magicmouse: claimed by neither input, hiddev nor hidraw

linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* magicmouse: claimed by neither input, hiddev nor hidraw
@ 2010-05-10 20:41 Justin Mattock
  2010-05-10 21:08 ` Justin P. Mattock
  2010-05-10 21:34 ` Jiri Kosina
  0 siblings, 2 replies; 14+ messages in thread
From: Justin Mattock @ 2010-05-10 20:41 UTC (permalink / raw)
  To: linux-bluetooth; +Cc: Linux Kernel Mailing List

is it me, or is there something wrong
with the magicmouse connecting
i.g. I've had my system setup to use the
magicmouse with 2.6.33* with no issues
now coming back after sometime
seems everything is connecting,but then no movement:
(and some thing in dmesg):
[  116.267993] magicmouse 0005:05AC:030D.0007: claimed by neither
input, hiddev nor hidraw
[  116.268053] magicmouse 0005:05AC:030D.0007: magicmouse hw start failed

using osx  magicmouse connects fine.
Using standard mightymouse everything connects.
 are there any reports of such things?

-- 
Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 20:41 magicmouse: claimed by neither input, hiddev nor hidraw Justin Mattock
@ 2010-05-10 21:08 ` Justin P. Mattock
  2010-05-10 21:34 ` Jiri Kosina
  1 sibling, 0 replies; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-10 21:08 UTC (permalink / raw)
  To: linux-bluetooth; +Cc: Linux Kernel Mailing List

On 05/10/2010 01:41 PM, Justin Mattock wrote:
> is it me, or is there something wrong
> with the magicmouse connecting
> i.g. I've had my system setup to use the
> magicmouse with 2.6.33* with no issues
> now coming back after sometime
> seems everything is connecting,but then no movement:
> (and some thing in dmesg):
> [  116.267993] magicmouse 0005:05AC:030D.0007: claimed by neither
> input, hiddev nor hidraw
> [  116.268053] magicmouse 0005:05AC:030D.0007: magicmouse hw start failed
>
> using osx  magicmouse connects fine.
> Using standard mightymouse everything connects.
>   are there any reports of such things?
>
>

nevermind.. my bad, ended up not
having hiddraw enabled in the kernel.

everything looks good, suspend etc..

Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 20:41 magicmouse: claimed by neither input, hiddev nor hidraw Justin Mattock
  2010-05-10 21:08 ` Justin P. Mattock
@ 2010-05-10 21:34 ` Jiri Kosina
  2010-05-10 21:39   ` Justin Mattock
  1 sibling, 1 reply; 14+ messages in thread
From: Jiri Kosina @ 2010-05-10 21:34 UTC (permalink / raw)
  To: Justin Mattock; +Cc: linux-bluetooth, Linux Kernel Mailing List

On Mon, 10 May 2010, Justin Mattock wrote:

> is it me, or is there something wrong
> with the magicmouse connecting
> i.g. I've had my system setup to use the
> magicmouse with 2.6.33* with no issues
> now coming back after sometime
> seems everything is connecting,but then no movement:
> (and some thing in dmesg):
> [  116.267993] magicmouse 0005:05AC:030D.0007: claimed by neither
> input, hiddev nor hidraw
> [  116.268053] magicmouse 0005:05AC:030D.0007: magicmouse hw start failed
> 
> using osx  magicmouse connects fine.
> Using standard mightymouse everything connects.
>  are there any reports of such things?

Adding Michael Poole to CC.
                                                                                                                                              
No, I haven't seen any such reports. First -- could you please provide 
complete dmesg?

-- 
Jiri Kosina
SUSE Labs, Novell Inc.


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 21:34 ` Jiri Kosina
@ 2010-05-10 21:39   ` Justin Mattock
  2010-05-10 21:52     ` Jiri Kosina
  0 siblings, 1 reply; 14+ messages in thread
From: Justin Mattock @ 2010-05-10 21:39 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: linux-bluetooth, Linux Kernel Mailing List

On Mon, May 10, 2010 at 2:34 PM, Jiri Kosina <jkosina@suse.cz> wrote:
> On Mon, 10 May 2010, Justin Mattock wrote:
>
>> is it me, or is there something wrong
>> with the magicmouse connecting
>> i.g. I've had my system setup to use the
>> magicmouse with 2.6.33* with no issues
>> now coming back after sometime
>> seems everything is connecting,but then no movement:
>> (and some thing in dmesg):
>> [  116.267993] magicmouse 0005:05AC:030D.0007: claimed by neither
>> input, hiddev nor hidraw
>> [  116.268053] magicmouse 0005:05AC:030D.0007: magicmouse hw start failed
>>
>> using osx  magicmouse connects fine.
>> Using standard mightymouse everything connects.
>>  are there any reports of such things?
>
> Adding Michael Poole to CC.
>
> No, I haven't seen any such reports. First -- could you please provide
> complete dmesg?
>
> --
> Jiri Kosina
> SUSE Labs, Novell Inc.
>
>

everything seems to be working o.k. now,
just had to enable HIDRAW=y
maybe something changed to where
I needed this(I remember never really
using hidraw, just HIDDEV(but could be wrong)).

-- 
Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 21:39   ` Justin Mattock
@ 2010-05-10 21:52     ` Jiri Kosina
  2010-05-10 22:15       ` Justin P. Mattock
                         ` (2 more replies)
  0 siblings, 3 replies; 14+ messages in thread
From: Jiri Kosina @ 2010-05-10 21:52 UTC (permalink / raw)
  To: Justin Mattock; +Cc: linux-bluetooth, Linux Kernel Mailing List

On Mon, 10 May 2010, Justin Mattock wrote:

> >> with the magicmouse connecting i.g. I've had my system setup to use 
> >> the magicmouse with 2.6.33* with no issues now coming back after 
> >> sometime seems everything is connecting,but then no movement: (and 
> >> some thing in dmesg):
> >> [  116.267993] magicmouse 0005:05AC:030D.0007: claimed by neither
> >> input, hiddev nor hidraw
> >> [  116.268053] magicmouse 0005:05AC:030D.0007: magicmouse hw start failed
> >> using osx  magicmouse connects fine.
> >> Using standard mightymouse everything connects.
> >>  are there any reports of such things?
> >
> > Adding Michael Poole to CC.
> >
> > No, I haven't seen any such reports. First -- could you please provide
> > complete dmesg?
> 
> everything seems to be working o.k. now, just had to enable HIDRAW=y 
> maybe something changed to where I needed this(I remember never really 
> using hidraw, just HIDDEV(but could be wrong)).

This sounds a bit strange.

hidraw shouldn't be making too much difference in the case you describe. 
hidraw is basically just a mean of relaying HID events to userspace so 
that any driver/application in userspace can access them. But magicmouse 
driver is written completely in kernelspace.

Does anything on your system have /dev/hidraw* nodes open? (you could 
check by lsof).

