From: Peter Hurley <phurley@charter.net>
To: Johan Hedberg <johan.hedberg@nokia.com>,
linux-bluetooth <linux-bluetooth@vger.kernel.org>
Subject: Re: [4.48] SDP Discovery not reset on error
Date: Fri, 04 Sep 2009 13:49:49 -0400 [thread overview]
Message-ID: <4AA1533D.7090505@charter.net> (raw)
In-Reply-To: <20090904155536.GA5889@jh-x301>
Johan Hedberg wrote:
> Hi Peter,
>
> On Fri, Sep 04, 2009, Peter Hurley wrote:
>
>> I hadn't moved to 4.52 yet because I'm still trying to track down what I
>> think is a race condition in avdtp.
>>
>
> Actually that should be an even more important reason to move to 4.52
> since there's at least one AVDTP race condition fix there.
>
> Johan
>
>
Maybe. The race I'm observing may have something to do with your
auth_cb fix (tbh, I don't fully understand the sequence avdtp_confirm_cb
-> avdtp_connect_cb -> session_cb and how auth_cb fits in).
Here's the daemon log (notice the "Transport endpoint is not connected
(107)" errors):
Sep 4 07:30:04 dev-wkstn bluetoothd[2713]: link_key_request
(sba=00:07:61:A0:08:9B, dba=00:0D:FD:1E:99:30)
Sep 4 07:30:04 dev-wkstn bluetoothd[2713]: kernel auth requirements = 0x00
Sep 4 07:30:04 dev-wkstn bluetoothd[2713]: stored link key type = 0x00
Sep 4 07:30:04 dev-wkstn bluetoothd[2713]:
adapter_get_device(00:0D:FD:1E:99:30)
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]:
hcid_dbus_bonding_process_complete: status=00
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]:
adapter_get_device(00:0D:FD:1E:99:30)
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]:
hcid_dbus_bonding_process_complete: no pending auth request
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]: State changed
/org/bluez/2713/hci0/dev_00_0D_FD_1E_99_30: HEADSET_STATE_DISCONNECTED
-> HEADSET_STATE_CONNECT_IN_PROGRESS
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]:
/org/bluez/2713/hci0/dev_00_0D_FD_1E_99_30: Connected to 00:0D:FD:1E:99:30
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]: telephony-dummy: device
0x7fd0c11d4230 connected
Sep 4 07:30:05 dev-wkstn bluetoothd[2713]: State changed
/org/bluez/2713/hci0/dev_00_0D_FD_1E_99_30:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: avdtp_ref(0x7fd0c11c9f50): ref=2
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: avdtp_ref(0x7fd0c11c9f50): ref=3
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: avdtp_unref(0x7fd0c11c9f50):
ref=2
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: Received AT+CKPD=200
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: telephony-dummy: got key
press request for 200
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: AVDTP: incoming connect from
00:0D:FD:1E:99:30
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: AVDTP: connected signaling
channel to 00:0D:FD:1E:99:30
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: AVDTP imtu=672, omtu=895
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: send: Transport endpoint is
not connected (107)
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: session_cb
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: Received DISCOVER_CMD
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: send: Transport endpoint is
not connected (107)
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: Unable to handle command.
Disconnecting
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: Disconnected from
00:0D:FD:1E:99:30
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: avdtp_unref(0x7fd0c11c9f50):
ref=1
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: connect:connect XCASE detected
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: avdtp_unref(0x7fd0c11c9f50):
ref=0
Sep 4 07:30:06 dev-wkstn bluetoothd[2713]: avdtp_unref(0x7fd0c11c9f50):
freeing session and removing from list
Sep 4 07:30:09 dev-wkstn bluetoothd[2713]: Stream setup failed, after
XCASE connect:connect
If this is related to the auth_cb fix, would you please explain how?
Regards,
Peter
next prev parent reply other threads:[~2009-09-04 17:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-04 3:02 [4.48] SDP Discovery not reset on error Peter Hurley
2009-09-04 6:31 ` Johan Hedberg
2009-09-04 15:28 ` Peter Hurley
2009-09-04 15:56 ` Johan Hedberg
2009-09-04 17:49 ` Peter Hurley [this message]
2009-09-04 19:41 ` Johan Hedberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AA1533D.7090505@charter.net \
--to=phurley@charter.net \
--cc=johan.hedberg@nokia.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox