Hello,

I am working with BlueZ 3.22, kernel 2.6.24 on ARM and found 2 problems :

-  I am not able to pair with some phones (Nokia N70 and sony-ericsson 
P800). After some investigations, I found that a "L2CAP information 
request packet" is sent just after the ACL connection. Both phones reply 
with "command rejected" error, then disconnect the ACL link before BlueZ 
is able to finish the pairing (see attached traces).

- with some other phones (LG 990 Viewty and sony-ericsson T610), the 
kernel crashes after pairing initiated by the phone is completed.

For the first problem I removed the send of the "L2CAP information 
request packet" in the kernel (see attached patch). This fixes both 
problems.

I did not found any usage of the remote L2CAP information in kernel.
Is sending "L2CAP information request packet" mandatory for upper layer 
and/or qualification ?
Is my fix OK ?

Regards

Fred

-- 
-----------------------------------------------
It is not by improving the oil lamp that one invents the electric bulb!
-----------------------------------------------
Danis Frederic                   Access Company
Software engineer
Mail : mailto:frederic.danis@access-company.com
-----------------------------------------------