-- 
Jiri Kosina
SUSE Labs, Novell Inc.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 21:52     ` Jiri Kosina
@ 2010-05-10 22:15       ` Justin P. Mattock
  2010-05-11  2:28         ` Michael Poole
  2010-05-11 14:26       ` Justin P. Mattock
  2010-05-11 16:32       ` Justin P. Mattock
  2 siblings, 1 reply; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-10 22:15 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: linux-bluetooth, Linux Kernel Mailing List

On 05/10/2010 02:52 PM, Jiri Kosina wrote:
> On Mon, 10 May 2010, Justin Mattock wrote:
>
>>>> with the magicmouse connecting i.g. I've had my system setup to use
>>>> the magicmouse with 2.6.33* with no issues now coming back after
>>>> sometime seems everything is connecting,but then no movement: (and
>>>> some thing in dmesg):
>>>> [  116.267993] magicmouse 0005:05AC:030D.0007: claimed by neither
>>>> input, hiddev nor hidraw
>>>> [  116.268053] magicmouse 0005:05AC:030D.0007: magicmouse hw start failed
>>>> using osx  magicmouse connects fine.
>>>> Using standard mightymouse everything connects.
>>>>   are there any reports of such things?
>>>
>>> Adding Michael Poole to CC.
>>>
>>> No, I haven't seen any such reports. First -- could you please provide
>>> complete dmesg?
>>
>> everything seems to be working o.k. now, just had to enable HIDRAW=y
>> maybe something changed to where I needed this(I remember never really
>> using hidraw, just HIDDEV(but could be wrong)).
>
> This sounds a bit strange.
>
> hidraw shouldn't be making too much difference in the case you describe.
> hidraw is basically just a mean of relaying HID events to userspace so
> that any driver/application in userspace can access them. But magicmouse
> driver is written completely in kernelspace.
>
> Does anything on your system have /dev/hidraw* nodes open? (you could
> check by lsof).
>


right now I see
/dev/hidraw0,1,2,3

./lsof | grep /dev
(showing bluetooth)

bluetooth 2020   root    0u      CHR                1,3       0t0 2551 
/dev/null
bluetooth 2020   root    1u      CHR                1,3       0t0 2551 
/dev/null
bluetooth 2020   root    2u      CHR                1,3       0t0 2551 
/dev/null
bluetooth 2020   root   14u      CHR              10,62       0t0 3895 
/dev/rfkill

I can try a bisect on this and see.


Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 22:15       ` Justin P. Mattock
@ 2010-05-11  2:28         ` Michael Poole
  2010-05-11  2:45           ` Justin P. Mattock
  2010-05-11  2:58           ` Justin P. Mattock
  0 siblings, 2 replies; 14+ messages in thread
From: Michael Poole @ 2010-05-11  2:28 UTC (permalink / raw)
  To: Justin P. Mattock; +Cc: Jiri Kosina, linux-bluetooth, Linux Kernel Mailing List

Justin P. Mattock writes:

> On 05/10/2010 02:52 PM, Jiri Kosina wrote:
[snip]
>> This sounds a bit strange.
>>
>> hidraw shouldn't be making too much difference in the case you describe.
>> hidraw is basically just a mean of relaying HID events to userspace so
>> that any driver/application in userspace can access them. But magicmouse
>> driver is written completely in kernelspace.
>>
>> Does anything on your system have /dev/hidraw* nodes open? (you could
>> check by lsof).
>>
>
>
> right now I see
> /dev/hidraw0,1,2,3
>
> ./lsof | grep /dev
> (showing bluetooth)
>
> bluetooth 2020   root    0u      CHR                1,3       0t0 2551
> /dev/null
> bluetooth 2020   root    1u      CHR                1,3       0t0 2551
> /dev/null
> bluetooth 2020   root    2u      CHR                1,3       0t0 2551
> /dev/null
> bluetooth 2020   root   14u      CHR              10,62       0t0 3895
> /dev/rfkill
>
> I can try a bisect on this and see.

A list of which patches you have applied would also be helpful.  The
standard 2.6.33.* kernels predate the merge of the hid-magicmouse
driver, but the dmesg entry you pasted makes it look like the driver was
present.

Michael Poole

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-11  2:28         ` Michael Poole
@ 2010-05-11  2:45           ` Justin P. Mattock
  2010-05-11  2:58           ` Justin P. Mattock
  1 sibling, 0 replies; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-11  2:45 UTC (permalink / raw)
  To: Michael Poole; +Cc: Jiri Kosina, linux-bluetooth, Linux Kernel Mailing List

On 05/10/2010 07:28 PM, Michael Poole wrote:
> Justin P. Mattock writes:
>
>    
>> On 05/10/2010 02:52 PM, Jiri Kosina wrote:
>>      
> [snip]
>    
>>> This sounds a bit strange.
>>>
>>> hidraw shouldn't be making too much difference in the case you describe.
>>> hidraw is basically just a mean of relaying HID events to userspace so
>>> that any driver/application in userspace can access them. But magicmouse
>>> driver is written completely in kernelspace.
>>>
>>> Does anything on your system have /dev/hidraw* nodes open? (you could
>>> check by lsof).
>>>
>>>        
>>
>> right now I see
>> /dev/hidraw0,1,2,3
>>
>> ./lsof | grep /dev
>> (showing bluetooth)
>>
>> bluetooth 2020   root    0u      CHR                1,3       0t0 2551
>> /dev/null
>> bluetooth 2020   root    1u      CHR                1,3       0t0 2551
>> /dev/null
>> bluetooth 2020   root    2u      CHR                1,3       0t0 2551
>> /dev/null
>> bluetooth 2020   root   14u      CHR              10,62       0t0 3895
>> /dev/rfkill
>>
>> I can try a bisect on this and see.
>>      
> A list of which patches you have applied would also be helpful.  The
> standard 2.6.33.* kernels predate the merge of the hid-magicmouse
> driver, but the dmesg entry you pasted makes it look like the driver was
> present.
>
> Michael Poole
>
>    
I'm using the latest HEAD, without any patches
applied. (I'll send a post with dmesg after this post).

Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-11  2:28         ` Michael Poole
  2010-05-11  2:45           ` Justin P. Mattock
@ 2010-05-11  2:58           ` Justin P. Mattock
  2010-05-11  7:47             ` Jiri Kosina
  1 sibling, 1 reply; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-11  2:58 UTC (permalink / raw)
  To: Michael Poole; +Cc: Jiri Kosina, linux-bluetooth, Linux Kernel Mailing List

On 05/10/2010 07:28 PM, Michael Poole wrote:
> Justin P. Mattock writes:
>
>    
>> On 05/10/2010 02:52 PM, Jiri Kosina wrote:
>>      
> [snip]
>    
>>> This sounds a bit strange.
>>>
>>> hidraw shouldn't be making too much difference in the case you describe.
>>> hidraw is basically just a mean of relaying HID events to userspace so
>>> that any driver/application in userspace can access them. But magicmouse
>>> driver is written completely in kernelspace.
>>>
>>> Does anything on your system have /dev/hidraw* nodes open? (you could
>>> check by lsof).
>>>
>>>        
>>
>> right now I see
>> /dev/hidraw0,1,2,3
>>
>> ./lsof | grep /dev
>> (showing bluetooth)
>>
>> bluetooth 2020   root    0u      CHR                1,3       0t0 2551
>> /dev/null
>> bluetooth 2020   root    1u      CHR                1,3       0t0 2551
>> /dev/null
>> bluetooth 2020   root    2u      CHR                1,3       0t0 2551
>> /dev/null
>> bluetooth 2020   root   14u      CHR              10,62       0t0 3895
>> /dev/rfkill
>>
>> I can try a bisect on this and see.
>>      
> A list of which patches you have applied would also be helpful.  The
> standard 2.6.33.* kernels predate the merge of the hid-magicmouse
> driver, but the dmesg entry you pasted makes it look like the driver was
> present.
>
> Michael Poole
>
>    
The only other thing that I remember
when adding hidraw was adding
BT_HCIUART_LL=m
(not sure if it matters or not).

here is dmesg:
http://fpaste.org/OiDf/

Justin P. Mattock


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-11  2:58           ` Justin P. Mattock
@ 2010-05-11  7:47             ` Jiri Kosina
  2010-05-11  7:56               ` Justin P. Mattock
  2010-05-11  8:01               ` Justin P. Mattock
  0 siblings, 2 replies; 14+ messages in thread
From: Jiri Kosina @ 2010-05-11  7:47 UTC (permalink / raw)
  To: Justin P. Mattock
  Cc: Michael Poole, linux-bluetooth, Linux Kernel Mailing List

On Mon, 10 May 2010, Justin P. Mattock wrote:

> The only other thing that I remember when adding hidraw was adding 
> BT_HCIUART_LL=m (not sure if it matters or not).
> 
> here is dmesg:
> http://fpaste.org/OiDf/

Please include the dmesg directly in the mail next time.

Anyway, I don't see the dmesg you provided containing neither the "claimed
by neither input, hiddev nor hidraw" nor "hw start failed" messages.

