* [Bluez-devel] Revive Dead Dongle @ 2007-05-16 0:18 Andreas Böhler 2007-05-17 14:55 ` Martin Karger 0 siblings, 1 reply; 4+ messages in thread From: Andreas Böhler @ 2007-05-16 0:18 UTC (permalink / raw) To: bluez-devel Hey, = I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. Unfortunately, the upgrade seems to have failed: The D-Link's light don't light up anymore and no USB-device is detected when plugging in the device. Is there a known way to force the Dongle to boot into DFU-Mode? Or is it hopelessly flashed to death? Thanks, = greetings, = andy -- = Andreas B=F6hler andy (dot) boehler (at) gmx (dot) at http://klasseonline.dyndns.org ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Revive Dead Dongle 2007-05-16 0:18 [Bluez-devel] Revive Dead Dongle Andreas Böhler @ 2007-05-17 14:55 ` Martin Karger 2007-06-11 16:36 ` Martin Karger 2007-06-12 22:11 ` Martin Karger 0 siblings, 2 replies; 4+ messages in thread From: Martin Karger @ 2007-05-17 14:55 UTC (permalink / raw) To: BlueZ development Andreas B=F6hler wrote: > Hey, = > = > I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. > Unfortunately, the upgrade seems to have failed: The D-Link's light > don't light up anymore and no USB-device is detected when plugging > in the device. > = > Is there a known way to force the Dongle to boot into DFU-Mode? Or > is it hopelessly flashed to death? if it has spi you might be able to reflash. but i never tried that. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Revive Dead Dongle 2007-05-17 14:55 ` Martin Karger @ 2007-06-11 16:36 ` Martin Karger 2007-06-12 22:11 ` Martin Karger 1 sibling, 0 replies; 4+ messages in thread From: Martin Karger @ 2007-06-11 16:36 UTC (permalink / raw) To: BlueZ development Martin Karger wrote: > Andreas B=F6hler wrote: >> Hey, = >> >> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. >> Unfortunately, the upgrade seems to have failed: The D-Link's light >> don't light up anymore and no USB-device is detected when plugging >> in the device. >> >> Is there a known way to force the Dongle to boot into DFU-Mode? Or >> is it hopelessly flashed to death? > = > if it has spi you might be able to reflash. but i never tried that. short article on debricking you bt-dongle via spi: http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/ ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Revive Dead Dongle 2007-05-17 14:55 ` Martin Karger 2007-06-11 16:36 ` Martin Karger @ 2007-06-12 22:11 ` Martin Karger 1 sibling, 0 replies; 4+ messages in thread From: Martin Karger @ 2007-06-12 22:11 UTC (permalink / raw) To: BlueZ development Martin Karger wrote: > Andreas B=F6hler wrote: >> Hey, = >> >> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. >> Unfortunately, the upgrade seems to have failed: The D-Link's light >> don't light up anymore and no USB-device is detected when plugging >> in the device. >> >> Is there a known way to force the Dongle to boot into DFU-Mode? Or >> is it hopelessly flashed to death? > = > if it has spi you might be able to reflash. but i never tried that. short article on debricking you bt-dongle via spi: http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/ ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-06-12 22:11 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-05-16 0:18 [Bluez-devel] Revive Dead Dongle Andreas Böhler 2007-05-17 14:55 ` Martin Karger 2007-06-11 16:36 ` Martin Karger 2007-06-12 22:11 ` Martin Karger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).