From: "Brian J. Murrell" <brian@interlinx.bc.ca>
To: Brad Midgley <bmidgley-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: how to set adapter to master with bluez 4.69?
Date: Wed, 23 Mar 2011 07:43:34 -0400 [thread overview]
Message-ID: <4D89DCE6.7050106@interlinx.bc.ca> (raw)
In-Reply-To: <AANLkTi=N_5BaEOaaFsTHhNF82Vo83bzeNuzqmd9rMU3j@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2172 bytes --]
On 11-03-14 11:29 AM, Brad Midgley wrote:
> Brian,
Hey Brad,
> iirc, the hcitool output tells you the role of the local adapter in
> the connection. So when you see 'master' in that list, it's what you
> want. You should also be requesting master when you try hcitool.
Does the above still jive with all of this:
$ hciconfig hci0 lm
hci0: Type: BR/EDR Bus: USB
BD Address: 00:02:72:1E:E0:12 ACL MTU: 1021:7 SCO MTU: 64:1
Link mode: SLAVE ACCEPT
Notice the B/T adapter's link mode is set to slave, yet...
$ hcitool con
Connections:
> ACL 00:1F:20:0F:30:6A handle 11 state 1 lm MASTER
In the connection with the mouse, the B/T adapter is master.
I can change it successfully:
brian@pc:~$ sudo hciconfig hci0 lm master,accept
brian@pc:~$ hciconfig hci0 lm
hci0: Type: BR/EDR Bus: USB
BD Address: 00:02:72:1E:E0:12 ACL MTU: 1021:7 SCO MTU: 64:1
Link mode: ACCEPT MASTER
Which doesn't change the connection with the mouse:
$ hcitool con
Connections:
> ACL 00:1F:20:0F:30:6A handle 11 state 1 lm MASTER
When I connect the headset using the bluetooth-applet:
$ hcitool con
Connections:
< eSCO 00:18:6B:E5:4F:7E handle 6 state 1 lm SLAVE
< ACL 00:18:6B:E5:4F:7E handle 12 state 1 lm MASTER AUTH ENCRYPT
> ACL 00:1F:20:0F:30:6A handle 11 state 1 lm MASTER
The connection with the headset itself has the B/T adapter as master but
this eSCO connection is slave?
Oh wait. The eSCO connection disappeared now:
$ hcitool con
Connections:
< ACL 00:18:6B:E5:4F:7E handle 12 state 1 lm MASTER AUTH ENCRYPT
> ACL 00:1F:20:0F:30:6A handle 11 state 1 lm MASTER
Now that I play something through the headset it comes back:
Connections:
< eSCO 00:18:6B:E5:4F:7E handle 6 state 1 lm SLAVE
< ACL 00:18:6B:E5:4F:7E handle 12 state 1 lm MASTER AUTH ENCRYPT
> ACL 00:1F:20:0F:30:6A handle 11 state 1 lm MASTER
I guess that eSCO connection is only active when there is audio sent to
the headset perhaps.
I sure wish I could get all of this to work reliably. Even if I had to
follow a recipe of manual steps -- something I have not yet been able to
figure out with any consistency.
b.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2011-03-23 11:43 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-03 2:07 how to set adapter to master with bluez 4.69? Brian J. Murrell
2011-03-06 22:28 ` Brian J. Murrell
2011-03-07 1:08 ` Brad Midgley
2011-03-07 21:13 ` Brian J. Murrell
2011-03-07 22:57 ` Andrei Warkentin
2011-03-08 11:08 ` Brian J. Murrell
2011-03-09 11:22 ` Brian J. Murrell
2011-03-07 23:09 ` Brad Midgley
2011-03-14 3:46 ` Brad Midgley
2011-03-14 11:00 ` Brian J. Murrell
2011-03-14 12:29 ` Brian J. Murrell
2011-03-14 14:07 ` Brian J. Murrell
2011-03-14 15:29 ` Brad Midgley
2011-03-15 0:23 ` Brian J. Murrell
2011-03-15 12:26 ` Brian J. Murrell
2011-03-15 12:43 ` Brian J. Murrell
2011-03-15 15:25 ` Brad Midgley
2011-03-17 13:10 ` Brian J. Murrell
2011-03-17 13:22 ` Brian J. Murrell
2011-03-17 15:46 ` Brad Midgley
2011-03-23 11:43 ` Brian J. Murrell [this message]
2011-03-23 12:20 ` Brian J. Murrell
2011-03-23 16:24 ` Brad Midgley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D89DCE6.7050106@interlinx.bc.ca \
--to=brian@interlinx.bc.ca \
--cc=bmidgley-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).