-- 
Jiri Kosina
SUSE Labs, Novell Inc.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-11  7:47             ` Jiri Kosina
@ 2010-05-11  7:56               ` Justin P. Mattock
  2010-05-11  8:01               ` Justin P. Mattock
  1 sibling, 0 replies; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-11  7:56 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: Michael Poole, linux-bluetooth, Linux Kernel Mailing List

On 05/11/10 00:47, Jiri Kosina wrote:
> On Mon, 10 May 2010, Justin P. Mattock wrote:
>
>> The only other thing that I remember when adding hidraw was adding
>> BT_HCIUART_LL=m (not sure if it matters or not).
>>
>> here is dmesg:
>> http://fpaste.org/OiDf/
>
> Please include the dmesg directly in the mail next time.
>
> Anyway, I don't see the dmesg you provided containing neither the "claimed
> by neither input, hiddev nor hidraw" nor "hw start failed" messages.
>

I'll post that on the next thread
here is the bisect results:

28918c211d86b6eeb70182c523800c7bc442960c is the first bad commit
commit 28918c211d86b6eeb70182c523800c7bc442960c
Author: Michael Poole <mdpoole@troilus.org>
Date:   Tue Mar 9 06:47:35 2010 -0500

     HID: magicmouse: fix oops after device removal

     Ask the HID core not to register an input device for the mouse.
     Fix an oops after removing the device, due to leaving the new
     input device registered.

     Signed-off-by: Michael Poole <mdpoole@troilus.org>
     Signed-off-by: Jiri Kosina <jkosina@suse.cz>

:040000 040000 f84a3ea09666b18abb20b59c128f6fecc5833dfa 
62cdf6cec329e4b761909d02558097ca78d76394 M      drivers

although I have not yet tested this out
with git revert xxxx on the current head.
(me thinks it's another).

here is the bisect log:

# bad: [f1c448e0a9e99c76f4ece368714fb35a40a8daba] Merge branch 
'for-linus' of git://neil.brown.name/md
git bisect bad f1c448e0a9e99c76f4ece368714fb35a40a8daba
# good: [57d54889cd00db2752994b389ba714138652e60c] Linux 2.6.34-rc1
git bisect good 57d54889cd00db2752994b389ba714138652e60c
# bad: [53feb29767c29c877f9d47dcfe14211b5b0f7ebd] cpuset: alloc 
nodemask_t on the heap rather than the stack
git bisect bad 53feb29767c29c877f9d47dcfe14211b5b0f7ebd
# good: [d89b218b801fd93ea95880f1c7fde348cbcc51c5] Merge 
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
git bisect good d89b218b801fd93ea95880f1c7fde348cbcc51c5
# bad: [9d20593a722c2dab7a5ab74f5d8c9b604aca52f9] Merge branch 'merge' 
of git://git.secretlab.ca/git/linux-2.6
git bisect bad 9d20593a722c2dab7a5ab74f5d8c9b604aca52f9
# good: [441f4058a04b2943685ff94e0f5f1992b0b3649e] Merge 
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
git bisect good 441f4058a04b2943685ff94e0f5f1992b0b3649e
# bad: [961cde93dee2658000ead32abffb8ddf0727abe0] Merge 
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
git bisect bad 961cde93dee2658000ead32abffb8ddf0727abe0
# good: [2993cc71d1bff61999ade7f2b6b3ea2dd1e2c8d9] [SCSI] bfa: AEN and 
byte alignment fixes.
git bisect good 2993cc71d1bff61999ade7f2b6b3ea2dd1e2c8d9
# good: [a12b51c478899fe0b7e874a559b05ba35f1128ee] perf tools: Fix 
sparse CPU numbering related bugs
git bisect good a12b51c478899fe0b7e874a559b05ba35f1128ee
# bad: [f82c37e7bb4c4d9b6a476c642d5c2d2efbd6f240] Merge branch 
'perf-fixes-for-linus' of 
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
git bisect bad f82c37e7bb4c4d9b6a476c642d5c2d2efbd6f240
# good: [dcd5c1662db59a6b82942f47fb6ac9dd63f6d3dd] perf: Fix unexported 
generic perf_arch_fetch_caller_regs
git bisect good dcd5c1662db59a6b82942f47fb6ac9dd63f6d3dd
# bad: [2886539d5e649c22a6d2107eb431d3bee81e0e6d] HID: ntrig: fix touch 
events
git bisect bad 2886539d5e649c22a6d2107eb431d3bee81e0e6d
# bad: [eff7f270e9a05688066f40589d7b44e1dcf335dc] HID: add quirk for 
UC-Logik WP4030 tablet
git bisect bad eff7f270e9a05688066f40589d7b44e1dcf335dc
# bad: [28918c211d86b6eeb70182c523800c7bc442960c] HID: magicmouse: fix 
oops after device removal
git bisect bad 28918c211d86b6eeb70182c523800c7bc442960c

I'm thinking it might be  HID: ntrig: fix touch

Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-11  7:47             ` Jiri Kosina
  2010-05-11  7:56               ` Justin P. Mattock
@ 2010-05-11  8:01               ` Justin P. Mattock
  1 sibling, 0 replies; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-11  8:01 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: Michael Poole, linux-bluetooth, Linux Kernel Mailing List

here is dmesg with the:
[   27.435674] magicmouse 0005:05AC:030D.0004: claimed by neither input, 
hiddev nor hidraw
[   27.435686] magicmouse 0005:05AC:030D.0004: magicmouse hw start failed




