From: Gunnar Thielebein <gunnar_thielebein@gmx.net>
To: Bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] audio bluetooth connectivity in gutsy
Date: Sun, 20 Jan 2008 14:04:23 +0100 [thread overview]
Message-ID: <479346D7.1080500@gmx.net> (raw)
In-Reply-To: <d89ddf300801192041o12e98ee7ybeeb28efb2fdfa1d@mail.gmail.com>
Heres my hcid.conf (comments stripped):
options {
autoinit yes;
security auto;
pairing multi;
passkey "0000"; # pw for headset pairing
}
device {
name "%h-%d";
class 0x000100;
iscan enable; pscan enable;
lm master;
lp rswitch,hold,sniff,park;
}
.asoundrc:
pcm.bluetooth {
type bluetooth
device 00:12:EE:18:95:CA
}
I had my other soundcard in use could that cause problems in some cases?
I want to use the sco part of bt-audio so the test with mplayer was only
for checking if it works in general.
later on I would like to use linphone with it.
This is output of hciconfig:
hci0: Type: USB
BD Address: 00:0B:0D:20:FE:15 ACL MTU: 339:4 SCO MTU: 0:0
UP RUNNING PSCAN
RX bytes:996 acl:0 sco:0 events:25 errors:0
TX bytes:596 acl:0 sco:0 commands:24 errors:0
Features: 0xff 0xff 0x3d 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: MASTER
Name: 'knallbuntu-0knallbuntu-0'
Class: 0x080104
Service Classes: Capturing
Device Class: Computer, Desktop workstation
HCI Ver: 1.1 (0x1) HCI Rev: 0x93 LMP Ver: 1.1 (0x1) LMP Subver: 0x93
Manufacturer: Transilica, Inc. (24)
hci0: Type: USB
BD Address: 00:0B:0D:20:FE:15 ACL MTU: 339:4 SCO MTU: 0:0
Unsupported manufacturer
Brad Midgley schrieb:
> Gunnar
>
> I'd be most suspect of the microtune dongle. It would tell us more if you ran:
>
> hciconfig -a;sudo hciconfig hci0 revision
>
> Brad
>
> On Jan 19, 2008 4:22 PM, Gunnar Thielebein <gunnar_thielebein@gmx.net> wrote:
>
>> Hi group,
>>
>> I am trying to connect my headset in gutsy with default kernel
>> 2.6.22-14-generic. I tried all four(?) possible solutions: old sco way,
>> plugz, bluetooth-alsa (at least the package in gutsy) and bluez-audio
>> which all ends finally with a hardlock of my system when the connection
>> was established with headset.
>>
>> Authentication and sdp browsing works fine at least in kde.
>>
>> I tested sound play with smplayer,mplayer,aplay,play.
>>
>> I also tested with the unstable packages from sid libbluez, bluez-
>> bluez-audio, gstreamer-plugins
>>
>> Could you tell if I need a more current kernel version than 22?
>> Or is it something with my hardware?
>>
>> my hardware spec:
>>
>> Headset: HBH-PV700
>> ---
>> Dongle: Bus 001 Device 003: ID 0f4d:1000 Microtune, Inc. Bluetooth Dongle
>> ---
>> arch: amd64 - 2.6.22-14-generic #1 SMP Tue Dec 18 05:28:27 UTC 2007
>> x86_64 GNU/Linux
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>
>
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2008-01-20 13:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-19 23:22 [Bluez-users] audio bluetooth connectivity in gutsy Gunnar Thielebein
2008-01-20 3:13 ` Eugene
2008-01-20 4:41 ` Brad Midgley
2008-01-20 12:54 ` Christophe-Marie Duquesne
2008-01-20 13:04 ` Gunnar Thielebein [this message]
2008-01-20 14:39 ` Brad Midgley
2008-01-21 13:50 ` Benito Torres
2008-01-21 18:19 ` Brad Midgley
2008-01-22 5:16 ` Johan Brannlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=479346D7.1080500@gmx.net \
--to=gunnar_thielebein@gmx.net \
--cc=Bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox