Re: Set Tmin and Tmax for inquiry?

[Ilya Rubtsov <lusyaru@gmail.com>]

Oops. Mistake. Right is: 'max 24 min 16 lap 0x9e8b33 len 8 num 0' 
(StartDiscovery) and 'max 16 min 10 lap 0x9e8b33 len 8 num 0' (hcitool)

Ilya Rubtsov пишет:

> Hi
>
> I'm developing an application for bluecasting. So period of periodic 
> inquire is important for me.
> AFAIK, inquire process takes 10.24 seconds (Bluetooth 2.0). But if I 
> use StartDiscovery method in python script, then I see this in hcidump:
>
> < HCI Command: Periodic Inquiry Mode (0x01|0x0003) plen 9
>   max 24 min 16 lap 0x9e8b33 len 8 num 0
>
> and I get "Inquiry Complete" event every ~24-30 second. But if I use 
> 'hcitool spinq', then I see:
>
> < HCI Command: Periodic Inquiry Mode (0x01|0x0003) plen 9
>   max 24 min 16 lap 0x9e8b33 len 8 num 0
>
> and "Inquiry Complete" event takes place every ~13-15 seconds. And in 
> both cases all remote devices is being founded, so I don't see any 
> reason for longer inquiring. AFAIK HCID internally sets Tmin and Tmax 
> parameters, but is there any way to affect to its 'decision'?
>
> P.S. Excuse me for my English :(