[    0.000000] Linux version 2.6.33-00095-g28918c2 (name@name) (gcc 
version 4.4.2 (GCC) ) #19 SMP Tue May 11 00:49:25 PDT 2010
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda3 ro 
debug audit=1 selinux=1 vga=790 enforcing=0
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[    0.000000]  BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 03FF00000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 
0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-000000003f0ea000
[    0.000000]  0000000000 - 003f000000 page 2M
[    0.000000]  003f000000 - 003f0ea000 page 4k
[    0.000000] kernel direct mapping tables up to 3f0ea000 @ 8000-b000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT 000000003fefd1c0 00074 (v01 APPLE   Apple00 
000000A5      01000013)
[    0.000000] ACPI: FACP 000000003fefb000 000F4 (v03 APPLE   Apple00 
000000A5 Loki 0000005F)
[    0.000000] ACPI: DSDT 000000003fef0000 048D1 (v01 APPLE  MacBookP 
00020002 INTL 20050309)
[    0.000000] ACPI: FACS 000000003fec0000 00040
[    0.000000] ACPI: HPET 000000003fefa000 00038 (v01 APPLE   Apple00 
00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 000000003fef9000 00068 (v01 APPLE   Apple00 
00000001 Loki 0000005F)
[    0.000000] ACPI: MCFG 000000003fef8000 0003C (v01 APPLE   Apple00 
00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! 000000003fef7000 000A0 (v32 APPLE   Apple00 
00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 000000003fef6000 00030 (v01 APPLE   Apple00 
00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 000000003fef5000 00053 (v01 APPLE   Apple00 
00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 000000003feef000 004DC (v01 APPLE     CpuPm 
00003000 INTL 20050309)
[    0.000000] ACPI: SSDT 000000003febd000 0064F (v01 SataRe  SataPri 
00001000 INTL 20050309)
[    0.000000] ACPI: SSDT 000000003febc000 0069C (v01 SataRe  SataSec 
00001000 INTL 20050309)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 003f0ea000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> 
[0000000000 - 0000001000]
[    0.000000]   #1 [0001000000 - 00017a36c8]    TEXT DATA BSS ==> 
[0001000000 - 00017a36c8]
[    0.000000]   #2 [000009fc00 - 0000100000]    BIOS reserved ==> 
[000009fc00 - 0000100000]
[    0.000000]   #3 [00017a4000 - 00017a4271]              BRK ==> 
[00017a4000 - 00017a4271]
[    0.000000]   #4 [0000001000 - 0000003000]       TRAMPOLINE ==> 
[0000001000 - 0000003000]
[    0.000000]   #5 [0000003000 - 0000007000]      ACPI WAKEUP ==> 
[0000003000 - 0000007000]
[    0.000000]   #6 [0000008000 - 0000009000]          PGTABLE ==> 
[0000008000 - 0000009000]
[    0.000000]  [ffffea0000000000-ffffea0000dfffff] PMD -> 
[ffff880001c00000-ffff8800029fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f0ea
[    0.000000] On node 0 totalpages: 258185
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3839 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3476 pages used for memmap
[    0.000000]   DMA32 zone: 250710 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 
00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 
0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 
40000000:b0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 
nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s91096 
r8192 d23592 u1048576
[    0.000000] pcpu-alloc: s91096 r8192 d23592 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
Total pages: 254549
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz 
root=/dev/sda3 ro debug audit=1 selinux=1 vga=790 enforcing=0
[    0.000000] audit: enabled (after initialization)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 
1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 
bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 1007964k/1033128k available (3997k kernel code, 
388k absent, 24084k reserved, 2503k data, 504k init)
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, 
CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:320
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using HPET reference calibration
[    0.000000] Detected 2161.241 MHz processor.
[    0.004007] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 4322.48 BogoMIPS (lpj=2161241)
[    0.004080] Security Framework initialized
[    0.004091] SELinux:  Initializing.
[    0.004123] SELinux:  Starting in permissive mode
[    0.004142] Mount-cache hash table entries: 256
[    0.005619] CPU: Physical Processor ID: 0
[    0.005624] CPU: Processor Core ID: 0
[    0.005630] mce: CPU supports 6 MCE banks
[    0.005655] CPU0: Thermal monitoring enabled (TM2)
[    0.005662] using mwait in idle threads.
[    0.005667] Performance Events: Core2 events, Intel PMU driver.
[    0.005677] ... version:                2
[    0.005682] ... bit width:              40
[    0.005686] ... generic registers:      2
[    0.005691] ... value mask:             000000ffffffffff
[    0.005696] ... max period:             000000007fffffff
[    0.005701] ... fixed-purpose events:   3
[    0.005706] ... event mask:             0000000700000003
[    0.006919] ACPI: Core revision 20091214
[    0.030203] Setting APIC routing to flat
[    0.030591] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.040636] CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz 
stepping 06
[    0.040999] Booting Node   0, Processors  #1 Ok.
[    0.112042] Brought up 2 CPUs
[    0.112051] Total of 2 processors activated (8644.79 BogoMIPS).
[    0.114299] NET: Registered protocol family 16
[    0.116077] ACPI: bus type pci registered
[    0.116172] PCI: Using configuration type 1 for base access
[    0.132295] bio: create slab <bio-0> at 0
[    0.135069] ACPI: EC: EC description table is found, configuring boot EC
[    0.143361] ACPI: BIOS _OSI(Linux) query ignored
[    0.144603] ACPI: Interpreter enabled
[    0.144611] ACPI: (supports S0 S3 S4 S5)
[    0.144715] ACPI: Using IOAPIC for interrupt routing
[    0.178270] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.180074] ACPI: No dock devices found.
[    0.183463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.183584] pci_root PNP0A08:00: ignoring host bridge windows from 
ACPI; boot with "pci=use_crs" to use them
[    0.188651] pci_root PNP0A08:00: host bridge window [io 
0x0000-0x0cf7] (ignored)
[    0.188660] pci_root PNP0A08:00: host bridge window [io 
0x0d00-0xffff] (ignored)
[    0.188669] pci_root PNP0A08:00: host bridge window [mem 
0x000a0000-0x000bffff] (ignored)
[    0.188679] pci_root PNP0A08:00: host bridge window [mem 
0x40000000-0xfebfffff] (ignored)
[    0.188786] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.188793] pci 0000:00:01.0: PME# disabled
[    0.188831] pci 0000:00:07.0: reg 10: [mem 0x50404000-0x50404fff]
[    0.188933] pci 0000:00:1b.0: reg 10: [mem 0x50400000-0x50403fff 64bit]
[    0.189004] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.189012] pci 0000:00:1b.0: PME# disabled
[    0.189118] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189127] pci 0000:00:1c.0: PME# disabled
[    0.189236] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.189244] pci 0000:00:1c.1: PME# disabled
[    0.189353] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.189362] pci 0000:00:1c.2: PME# disabled
[    0.189437] pci 0000:00:1d.0: reg 20: [io  0x4080-0x409f]
[    0.189510] pci 0000:00:1d.1: reg 20: [io  0x4060-0x407f]
[    0.189583] pci 0000:00:1d.2: reg 20: [io  0x4040-0x405f]
[    0.189664] pci 0000:00:1d.3: reg 20: [io  0x4020-0x403f]
[    0.189735] pci 0000:00:1d.7: reg 10: [mem 0x50405400-0x504057ff]
[    0.189803] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.189812] pci 0000:00:1d.7: PME# disabled
[    0.189992] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by 
ICH6 ACPI/GPIO/TCO
[    0.190004] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by 
ICH6 GPIO
[    0.190012] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 
0680 (mask 000f)
[    0.190022] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 
1640 (mask 000f)
[    0.190035] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 
0300 (mask 001f)
[    0.190132] pci 0000:00:1f.1: reg 10: [io  0x40d8-0x40df]
[    0.190144] pci 0000:00:1f.1: reg 14: [io  0x40ec-0x40ef]
[    0.190155] pci 0000:00:1f.1: reg 18: [io  0x40d0-0x40d7]
[    0.190166] pci 0000:00:1f.1: reg 1c: [io  0x40e8-0x40eb]
[    0.190177] pci 0000:00:1f.1: reg 20: [io  0x40b0-0x40bf]
[    0.190238] pci 0000:00:1f.2: reg 10: [io  0x40c8-0x40cf]
[    0.190250] pci 0000:00:1f.2: reg 14: [io  0x40e4-0x40e7]
[    0.190261] pci 0000:00:1f.2: reg 18: [io  0x40c0-0x40c7]
[    0.190272] pci 0000:00:1f.2: reg 1c: [io  0x40e0-0x40e3]
[    0.190283] pci 0000:00:1f.2: reg 20: [io  0x40a0-0x40af]
[    0.190295] pci 0000:00:1f.2: reg 24: [mem 0x50405000-0x504053ff]
[    0.190329] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190337] pci 0000:00:1f.2: PME# disabled
[    0.190407] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.190485] pci 0000:01:00.0: reg 10: [mem 0x40000000-0x47ffffff pref]
[    0.190497] pci 0000:01:00.0: reg 14: [io  0x3000-0x30ff]
[    0.190509] pci 0000:01:00.0: reg 18: [mem 0x50300000-0x5030ffff]
[    0.190531] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.190561] pci 0000:01:00.0: supports D1 D2
[    0.190626] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.190633] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.190640] pci 0000:00:01.0:   bridge window [mem 0x50300000-0x503fffff]
[    0.190649] pci 0000:00:01.0:   bridge window [mem 
0x40000000-0x47ffffff 64bit pref]
[    0.190723] pci 0000:02:00.0: reg 10: [mem 0x50200000-0x50203fff 64bit]
[    0.190738] pci 0000:02:00.0: reg 18: [io  0x2000-0x20ff]
[    0.190777] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.190836] pci 0000:02:00.0: supports D1 D2
[    0.190841] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.190851] pci 0000:02:00.0: PME# disabled
[    0.190918] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.190926] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.190935] pci 0000:00:1c.0:   bridge window [mem 0x50200000-0x502fffff]
[    0.191017] pci 0000:03:00.0: reg 10: [mem 0x50100000-0x5010ffff 64bit]
[    0.191114] pci 0000:03:00.0: supports D1
[    0.191119] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.191129] pci 0000:03:00.0: PME# disabled
[    0.191205] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.191216] pci 0000:00:1c.1:   bridge window [mem 0x50100000-0x501fffff]
[    0.191291] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.191299] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.191308] pci 0000:00:1c.2:   bridge window [mem 0x4c100000-0x500fffff]
