine: SDP connection on socket 10
A2DPD[11:10:11.524]: a2dp_state_machine: State 
AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[11:10:11.524]: a2dpd_signal_state: Connecting 00:07:A4:B8:68:8F

Thank you, I appreciate your help,
John

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2007-05-17 15:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-17  0:07 [Bluez-devel] headsetd has problems serving two applications at a time Robert Huitl
2007-05-17  3:42 ` Brad Midgley
2007-05-17  7:51   ` Tim Chick
2007-05-17 13:21   ` Robert Huitl
2007-05-17 15:34     ` John Feig [this message]
2007-05-18 13:13       ` [Bluez-devel] Frequent headset disconnects Brad Midgley
2007-05-18 15:56         ` John Feig
2007-05-18 19:17           ` [Bluez-devel] RE : " Frederic Dalleau
2007-05-22 14:31             ` John Feig
2007-05-22 17:51               ` John Feig
2007-05-24 13:24     ` [Bluez-devel] headsetd has problems serving two applications at a time Brad Midgley
2007-05-24 16:28       ` Marc-André Lureau
2007-05-24 18:45       ` Robert Huitl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=464C7616.9070900@nnytech.net \
    --to=feig@nnytech.net \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).