Re: bluetoothd not starting at boot with udev

[Mario Limonciello <mario_limonciello@dell.com>]

[-- Attachment #1.1: Type: text/plain, Size: 944 bytes --]

Hi Bastien

Bastien Nocera wrote:
> On Mon, 2009-07-13 at 18:07 -0500, Mario Limonciello wrote:
>   
>
> Which is why you need to retry the failed rules later on.
>   
OK, good to know that my suspicions were correct.
>   
>
> You need to call with the --retry-failed, after the basics of the system
> have been brought up. This means starting up D-Bus, mounting network
> filesystems, etc.
>   
Unfortunately, this makes no difference.  It appears that the previous
invocation of the rules is not registering as a failure.  If I remove my
extra trigger call on the bluetooth subsystem and run:

$ udevadm trigger --type=failed --verbose --dry-run
(or --retry-failed, they follow the same code path)

No devices are printed, and nothing happens.

Regards

-- 
Mario Limonciello
*Dell | Linux Engineering*
mario_limonciello@dell.com

-- 
Mario Limonciello
*Dell | Linux Engineering*
mario_limonciello@dell.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 261 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]