[    0.191320] pci 0000:00:1c.2:   bridge window [mem 
0x48000000-0x4bffffff 64bit pref]
[    0.191385] pci 0000:0c:03.0: reg 10: [mem 0x4c004000-0x4c0047ff]
[    0.191398] pci 0000:0c:03.0: reg 14: [mem 0x4c000000-0x4c003fff]
[    0.191466] pci 0000:0c:03.0: supports D1 D2
[    0.191471] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[    0.191481] pci 0000:0c:03.0: PME# disabled
[    0.191548] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive 
decode)
[    0.191560] pci 0000:00:1e.0:   bridge window [mem 0x4c000000-0x4c0fffff]
[    0.191599] pci_bus 0000:00: on NUMA node 0
[    0.191610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.192869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.193290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.193699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.194113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.194586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.228230] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 
14 15) *11
[    0.228564] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 
14 15)
[    0.228902] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 
14 15) *11
[    0.229239] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 
14 15)
[    0.229568] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 
14 15) *0, disabled.
[    0.229907] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 
14 15) *0, disabled.
[    0.230249] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 
14 15)
[    0.230581] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.231100] vgaarb: device added: 
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.231100] vgaarb: loaded
[    0.232081] SCSI subsystem initialized
[    0.232081] libata version 3.00 loaded.
[    0.232110] usbcore: registered new interface driver usbfs
[    0.232110] usbcore: registered new interface driver hub
[    0.233021] usbcore: registered new device driver usb
[    0.233096] PCI: Using ACPI for IRQ routing
[    0.233096] PCI: pci_cache_line_size set to 64 bytes
[    0.234251] cfg80211: Calling CRDA to update world regulatory domain
[    0.235029] NetLabel: Initializing
[    0.235029] NetLabel:  domain hash size = 128
[    0.235029] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.235071] NetLabel:  unlabeled traffic allowed by default
[    0.235082] HPET: 3 timers in total, 0 timers will be used for 
per-cpu timer
[    0.235093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.235101] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.238007] Switching to clocksource tsc
[    0.249831] pnp: PnP ACPI init
[    0.249886] ACPI: bus type pnp registered
[    0.256306] pnp 00:07: disabling [io  0x1640-0x164f] because it 
overlaps 0000:00:1c.2 BAR 7 [io  0x1000-0x1fff]
[    0.261321] pnp: PnP ACPI: found 9 devices
[    0.261327] ACPI: ACPI bus type pnp unregistered
[    0.261347] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.261356] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.261363] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.261371] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.261379] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.261387] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.261401] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.261415] system 00:07: [io  0x0680-0x06ef] has been reserved
[    0.261423] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.261430] system 00:07: [io  0x0810-0x0817] has been reserved
[    0.261437] system 00:07: [io  0x0400-0x047f] has been reserved
[    0.261445] system 00:07: [io  0x0500-0x053f] has been reserved
[    0.267603] pci 0000:01:00.0: no compatible bridge window for [mem 
0xfffe0000-0xffffffff pref]
[    0.267615] pci 0000:02:00.0: no compatible bridge window for [mem 
0xfffe0000-0xffffffff pref]
[    0.267679] pci 0000:00:1c.0: BAR 9: assigned [mem 
0x50500000-0x506fffff pref]
[    0.267689] pci 0000:00:1c.1: BAR 9: assigned [mem 
0x50700000-0x508fffff 64bit pref]
[    0.267699] pci 0000:00:1c.1: BAR 7: assigned [io  0x5000-0x5fff]
[    0.267707] pci 0000:01:00.0: BAR 6: assigned [mem 
0x50320000-0x5033ffff pref]
[    0.267716] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.267722] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.267730] pci 0000:00:01.0:   bridge window [mem 0x50300000-0x503fffff]
[    0.267738] pci 0000:00:01.0:   bridge window [mem 
0x40000000-0x47ffffff 64bit pref]
[    0.267750] pci 0000:02:00.0: BAR 6: assigned [mem 
0x50500000-0x5051ffff pref]
[    0.267759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.267766] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.267776] pci 0000:00:1c.0:   bridge window [mem 0x50200000-0x502fffff]
[    0.267785] pci 0000:00:1c.0:   bridge window [mem 
0x50500000-0x506fffff pref]
[    0.267798] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.267805] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.267815] pci 0000:00:1c.1:   bridge window [mem 0x50100000-0x501fffff]
[    0.267824] pci 0000:00:1c.1:   bridge window [mem 
0x50700000-0x508fffff 64bit pref]
[    0.267838] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.267845] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.267855] pci 0000:00:1c.2:   bridge window [mem 0x4c100000-0x500fffff]
[    0.267864] pci 0000:00:1c.2:   bridge window [mem 
0x48000000-0x4bffffff 64bit pref]
[    0.267878] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[    0.267883] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.267893] pci 0000:00:1e.0:   bridge window [mem 0x4c000000-0x4c0fffff]
[    0.267901] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.267928] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.267936] pci 0000:00:01.0: setting latency timer to 64
[    0.267951] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.267960] pci 0000:00:1c.0: setting latency timer to 64
[    0.267974] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.267983] pci 0000:00:1c.1: setting latency timer to 64
[    0.267998] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.268007] pci 0000:00:1c.2: setting latency timer to 64
[    0.268183] pci 0000:00:1e.0: power state changed by ACPI to D0
[    0.268194] pci 0000:00:1e.0: setting latency timer to 64
[    0.268202] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.268208] pci_bus 0000:00: resource 1 [mem 
0x00000000-0xffffffffffffffff]
[    0.268215] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.268220] pci_bus 0000:01: resource 1 [mem 0x50300000-0x503fffff]
[    0.268227] pci_bus 0000:01: resource 2 [mem 0x40000000-0x47ffffff 
64bit pref]
[    0.268235] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.268241] pci_bus 0000:02: resource 1 [mem 0x50200000-0x502fffff]
[    0.268247] pci_bus 0000:02: resource 2 [mem 0x50500000-0x506fffff pref]
[    0.268253] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.268258] pci_bus 0000:03: resource 1 [mem 0x50100000-0x501fffff]
[    0.268264] pci_bus 0000:03: resource 2 [mem 0x50700000-0x508fffff 
64bit pref]
[    0.268273] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.268278] pci_bus 0000:04: resource 1 [mem 0x4c100000-0x500fffff]
[    0.268285] pci_bus 0000:04: resource 2 [mem 0x48000000-0x4bffffff 
64bit pref]
[    0.268293] pci_bus 0000:0c: resource 1 [mem 0x4c000000-0x4c0fffff]
[    0.268299] pci_bus 0000:0c: resource 3 [io  0x0000-0xffff]
[    0.268305] pci_bus 0000:0c: resource 4 [mem 
0x00000000-0xffffffffffffffff]
[    0.268344] NET: Registered protocol family 2
[    0.268447] IP route cache hash table entries: 32768 (order: 6, 
262144 bytes)
[    0.269006] TCP established hash table entries: 131072 (order: 9, 
2097152 bytes)
[    0.270072] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.271493] TCP: Hash tables configured (established 131072 bind 65536)
[    0.271502] TCP reno registered
[    0.271515] UDP hash table entries: 512 (order: 3, 49152 bytes)
[    0.271555] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[    0.271820] NET: Registered protocol family 1
[    0.272046] pci 0000:01:00.0: Boot video device
[    0.272069] PCI: CLS mismatch (256 != 64), using 64 bytes
[    0.276213] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[    0.276228] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[    0.276371] microcode: Microcode Update Driver: v2.00 
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.278331] Initializing RT-Tester: OK
[    0.278488] audit: initializing netlink socket (enabled)
[    0.278520] type=2000 audit(1273564311.277:1): initialized
[    0.289010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.312491] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.312849] fuse init (API version 7.13)
[    0.313639] msgmni has been set to 1970
[    0.314039] SELinux:  Registering netfilter hooks
[    0.315444] alg: No test for stdrng (krng)
[    0.315473] io scheduler noop registered
[    0.316055] io scheduler cfq registered (default)
[    0.317292] vesafb: framebuffer at 0x40000000, mapped to 
0xffffc90000100000, using 3072k, total 3072k
[    0.317302] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.317308] vesafb: scrolling: redraw
[    0.317313] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.365593] Console: switching to colour frame buffer device 128x48
[    0.409799] fb0: VESA VGA frame buffer device
[    0.427032] Linux agpgart interface v0.103
[    0.430944] loop: module loaded
[    0.431433] input: Macintosh mouse button emulation as 
/devices/virtual/input/input0
[    0.433482] ata_piix 0000:00:1f.1: version 2.13
[    0.434018] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.434600] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) 
-> IRQ 18
[    0.435295] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.435933] scsi0 : ata_piix
[    0.437058] scsi1 : ata_piix
[    0.439950] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 
irq 14
[    0.440578] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 
irq 15
[    0.441243] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) 
-> IRQ 19
[    0.441974] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    0.592917] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.593624] scsi2 : ata_piix
[    0.594249] scsi3 : ata_piix
[    0.599362] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 
0x40a0 irq 19
[    0.606272] ata1.00: ATAPI: MATSHITADVD-R   UJ-857D, KCV9, max UDMA/66
[    0.612186] ata1.00: configured for UDMA/66
[    0.614239] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857D 
  KCV9 PQ: 0 ANSI: 5
[    0.618804] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    0.618808] Uniform CD-ROM driver Revision: 3.20
[    0.619234] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.619570] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.672582] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 
0x40a8 irq 19
[    0.683734] usbcore: registered new interface driver usblcd
[    0.695028] usbcore: registered new interface driver usbled
[    0.706743] PNP: No PS/2 controller found. Probing ports directly.
[    0.719281] i8042.c: No controller found.
[    0.731646] mice: PS/2 mouse device common for all mice
[    0.744183] Linux video capture interface: v2.00
[    0.758609] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) 
initialised: dm-devel@redhat.com
[    0.772251] EDAC MC: Ver: 2.1.0 May 11 2010
[    0.786504] cpuidle: using governor ladder
[    0.800663] cpuidle: using governor menu
[    0.819254] usbcore: registered new interface driver hiddev
[    0.845104] usbcore: registered new interface driver usbhid
[    0.860799] usbhid: USB HID core driver
[    0.876015] oprofile: using NMI interrupt.
[    0.891376] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[    0.891695] IPVS: Registered protocols (TCP, AH, ESP)
[    0.891924] IPVS: Connection hash table configured (size=4096, 
memory=64Kbytes)
[    0.891971] IPVS: ipvs loaded.
[    0.892225] Initializing XFRM netlink socket
[    0.892244] NET: Registered protocol family 17
[    0.892301] NET: Registered protocol family 15
[    0.892303] lib80211: common routines for IEEE802.11 drivers
[    0.892306] lib80211_crypt: registered algorithm 'NULL'
[    0.892821] No TPM chip found, activating TPM-bypass!
[    1.047840] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.067656] ata3.01: configured for UDMA/100
[    1.083567] scsi 2:0:1:0: Direct-Access     ATA      FUJITSU MHW2120B 
0081 PQ: 0 ANSI: 5
[    1.100377] sd 2:0:1:0: [sda] 234441648 512-byte logical blocks: (120 
GB/111 GiB)
[    1.100545] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    1.133413] sd 2:0:1:0: [sda] Write Protect is off
[    1.149624] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.165896] sd 2:0:1:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[    1.182967]  sda: sda1 sda2 sda3 sda4
[    1.270559] sd 2:0:1:0: [sda] Attached SCSI disk
[    1.344159] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    1.361097] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[    1.378046] Freeing unused kernel memory: 504k freed
[    1.926899] SELinux: 8192 avtab hash slots, 175799 rules.
[    2.095133] SELinux: 8192 avtab hash slots, 175799 rules.
[    2.473851] SELinux:  7 users, 14 roles, 3026 types, 119 bools, 1 
sens, 256 cats
[    2.490458] SELinux:  77 classes, 175799 rules
[    2.517920] SELinux:  Completing initialization.
[    2.534250] SELinux:  Setting up existing superblocks.
[    2.550371] SELinux: initialized (dev sda3, type ext4), uses xattr
[    2.567134] SELinux: initialized (dev securityfs, type securityfs), 
uses genfs_contexts
[    2.583746] SELinux: initialized (dev selinuxfs, type selinuxfs), 
uses genfs_contexts
[    2.600372] SELinux: initialized (dev mqueue, type mqueue), uses 
transition SIDs
[    2.616955] SELinux: initialized (dev hugetlbfs, type hugetlbfs), 
uses transition SIDs
[    2.633622] SELinux: initialized (dev devpts, type devpts), uses 
transition SIDs
[    2.649964] SELinux: initialized (dev inotifyfs, type inotifyfs), 
uses genfs_contexts
[    2.666100] SELinux: initialized (dev anon_inodefs, type 
anon_inodefs), uses genfs_contexts
[    2.682442] SELinux: initialized (dev pipefs, type pipefs), uses task 
SIDs
[    2.698997] SELinux: initialized (dev debugfs, type debugfs), uses 
genfs_contexts
[    2.716410] SELinux: initialized (dev sockfs, type sockfs), uses task 
SIDs
[    2.733275] SELinux: initialized (dev tmpfs, type tmpfs), uses 
transition SIDs
[    2.750141] SELinux: initialized (dev proc, type proc), uses 
genfs_contexts
[    2.767070] SELinux: initialized (dev bdev, type bdev), uses 
genfs_contexts
[    2.783638] SELinux: initialized (dev rootfs, type rootfs), uses 
genfs_contexts
[    2.800155] SELinux: initialized (dev sysfs, type sysfs), uses 
genfs_contexts
[    2.837370] type=1403 audit(1273564313.837:2): policy loaded 
auid=4294967295 ses=4294967295
[    3.689816] usbcore: registered new interface driver uvcvideo
[    3.707461] USB Video Class driver (v0.1.0)
[    3.732724] applesmc: Apple MacBook Pro detected:
[    3.751037] applesmc:  - Model with accelerometer
[    3.769847] applesmc:  - Model with light sensors and backlight
[    3.788595] applesmc:  - Model with 12 temperature sensors
[    3.807926] applesmc: device has already been initialized (0xe0, 0x00).
[    3.807928] applesmc: device successfully initialized.
[    3.826909] applesmc: 2 fans found.
[    3.846517] input: applesmc as 
/devices/platform/applesmc.768/input/input1
[    3.865125] Registered led device: smc::kbd_backlight
[    3.883846] applesmc: driver successfully loaded.
[    3.914201] usbcore: registered new interface driver appletouch
[    3.953843] ACPI: SSDT 000000003feb8c10 002AE (v01 APPLE   Cpu0Ist 
00003000 INTL 20050309)
[    3.974371] ACPI: SSDT 000000003feb8910 002A0 (v01 APPLE   Cpu0Cst 
00003001 INTL 20050309)
[    3.994867] Monitor-Mwait will be used to enter C-1 state
[    3.994913] Monitor-Mwait will be used to enter C-2 state
[    3.994957] Monitor-Mwait will be used to enter C-3 state
[    3.994968] Marking TSC unstable due to TSC halts in idle
[    4.014243] Switching to clocksource hpet
[    4.016958] ACPI: SSDT 000000003feb8f10 00087 (v01 APPLE   Cpu1Ist 
00003000 INTL 20050309)
[    4.018244] ACPI: SSDT 000000003feb7f10 00085 (v01 APPLE   Cpu1Cst 
00003000 INTL 20050309)
[    4.130576] Bluetooth: Core ver 2.15
[    4.156847] NET: Registered protocol family 31
[    4.176676] Bluetooth: HCI device and connection manager initialized
[    4.196874] Bluetooth: HCI socket layer initialized
[    4.221076] Bluetooth: L2CAP ver 2.14
[    4.240644] Bluetooth: L2CAP socket layer initialized
[    4.270139] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.296119] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    4.316286] usbcore: registered new interface driver btusb
[    4.357507] Bluetooth: RFCOMM TTY layer initialized
[    4.383453] Bluetooth: RFCOMM socket layer initialized
[    4.403365] Bluetooth: RFCOMM ver 1.11
[    4.429141] Bluetooth: HCI UART driver ver 2.2
[    4.448753] Bluetooth: HCI H4 protocol initialized
[    4.474685] Bluetooth: HCI BCSP protocol initialized
[    4.511455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.531880] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) 
-> IRQ 23
[    4.552618] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.552622] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.573402] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned 
bus number 1
[    4.594424] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    4.615250] ehci_hcd 0000:00:1d.7: debug port 1
[    4.639400] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    4.639454] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[    4.668385] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.694746] hub 1-0:1.0: USB hub found
[    4.714313] hub 1-0:1.0: 8 ports detected
[    4.739510] uhci_hcd: USB Universal Host Controller Interface driver
[    4.758513] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) 
-> IRQ 23
[    4.777234] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.777239] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.795119] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned 
bus number 2
[    4.813348] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[    4.832039] hub 2-0:1.0: USB hub found
[    4.850074] hub 2-0:1.0: 2 ports detected
[    4.868308] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) 
-> IRQ 19
[    4.886493] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.886497] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.904293] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned 
bus number 3
[    4.922338] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[    4.940626] hub 3-0:1.0: USB hub found
[    4.957767] hub 3-0:1.0: 2 ports detected
[    4.974696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) 
-> IRQ 18
[    4.991448] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.991452] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.008039] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned 
bus number 4
[    5.024827] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    5.042044] hub 4-0:1.0: USB hub found
[    5.058252] hub 4-0:1.0: 2 ports detected
[    5.074516] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) 
-> IRQ 16
[    5.090776] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.090780] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.106837] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned 
bus number 5
[    5.123264] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[    5.140224] hub 5-0:1.0: USB hub found
[    5.156436] hub 5-0:1.0: 2 ports detected
[    5.190290] usb 1-4: new high speed USB device using ehci_hcd and 
address 3
[    5.194416] ieee1394: raw1394: /dev/raw1394 device initialized
[    5.314194] alg: No test for cipher_null (cipher_null-generic)
[    5.358777] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[    5.376514] alg: No test for digest_null (digest_null-generic)
[    5.394044] alg: No test for compress_null (compress_null-generic)
[    5.413146] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[    5.433446] uvcvideo: UVC non compliance - GET_DEF(PROBE) not 
supported. Enabling workaround.
[    5.577940] SELinux: initialized (dev tmpfs, type tmpfs), uses 
transition SIDs
[    5.862068] usb 2-2: new full speed USB device using uhci_hcd and 
address 2
[    5.934341] udev: starting version 147
[    6.091059] input: Apple Computer Apple Internal Keyboard / Trackpad 
as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[    6.195742] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard 
[Apple Computer Apple Internal Keyboard / Trackpad] on 
usb-0000:00:1d.0-2/input0
[    6.197493] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) 
-> IRQ 19
[    6.197500] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts 
with ACPI region SMBI [0xefa0-0xefaf]
[    6.197502] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[    7.017921] input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    7.022182] sky2 driver version 1.26
[    7.022239] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.022255] sky2 0000:02:00.0: setting latency timer to 64
[    7.022297] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[    7.022423] sky2 0000:02:00.0: irq 24 for MSI/MSI-X
[    7.025070] sky2 eth0: addr 00:17:f2:cb:e3:71
[    7.027629] ohci1394 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) 
-> IRQ 19
[    7.158316] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] 
MMIO=[4c004000-4c0047ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[    7.250215] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) 
-> IRQ 22
[    7.338005] ACPI: Lid Switch [LID0]
[    7.341490] HDA Intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[    7.341548] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.357595] appletouch: Geyser mode initialized.
[    7.357759] input: appletouch as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[    7.363772] input: Apple Computer Apple Internal Keyboard / Trackpad 
as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input5
[    7.363878] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device 
[Apple Computer Apple Internal Keyboard / Trackpad] on 
usb-0000:00:1d.0-2/input2
[    7.518433] power_supply ADP1: uevent
[    7.518436] power_supply ADP1: No power supply yet
[    7.518467] power_supply ADP1: power_supply_changed
[    7.518472] ACPI: AC Adapter [ADP1] (on-line)
[    7.544264] power_supply ADP1: power_supply_changed_work
[    7.544267] power_supply ADP1: power_supply_update_gen_leds 1
[    7.544286] power_supply ADP1: uevent
[    7.544288] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[    7.544292] power_supply ADP1: Static prop TYPE=Mains
[    7.544296] power_supply ADP1: 1 dynamic props
[    7.544299] power_supply ADP1: prop ONLINE=1
[    7.613988] power_supply BAT0: uevent
[    7.613994] power_supply BAT0: No power supply yet
[    7.614137] power_supply BAT0: power_supply_changed
[    7.614149] power_supply BAT0: power_supply_changed_work
[    7.640451] power_supply BAT0: power_supply_update_bat_leds 0
[    7.640925] power_supply BAT0: uevent
[    7.640930] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[    7.640939] power_supply BAT0: Static prop TYPE=Battery
[    7.641023] power_supply BAT0: 13 dynamic props
[    7.641037] power_supply BAT0: prop STATUS=Unknown
[    7.641048] power_supply BAT0: prop PRESENT=1
[    7.641059] power_supply BAT0: prop TECHNOLOGY=Unknown
[    7.641068] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[    7.641079] power_supply BAT0: prop VOLTAGE_NOW=12481000
[    7.641087] power_supply BAT0: prop CURRENT_NOW=0
[    7.641095] power_supply BAT0: prop POWER_NOW=0
[    7.641103] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[    7.641114] power_supply BAT0: prop ENERGY_FULL=47360000
[    7.641122] power_supply BAT0: prop ENERGY_NOW=46810000
[    7.641131] power_supply BAT0: prop MODEL_NAME=ASMB012
[    7.641139] power_supply BAT0: prop MANUFACTURER=SMPN012
[    7.641147] power_supply BAT0: prop SERIAL_NUMBER=
[    7.641507] power_supply BAT0: uevent
[    7.641513] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[    7.641522] power_supply BAT0: Static prop TYPE=Battery
[    7.641530] power_supply BAT0: 13 dynamic props
[    7.641537] power_supply BAT0: prop STATUS=Unknown
[    7.641546] power_supply BAT0: prop PRESENT=1
[    7.641556] power_supply BAT0: prop TECHNOLOGY=Unknown
[    7.641566] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[    7.641578] power_supply BAT0: prop VOLTAGE_NOW=12481000
[    7.641587] power_supply BAT0: prop CURRENT_NOW=0
[    7.641596] power_supply BAT0: prop POWER_NOW=0
[    7.641606] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[    7.641616] power_supply BAT0: prop ENERGY_FULL=47360000
[    7.641626] power_supply BAT0: prop ENERGY_NOW=46810000
[    7.641636] power_supply BAT0: prop MODEL_NAME=ASMB012
[    7.641645] power_supply BAT0: prop MANUFACTURER=SMPN012
[    7.641655] power_supply BAT0: prop SERIAL_NUMBER=
[    7.663896] ACPI: Battery Slot [BAT0] (battery present)
[    7.698556] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    7.735281] ACPI: Power Button [PWRB]
[    7.748032] usb 4-2: new full speed USB device using uhci_hcd and 
address 2
[    7.772215] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> 
IRQ 17
[    7.772228] ath9k 0000:03:00.0: setting latency timer to 64
[    7.847212] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[    7.896301] ACPI: Sleep Button [SLPB]
[    7.906715] ath: EEPROM regdomain: 0x64
[    7.906717] ath: EEPROM indicates we should expect a direct regpair map
[    7.906721] ath: Country alpha2 being used: 00
[    7.906722] ath: Regpair used: 0x64
[    7.931261] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    7.935534] hda_codec: STAC922x, Apple subsys_id=106b1e00
[    7.990526] ACPI: Power Button [PWRF]
[    7.997530] phy0: Selected rate control algorithm 'ath9k_rate_control'
[    7.998053] Registered led device: ath9k-phy0::radio
[    7.998108] Registered led device: ath9k-phy0::assoc
[    7.998170] Registered led device: ath9k-phy0::tx
[    7.998225] Registered led device: ath9k-phy0::rx
[    7.998273] phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 
mem=0xffffc90000bc0000, irq=17
[    8.041727] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 
Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[    8.323115] usb 5-1: new full speed USB device using uhci_hcd and 
address 2
[    8.554846] usbhid 5-1:1.0: couldn't find an input interrupt endpoint
[    8.615707] ieee1394: Host added: ID:BUS[0-00:1023] 
GUID[0019e3fffe2ad87e]
[    8.681077] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 
64 rq 0 len 0 ret -84
[    8.705141] usb 5-1: USB disconnect, address 2
[    8.916170] SELinux: initialized (dev tmpfs, type tmpfs), uses 
transition SIDs
[    9.009347] Adding 390616k swap on /dev/sda4.  Priority:1 extents:1 
across:390616k
[    9.411314] usb 5-1: new full speed USB device using uhci_hcd and 
address 3
[   10.944574] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.981399] nf_conntrack version 0.5.0 (7884 buckets, 31536 max)
[   10.984245] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. 
Please use
[   10.984248] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack 
module option or
[   10.984250] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   13.176234] applesmc: light sensor data length set to 6
[   16.399290] sky2 eth0: enabling interface
[   19.924510] type=1100 audit(1273564330.924:3): user pid=2016 uid=0 
auid=4294967295 ses=4294967295 
subj=system_u:system_r:local_login_t:s0-s0:c0.c255 
msg='op=PAM:authentication acct="name" exe="/bin/login" hostname=? 
addr=? terminal=/dev/tty1 res=success'
[   19.934946] type=1101 audit(1273564330.934:4): user pid=2016 uid=0 
auid=4294967295 ses=4294967295 
subj=system_u:system_r:local_login_t:s0-s0:c0.c255 
msg='op=PAM:accounting acct="name" exe="/bin/login" hostname=? addr=? 
terminal=/dev/tty1 res=success'
[   20.009616] type=1006 audit(1273564331.009:5): login pid=2016 uid=0 
old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1
[   20.095026] type=2300 audit(1273564331.094:6): user pid=2016 uid=0 
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255 
msg='pam: default-context=name:staff_r:staff_t:s0 
selected-context=name:staff_r:staff_t:s0: exe="/bin/login" hostname=? 
addr=? terminal=tty1 res=success'
[   20.178135] type=1105 audit(1273564331.178:7): user pid=2016 uid=0 
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255 
msg='op=PAM:session_open acct="name" exe="/bin/login" hostname=? addr=? 
terminal=/dev/tty1 res=success'
[   20.191074] type=1103 audit(1273564331.190:8): user pid=2016 uid=0 
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255 
msg='op=PAM:setcred acct="name" exe="/bin/login" hostname=? addr=? 
terminal=/dev/tty1 res=success'
[   20.191379] type=1112 audit(1273564331.191:9): user pid=2016 uid=0 
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255 
msg='op=login acct="name" exe="/bin/login" hostname=? addr=? 
terminal=/dev/tty1 res=success'
[   22.308976] wlan0: direct probe to AP 00:1e:2a:00:67:f0 (try 1)
[   22.311733] wlan0: direct probe responded
[   22.311741] wlan0: authenticate with AP 00:1e:2a:00:67:f0 (try 1)
[   22.318090] wlan0: authenticated
[   22.318223] wlan0: associate with AP 00:1e:2a:00:67:f0 (try 1)
[   22.320730] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431 
status=0 aid=1)
[   22.320736] wlan0: associated
[   23.713535] [drm] Initialized drm 1.1.0 20060810
[   23.849540] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.849545] Bluetooth: BNEP filters: protocol multicast
[   23.928446] Bluetooth: SCO (Voice Link) ver 0.6
[   23.928449] Bluetooth: SCO socket layer initialized
[   23.929616] [drm] radeon defaulting to userspace modesetting.
[   23.930408] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.930416] pci 0000:01:00.0: setting latency timer to 64
[   23.930766] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 
on minor 0
[   24.156429] [drm] Setting GART location based on new memory map
[   24.158069] [drm] Loading R500 Microcode
[   24.158077] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[   24.295079] [drm] Num pipes: 1
[   24.295092] [drm] writeback test succeeded in 1 usecs
[   27.435674] magicmouse 0005:05AC:030D.0004: claimed by neither input, 
hiddev nor hidraw
[   27.435686] magicmouse 0005:05AC:030D.0004: magicmouse hw start failed
[   27.435753] type=1400 audit(1273564338.435:10): avc:  denied  { 
search } for  pid=2105 comm="bluetoothd" name="hid" dev=debugfs ino=1056 
scontext=system_u:system_r:bluetooth_t:s0-s0:c0.c255 
tcontext=system_u:object_r:debugfs_t:s0 tclass=dir
[   27.435927] type=1300 audit(1273564338.435:10): arch=c000003e 
syscall=16 success=yes exit=0 a0=18 a1=400448c8 a2=7fd2680460f0 a3=10 
items=0 ppid=1 pid=2105 auid=4294967295 uid=0 gid=0 euid=0 suid=0 
fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 
comm="bluetoothd" exe="/usr/sbin/bluetoothd" 
subj=system_u:system_r:bluetooth_t:s0-s0:c0.c255 key=(null)
[   74.910194] usb 2-1: new low speed USB device using uhci_hcd and 
address 3
[   75.094202] input: Mitsumi Electric Apple Optical USB Mouse as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input9
[   75.094598] apple 0003:05AC:0304.0005: input: USB HID v1.10 Mouse 
[Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.0-1/input0


I'm a bit tired now.. will test commits
in the morning over here with git revert

Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 21:52     ` Jiri Kosina
  2010-05-10 22:15       ` Justin P. Mattock
@ 2010-05-11 14:26       ` Justin P. Mattock
  2010-05-11 16:32       ` Justin P. Mattock
  2 siblings, 0 replies; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-11 14:26 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: linux-bluetooth, Linux Kernel Mailing List

o.k... I went and tested individual commits
and right now if I git revert 28918c
on the latest head, I don't receive
the "claimed by neither input, hiddev nor hidraw"
message, and I get all functionality back with the mouse.
(without having hiddraw enabled in the kernel.

Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: magicmouse: claimed by neither input, hiddev nor hidraw
  2010-05-10 21:52     ` Jiri Kosina
  2010-05-10 22:15       ` Justin P. Mattock
  2010-05-11 14:26       ` Justin P. Mattock
@ 2010-05-11 16:32       ` Justin P. Mattock
  2 siblings, 0 replies; 14+ messages in thread
From: Justin P. Mattock @ 2010-05-11 16:32 UTC (permalink / raw)
  To: Jiri Kosina; +Cc: linux-bluetooth, Linux Kernel Mailing List

o.k. peoples.. I've posted a patch
that gets everything(hopefully), working
over here.
subject: HID:magicmouse: This fixes a connection problem with the 
magicmouse.

please check it out, and let me know..

Justin P. Mattock

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2010-05-11 16:32 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-10 20:41 magicmouse: claimed by neither input, hiddev nor hidraw Justin Mattock
2010-05-10 21:08 ` Justin P. Mattock
2010-05-10 21:34 ` Jiri Kosina
2010-05-10 21:39   ` Justin Mattock
2010-05-10 21:52     ` Jiri Kosina
2010-05-10 22:15       ` Justin P. Mattock
2010-05-11  2:28         ` Michael Poole
2010-05-11  2:45           ` Justin P. Mattock
2010-05-11  2:58           ` Justin P. Mattock
2010-05-11  7:47             ` Jiri Kosina
2010-05-11  7:56               ` Justin P. Mattock
2010-05-11  8:01               ` Justin P. Mattock
2010-05-11 14:26       ` Justin P. Mattock
2010-05-11 16:32       ` Justin P. Mattock

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).